/*
 *  Copyright (c) 2017 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include <bitset>
#include <string>

#include "absl/memory/memory.h"
#include "api/audio/echo_canceller3_factory.h"
#include "modules/audio_processing/aec_dump/aec_dump_factory.h"
#include "modules/audio_processing/include/audio_processing.h"
#include "rtc_base/arraysize.h"
#include "rtc_base/numerics/safe_minmax.h"
#include "rtc_base/task_queue.h"
#include "system_wrappers/include/field_trial.h"
#include "test/fuzzers/audio_processing_fuzzer_helper.h"
#include "test/fuzzers/fuzz_data_helper.h"

namespace webrtc {
namespace {

const std::string kFieldTrialNames[] = {
    "WebRTC-Aec3AdaptErleOnLowRenderKillSwitch",
    "WebRTC-Aec3AgcGainChangeResponseKillSwitch",
    "WebRTC-Aec3BoundedNearendKillSwitch",
    "WebRTC-Aec3EarlyShadowFilterJumpstartKillSwitch",
    "WebRTC-Aec3EnableAdaptiveEchoReverbEstimation",
    "WebRTC-Aec3EnableLegacyDominantNearend",
    "WebRTC-Aec3EnableUnityInitialRampupGain",
    "WebRTC-Aec3EnableUnityNonZeroRampupGain",
    "WebRTC-Aec3EnforceSkewHysteresis1",
    "WebRTC-Aec3EnforceSkewHysteresis2",
    "WebRTC-Aec3FilterAnalyzerPreprocessorKillSwitch",
    "WebRTC-Aec3MisadjustmentEstimatorKillSwitch",
    "WebRTC-Aec3NewFilterParamsKillSwitch",
    "WebRTC-Aec3NewRenderBufferingKillSwitch",
    "WebRTC-Aec3OverrideEchoPathGainKillSwitch",
    "WebRTC-Aec3RapidAgcGainRecoveryKillSwitch",
    "WebRTC-Aec3ResetErleAtGainChangesKillSwitch",
    "WebRTC-Aec3ReverbBasedOnRenderKillSwitch",
    "WebRTC-Aec3ReverbModellingKillSwitch",
    "WebRTC-Aec3ShadowFilterBoostedJumpstartKillSwitch",
    "WebRTC-Aec3ShadowFilterJumpstartKillSwitch",
    "WebRTC-Aec3ShortReverbKillSwitch",
    "WebRTC-Aec3SmoothSignalTransitionsKillSwitch",
    "WebRTC-Aec3SmoothUpdatesTailFreqRespKillSwitch",
    "WebRTC-Aec3SoftTransparentModeKillSwitch",
    "WebRTC-Aec3StandardNonlinearReverbModelKillSwitch",
    "WebRTC-Aec3StrictDivergenceCheckKillSwitch",
    "WebRTC-Aec3UseLegacyNormalSuppressorTuning",
    "WebRTC-Aec3UseOffsetBlocks",
    "WebRTC-Aec3UseShortDelayEstimatorWindow",
    "WebRTC-Aec3UseStationarityPropertiesKillSwitch",
    "WebRTC-Aec3UtilizeShadowFilterOutputKillSwitch",
    "WebRTC-Aec3ZeroExternalDelayHeadroomKillSwitch",
    "WebRTC-Aec3EarlyDelayDetectionKillSwitch",
};

std::unique_ptr<AudioProcessing> CreateApm(test::FuzzDataHelper* fuzz_data,
                                           std::string* field_trial_string,
                                           rtc::TaskQueue* worker_queue) {
  // Parse boolean values for optionally enabling different
  // configurable public components of APM.
  bool exp_agc = fuzz_data->ReadOrDefaultValue(true);
  bool exp_ns = fuzz_data->ReadOrDefaultValue(true);
  static_cast<void>(fuzz_data->ReadOrDefaultValue(true));
  bool ef = fuzz_data->ReadOrDefaultValue(true);
  bool raf = fuzz_data->ReadOrDefaultValue(true);
  static_cast<void>(fuzz_data->ReadOrDefaultValue(true));
  static_cast<void>(fuzz_data->ReadOrDefaultValue(true));
  bool red = fuzz_data->ReadOrDefaultValue(true);
  bool hpf = fuzz_data->ReadOrDefaultValue(true);
  bool aec3 = fuzz_data->ReadOrDefaultValue(true);

  bool use_aec = fuzz_data->ReadOrDefaultValue(true);
  bool use_aecm = fuzz_data->ReadOrDefaultValue(true);
  bool use_agc = fuzz_data->ReadOrDefaultValue(true);
  bool use_ns = fuzz_data->ReadOrDefaultValue(true);
  bool use_le = fuzz_data->ReadOrDefaultValue(true);
  bool use_vad = fuzz_data->ReadOrDefaultValue(true);
  bool use_agc_limiter = fuzz_data->ReadOrDefaultValue(true);
  bool use_agc2_limiter = fuzz_data->ReadOrDefaultValue(true);

  // Read an int8 value, but don't let it be too large or small.
  const float gain_controller2_gain_db =
      rtc::SafeClamp<int>(fuzz_data->ReadOrDefaultValue<int8_t>(0), -50, 50);

  constexpr size_t kNumFieldTrials = arraysize(kFieldTrialNames);
  // Verify that the read data type has enough bits to fuzz the field trials.
  using FieldTrialBitmaskType = uint64_t;
  static_assert(kNumFieldTrials <= sizeof(FieldTrialBitmaskType) * 8,
                "FieldTrialBitmaskType is not large enough.");
  std::bitset<kNumFieldTrials> field_trial_bitmask(
      fuzz_data->ReadOrDefaultValue<FieldTrialBitmaskType>(0));
  for (size_t i = 0; i < kNumFieldTrials; ++i) {
    if (field_trial_bitmask[i]) {
      *field_trial_string += kFieldTrialNames[i] + "/Enabled/";
    }
  }
  field_trial::InitFieldTrialsFromString(field_trial_string->c_str());

  // Ignore a few bytes. Bytes from this segment will be used for
  // future config flag changes. We assume 40 bytes is enough for
  // configuring the APM.
  constexpr size_t kSizeOfConfigSegment = 40;
  RTC_DCHECK(kSizeOfConfigSegment >= fuzz_data->BytesRead());
  static_cast<void>(
      fuzz_data->ReadByteArray(kSizeOfConfigSegment - fuzz_data->BytesRead()));

  // Filter out incompatible settings that lead to CHECK failures.
  if ((use_aecm && use_aec) ||      // These settings cause CHECK failure.
      (use_aecm && aec3 && use_ns)  // These settings trigger webrtc:9489.
      ) {
    return nullptr;
  }

  // Components can be enabled through webrtc::Config and
  // webrtc::AudioProcessingConfig.
  Config config;

  std::unique_ptr<EchoControlFactory> echo_control_factory;
  if (aec3) {
    echo_control_factory.reset(new EchoCanceller3Factory());
  }

  config.Set<ExperimentalAgc>(new ExperimentalAgc(exp_agc));
  config.Set<ExperimentalNs>(new ExperimentalNs(exp_ns));
  config.Set<ExtendedFilter>(new ExtendedFilter(ef));
  config.Set<RefinedAdaptiveFilter>(new RefinedAdaptiveFilter(raf));
  config.Set<DelayAgnostic>(new DelayAgnostic(true));

  std::unique_ptr<AudioProcessing> apm(
      AudioProcessingBuilder()
          .SetEchoControlFactory(std::move(echo_control_factory))
          .Create(config));

#ifdef WEBRTC_LINUX
  apm->AttachAecDump(AecDumpFactory::Create("/dev/null", -1, worker_queue));
#endif

  webrtc::AudioProcessing::Config apm_config;
  apm_config.echo_canceller.enabled = use_aec || use_aecm;
  apm_config.echo_canceller.mobile_mode = use_aecm;
  apm_config.residual_echo_detector.enabled = red;
  apm_config.high_pass_filter.enabled = hpf;
  apm_config.gain_controller2.enabled = use_agc2_limiter;

  apm_config.gain_controller2.fixed_gain_db = gain_controller2_gain_db;

  apm->ApplyConfig(apm_config);

  apm->gain_control()->Enable(use_agc);
  apm->noise_suppression()->Enable(use_ns);
  apm->level_estimator()->Enable(use_le);
  apm->voice_detection()->Enable(use_vad);
  apm->gain_control()->enable_limiter(use_agc_limiter);

  return apm;
}
}  // namespace

void FuzzOneInput(const uint8_t* data, size_t size) {
  test::FuzzDataHelper fuzz_data(rtc::ArrayView<const uint8_t>(data, size));
  // This string must be in scope during execution, according to documentation
  // for field_trial.h. Hence it's created here and not in CreateApm.
  std::string field_trial_string = "";

  std::unique_ptr<rtc::TaskQueue> worker_queue(
      new rtc::TaskQueue("rtc-low-prio", rtc::TaskQueue::Priority::LOW));
  auto apm = CreateApm(&fuzz_data, &field_trial_string, worker_queue.get());

  if (apm) {
    FuzzAudioProcessing(&fuzz_data, std::move(apm));
  }
}
}  // namespace webrtc