Remove non-API beamformer references
This removes beamformer references from audioproc_f, some non-beamformer tests, and a few other bits and bobs.
The beamformer is, after this, very decoupled from the remaining APM code.
Bug: webrtc:9402
Change-Id: Iaafc95517013d7a17723ef2329f17b5e09069bc9
Reviewed-on: https://webrtc-review.googlesource.com/83983
Reviewed-by: Minyue Li <minyue@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23649}diff --git a/modules/audio_processing/audio_processing_impl.h b/modules/audio_processing/audio_processing_impl.h
index ff6448f..f0f823f 100644
--- a/modules/audio_processing/audio_processing_impl.h
+++ b/modules/audio_processing/audio_processing_impl.h
@@ -244,8 +244,6 @@
// acquired.
void InitializeTransient()
RTC_EXCLUSIVE_LOCKS_REQUIRED(crit_render_, crit_capture_);
- void InitializeBeamformer()
- RTC_EXCLUSIVE_LOCKS_REQUIRED(crit_render_, crit_capture_);
void InitializeIntelligibility()
RTC_EXCLUSIVE_LOCKS_REQUIRED(crit_render_, crit_capture_);
int InitializeLocked(const ProcessingConfig& config)
diff --git a/modules/audio_processing/audio_processing_performance_unittest.cc b/modules/audio_processing/audio_processing_performance_unittest.cc
index d312137..2e985ce 100644
--- a/modules/audio_processing/audio_processing_performance_unittest.cc
+++ b/modules/audio_processing/audio_processing_performance_unittest.cc
@@ -49,7 +49,6 @@
enum class SettingsType {
kDefaultApmDesktop,
kDefaultApmMobile,
- kDefaultApmDesktopAndBeamformer,
kDefaultApmDesktopAndIntelligibilityEnhancer,
kAllSubmodulesTurnedOff,
kDefaultApmDesktopWithoutDelayAgnostic,
@@ -114,17 +113,6 @@
}
}
#endif
-
- const SettingsType beamformer_settings[] = {
- SettingsType::kDefaultApmDesktopAndBeamformer};
-
- const int beamformer_sample_rates[] = {8000, 16000, 32000, 48000};
-
- for (auto sample_rate : beamformer_sample_rates) {
- for (auto settings : beamformer_settings) {
- simulation_configs.push_back(SimulationConfig(sample_rate, settings));
- }
- }
#endif
const SettingsType mobile_settings[] = {SettingsType::kDefaultApmMobile};
@@ -149,9 +137,6 @@
case SettingsType::kDefaultApmDesktop:
description = "DefaultApmDesktop";
break;
- case SettingsType::kDefaultApmDesktopAndBeamformer:
- description = "DefaultApmDesktopAndBeamformer";
- break;
case SettingsType::kDefaultApmDesktopAndIntelligibilityEnhancer:
description = "DefaultApmDesktopAndIntelligibilityEnhancer";
break;
@@ -543,18 +528,6 @@
config->Set<DelayAgnostic>(new DelayAgnostic(true));
};
- // Lambda function for adding beamformer settings to a config.
- auto add_beamformer_config = [](Config* config) {
- const size_t num_mics = 2;
- const std::vector<Point> array_geometry =
- ParseArrayGeometry("0 0 0 0.05 0 0", num_mics);
- RTC_CHECK_EQ(array_geometry.size(), num_mics);
-
- config->Set<Beamforming>(
- new Beamforming(true, array_geometry,
- SphericalPointf(DegreesToRadians(90), 0.f, 1.f)));
- };
-
int num_capture_channels = 1;
switch (simulation_config_.simulation_settings) {
case SettingsType::kDefaultApmMobile: {
@@ -572,17 +545,6 @@
apm_->SetExtraOptions(config);
break;
}
- case SettingsType::kDefaultApmDesktopAndBeamformer: {
- Config config;
- add_beamformer_config(&config);
- add_default_desktop_config(&config);
- apm_.reset(AudioProcessingBuilder().Create(config));
- ASSERT_TRUE(!!apm_);
- set_default_desktop_apm_runtime_settings(apm_.get());
- apm_->SetExtraOptions(config);
- num_capture_channels = 2;
- break;
- }
case SettingsType::kDefaultApmDesktopAndIntelligibilityEnhancer: {
Config config;
config.Set<Intelligibility>(new Intelligibility(true));
diff --git a/modules/audio_processing/audio_processing_unittest.cc b/modules/audio_processing/audio_processing_unittest.cc
index 0954190..4b244fc 100644
--- a/modules/audio_processing/audio_processing_unittest.cc
+++ b/modules/audio_processing/audio_processing_unittest.cc
@@ -21,7 +21,6 @@
#include "common_audio/signal_processing/include/signal_processing_library.h"
#include "modules/audio_processing/aec_dump/aec_dump_factory.h"
#include "modules/audio_processing/audio_processing_impl.h"
-#include "modules/audio_processing/beamformer/mock_nonlinear_beamformer.h"
#include "modules/audio_processing/common.h"
#include "modules/audio_processing/include/audio_processing.h"
#include "modules/audio_processing/include/mock_audio_processing.h"
diff --git a/modules/audio_processing/beamformer/nonlinear_beamformer_test.cc b/modules/audio_processing/beamformer/nonlinear_beamformer_test.cc
index 296cd6d..7db5b9f3 100644
--- a/modules/audio_processing/beamformer/nonlinear_beamformer_test.cc
+++ b/modules/audio_processing/beamformer/nonlinear_beamformer_test.cc
@@ -37,6 +37,29 @@
"in as a single band, unlike the audio processing interface which splits\n"
"signals into multiple bands.\n";
+std::vector<Point> ParseArrayGeometry(const std::string& mic_positions) {
+ const std::vector<float> values = ParseList<float>(mic_positions);
+ const size_t num_mics =
+ rtc::CheckedDivExact(values.size(), static_cast<size_t>(3));
+ RTC_CHECK_GT(num_mics, 0) << "mic_positions is not large enough.";
+
+ std::vector<Point> result;
+ result.reserve(num_mics);
+ for (size_t i = 0; i < values.size(); i += 3) {
+ result.push_back(Point(values[i + 0], values[i + 1], values[i + 2]));
+ }
+
+ return result;
+}
+
+std::vector<Point> ParseArrayGeometry(const std::string& mic_positions,
+ size_t num_mics) {
+ std::vector<Point> result = ParseArrayGeometry(mic_positions);
+ RTC_CHECK_EQ(result.size(), num_mics)
+ << "Could not parse mic_positions or incorrect number of points.";
+ return result;
+}
+
} // namespace
int main(int argc, char* argv[]) {
diff --git a/modules/audio_processing/test/audio_processing_simulator.cc b/modules/audio_processing/test/audio_processing_simulator.cc
index ed30230..a0740cf 100644
--- a/modules/audio_processing/test/audio_processing_simulator.cc
+++ b/modules/audio_processing/test/audio_processing_simulator.cc
@@ -579,12 +579,6 @@
Config config;
AudioProcessing::Config apm_config;
std::unique_ptr<EchoControlFactory> echo_control_factory;
- if (settings_.use_bf && *settings_.use_bf) {
- config.Set<Beamforming>(new Beamforming(
- true, ParseArrayGeometry(*settings_.microphone_positions),
- SphericalPointf(DegreesToRadians(settings_.target_angle_degrees), 0.f,
- 1.f)));
- }
if (settings_.use_ts) {
config.Set<ExperimentalNs>(new ExperimentalNs(*settings_.use_ts));
}
diff --git a/modules/audio_processing/test/audio_processing_simulator.h b/modules/audio_processing/test/audio_processing_simulator.h
index 996df71..a98f8fc 100644
--- a/modules/audio_processing/test/audio_processing_simulator.h
+++ b/modules/audio_processing/test/audio_processing_simulator.h
@@ -41,8 +41,6 @@
rtc::Optional<int> output_num_channels;
rtc::Optional<int> reverse_output_sample_rate_hz;
rtc::Optional<int> reverse_output_num_channels;
- rtc::Optional<std::string> microphone_positions;
- float target_angle_degrees = 90.f;
rtc::Optional<std::string> output_filename;
rtc::Optional<std::string> reverse_output_filename;
rtc::Optional<std::string> input_filename;
diff --git a/modules/audio_processing/test/audioproc_float_impl.cc b/modules/audio_processing/test/audioproc_float_impl.cc
index 57fcdfb..bfaa136 100644
--- a/modules/audio_processing/test/audioproc_float_impl.cc
+++ b/modules/audio_processing/test/audioproc_float_impl.cc
@@ -56,15 +56,6 @@
DEFINE_int(reverse_output_sample_rate_hz,
kParameterNotSpecifiedValue,
"Reverse stream output sample rate in Hz");
-DEFINE_string(mic_positions,
- "",
- "Space delimited cartesian coordinates of microphones in "
- "meters. The coordinates of each point are contiguous. For a "
- "two element array: \"x1 y1 z1 x2 y2 z2\"");
-DEFINE_float(target_angle_degrees,
- 90.f,
- "The azimuth of the target in degrees (0-360). Only applies to "
- "beamforming.");
DEFINE_bool(fixed_interface,
false,
"Use the fixed interface when operating on wav files");
@@ -96,9 +87,6 @@
DEFINE_int(ts,
kParameterNotSpecifiedValue,
"Activate (1) or deactivate(0) the transient suppressor");
-DEFINE_int(bf,
- kParameterNotSpecifiedValue,
- "Activate (1) or deactivate(0) the beamformer");
DEFINE_int(ie,
kParameterNotSpecifiedValue,
"Activate (1) or deactivate(0) the intelligibility enhancer");
@@ -222,7 +210,6 @@
settings.use_le = true;
settings.use_vad = true;
settings.use_ie = false;
- settings.use_bf = false;
settings.use_ts = true;
settings.use_ns = true;
settings.use_hpf = true;
@@ -249,8 +236,6 @@
&settings.output_sample_rate_hz);
SetSettingIfSpecified(FLAG_reverse_output_sample_rate_hz,
&settings.reverse_output_sample_rate_hz);
- SetSettingIfSpecified(FLAG_mic_positions, &settings.microphone_positions);
- settings.target_angle_degrees = FLAG_target_angle_degrees;
SetSettingIfFlagSet(FLAG_aec, &settings.use_aec);
SetSettingIfFlagSet(FLAG_aecm, &settings.use_aecm);
SetSettingIfFlagSet(FLAG_ed, &settings.use_ed);
@@ -261,7 +246,6 @@
SetSettingIfFlagSet(FLAG_hpf, &settings.use_hpf);
SetSettingIfFlagSet(FLAG_ns, &settings.use_ns);
SetSettingIfFlagSet(FLAG_ts, &settings.use_ts);
- SetSettingIfFlagSet(FLAG_bf, &settings.use_bf);
SetSettingIfFlagSet(FLAG_ie, &settings.use_ie);
SetSettingIfFlagSet(FLAG_vad, &settings.use_vad);
SetSettingIfFlagSet(FLAG_le, &settings.use_le);
@@ -365,16 +349,6 @@
"Error: --reverse_output_num_channels must be positive!\n");
ReportConditionalErrorAndExit(
- settings.use_bf && *settings.use_bf && !settings.microphone_positions,
- "Error: --mic_positions must be specified when the beamformer is "
- "activated.\n");
-
- ReportConditionalErrorAndExit(
- settings.target_angle_degrees < 0.f ||
- settings.target_angle_degrees >= 360.f,
- "Error: -target_angle_degrees must be specified between 0 and 360.\n");
-
- ReportConditionalErrorAndExit(
settings.aec_suppression_level &&
((*settings.aec_suppression_level) < 0 ||
(*settings.aec_suppression_level) > 2),
diff --git a/modules/audio_processing/test/test_utils.cc b/modules/audio_processing/test/test_utils.cc
index 42ba7eb..846ce2b 100644
--- a/modules/audio_processing/test/test_utils.cc
+++ b/modules/audio_processing/test/test_utils.cc
@@ -132,27 +132,4 @@
}
}
-std::vector<Point> ParseArrayGeometry(const std::string& mic_positions) {
- const std::vector<float> values = ParseList<float>(mic_positions);
- const size_t num_mics =
- rtc::CheckedDivExact(values.size(), static_cast<size_t>(3));
- RTC_CHECK_GT(num_mics, 0) << "mic_positions is not large enough.";
-
- std::vector<Point> result;
- result.reserve(num_mics);
- for (size_t i = 0; i < values.size(); i += 3) {
- result.push_back(Point(values[i + 0], values[i + 1], values[i + 2]));
- }
-
- return result;
-}
-
-std::vector<Point> ParseArrayGeometry(const std::string& mic_positions,
- size_t num_mics) {
- std::vector<Point> result = ParseArrayGeometry(mic_positions);
- RTC_CHECK_EQ(result.size(), num_mics)
- << "Could not parse mic_positions or incorrect number of points.";
- return result;
-}
-
} // namespace webrtc
diff --git a/modules/audio_processing/test/test_utils.h b/modules/audio_processing/test/test_utils.h
index 81684f2..43f907a 100644
--- a/modules/audio_processing/test/test_utils.h
+++ b/modules/audio_processing/test/test_utils.h
@@ -143,16 +143,6 @@
return values;
}
-// Parses the array geometry from the command line.
-//
-// If a vector with size != num_mics is returned, an error has occurred and an
-// appropriate error message has been printed to stdout.
-std::vector<Point> ParseArrayGeometry(const std::string& mic_positions,
- size_t num_mics);
-
-// Same as above, but without the num_mics check for when it isn't available.
-std::vector<Point> ParseArrayGeometry(const std::string& mic_positions);
-
} // namespace webrtc
#endif // MODULES_AUDIO_PROCESSING_TEST_TEST_UTILS_H_
