/*
 *  Copyright (c) 2017 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include "media/engine/apm_helpers.h"

#include "modules/audio_device/include/audio_device.h"
#include "modules/audio_processing/include/audio_processing.h"
#include "rtc_base/logging.h"
#include "voice_engine/transmit_mixer.h"

namespace webrtc {
namespace apm_helpers {

AgcConfig GetAgcConfig(AudioProcessing* apm) {
  RTC_DCHECK(apm);
  AgcConfig result;
  result.targetLeveldBOv = apm->gain_control()->target_level_dbfs();
  result.digitalCompressionGaindB = apm->gain_control()->compression_gain_db();
  result.limiterEnable = apm->gain_control()->is_limiter_enabled();
  return result;
}

void SetAgcConfig(AudioProcessing* apm,
                  const AgcConfig& config) {
  RTC_DCHECK(apm);
  GainControl* gc = apm->gain_control();
  if (gc->set_target_level_dbfs(config.targetLeveldBOv) != 0) {
    LOG(LS_ERROR) << "Failed to set target level: " << config.targetLeveldBOv;
  }
  if (gc->set_compression_gain_db(config.digitalCompressionGaindB) != 0) {
    LOG(LS_ERROR) << "Failed to set compression gain: "
                  << config.digitalCompressionGaindB;
  }
  if (gc->enable_limiter(config.limiterEnable) != 0) {
    LOG(LS_ERROR) << "Failed to set limiter on/off: " << config.limiterEnable;
  }
}

void SetAgcStatus(AudioProcessing* apm,
                  AudioDeviceModule* adm,
                  bool enable) {
  RTC_DCHECK(apm);
  RTC_DCHECK(adm);
#if defined(WEBRTC_IOS) || defined(WEBRTC_ANDROID)
  GainControl::Mode agc_mode = GainControl::kFixedDigital;
#else
  GainControl::Mode agc_mode = GainControl::kAdaptiveAnalog;
#endif
  GainControl* gc = apm->gain_control();
  if (gc->set_mode(agc_mode) != 0) {
    LOG(LS_ERROR) << "Failed to set AGC mode: " << agc_mode;
    return;
  }
  if (gc->Enable(enable) != 0) {
    LOG(LS_ERROR) << "Failed to enable/disable AGC: " << enable;
    return;
  }
  // Set AGC state in the ADM when adaptive AGC mode has been selected.
  if (adm->SetAGC(enable && agc_mode == GainControl::kAdaptiveAnalog) != 0) {
    LOG(LS_ERROR) << "Failed to set AGC mode in ADM: " << enable;
    return;
  }
  LOG(LS_INFO) << "AGC set to " << enable << " with mode " << agc_mode;
}

void SetEcStatus(AudioProcessing* apm,
                 bool enable,
                 EcModes mode) {
  RTC_DCHECK(apm);
  RTC_DCHECK(mode == kEcConference || mode == kEcAecm) << "mode: " << mode;
  EchoCancellation* ec = apm->echo_cancellation();
  EchoControlMobile* ecm = apm->echo_control_mobile();
  if (mode == kEcConference) {
    // Disable the AECM before enabling the AEC.
    if (enable && ecm->is_enabled() && ecm->Enable(false) != 0) {
      LOG(LS_ERROR) << "Failed to disable AECM.";
      return;
    }
    if (ec->Enable(enable) != 0) {
      LOG(LS_ERROR) << "Failed to enable/disable AEC: " << enable;
      return;
    }
    if (ec->set_suppression_level(EchoCancellation::kHighSuppression)
        != 0) {
      LOG(LS_ERROR) << "Failed to set high AEC aggressiveness.";
      return;
    }
  } else {
    // Disable the AEC before enabling the AECM.
    if (enable && ec->is_enabled() && ec->Enable(false) != 0) {
      LOG(LS_ERROR) << "Failed to disable AEC.";
      return;
    }
    if (ecm->Enable(enable) != 0) {
      LOG(LS_ERROR) << "Failed to enable/disable AECM: " << enable;
      return;
    }
  }
  LOG(LS_INFO) << "Echo control set to " << enable << " with mode " << mode;
}

void SetEcMetricsStatus(AudioProcessing* apm, bool enable) {
  RTC_DCHECK(apm);
  if ((apm->echo_cancellation()->enable_metrics(enable) != 0) ||
      (apm->echo_cancellation()->enable_delay_logging(enable) != 0)) {
    LOG(LS_ERROR) << "Failed to enable/disable EC metrics: " << enable;
    return;
  }
  LOG(LS_INFO) << "EC metrics set to " << enable;
}

void SetAecmMode(AudioProcessing* apm, bool enable) {
  RTC_DCHECK(apm);
  EchoControlMobile* ecm = apm->echo_control_mobile();
  RTC_DCHECK_EQ(EchoControlMobile::kSpeakerphone, ecm->routing_mode());
  if (ecm->enable_comfort_noise(enable) != 0) {
    LOG(LS_ERROR) << "Failed to enable/disable CNG: " << enable;
    return;
  }
  LOG(LS_INFO) << "CNG set to " << enable;
}

void SetNsStatus(AudioProcessing* apm, bool enable) {
  RTC_DCHECK(apm);
  NoiseSuppression* ns = apm->noise_suppression();
  if (ns->set_level(NoiseSuppression::kHigh) != 0) {
    LOG(LS_ERROR) << "Failed to set high NS level.";
    return;
  }
  if (ns->Enable(enable) != 0) {
    LOG(LS_ERROR) << "Failed to enable/disable NS: " << enable;
    return;
  }
  LOG(LS_INFO) << "NS set to " << enable;
}

void SetTypingDetectionStatus(AudioProcessing* apm, bool enable) {
  RTC_DCHECK(apm);
#if WEBRTC_VOICE_ENGINE_TYPING_DETECTION
  // Typing detection takes place in TransmitMixer::PrepareDemux() and
  // TransmitMixer::TypingDetection(). The typing detection algorithm takes as
  // input two booleans:
  //   1. A signal whether a key was pressed during the audio frame.
  //   2. Whether VAD is active or not.
  // TransmitMixer will not even call the detector if APM has set kVadUnknown in
  // the audio frame after near end processing, so enabling/disabling VAD is
  // sufficient for turning typing detection on/off.
  // TODO(solenberg): Rather than relying on a side effect, consider forcing the
  //                  feature on/off in TransmitMixer.
  VoiceDetection* vd = apm->voice_detection();
  if (vd->Enable(enable)) {
    LOG(LS_ERROR) << "Failed to enable/disable VAD: " << enable;
    return;
  }
  if (vd->set_likelihood(VoiceDetection::kVeryLowLikelihood)) {
    LOG(LS_ERROR) << "Failed to set low VAD likelihood.";
    return;
  }
  LOG(LS_INFO) << "VAD set to " << enable << " for typing detection.";
#endif
}
}  // namespace apm_helpers
}  // namespace webrtc