webrtc/modules/audio_coding/neteq/payload_splitter.cc - src - Git at Google

 /*
  *  Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
  *
  *  Use of this source code is governed by a BSD-style license
  *  that can be found in the LICENSE file in the root of the source
  *  tree. An additional intellectual property rights grant can be found
  *  in the file PATENTS.  All contributing project authors may
  *  be found in the AUTHORS file in the root of the source tree.
  */

 #include "webrtc/modules/audio_coding/neteq/payload_splitter.h"

 #include <assert.h>

 #include "webrtc/base/checks.h"
 #include "webrtc/base/logging.h"
 #include "webrtc/modules/audio_coding/neteq/decoder_database.h"

 namespace webrtc {

 // The method loops through a list of packets {A, B, C, ...}. Each packet is
 // split into its corresponding RED payloads, {A1, A2, ...}, which is
 // temporarily held in the list |new_packets|.
 // When the first packet in |packet_list| has been processed, the orignal packet
 // is replaced by the new ones in |new_packets|, so that |packet_list| becomes:
 // {A1, A2, ..., B, C, ...}. The method then continues with B, and C, until all
 // the original packets have been replaced by their split payloads.
 int PayloadSplitter::SplitRed(PacketList* packet_list) {
   int ret = kOK;
   PacketList::iterator it = packet_list->begin();
   while (it != packet_list->end()) {
     const Packet* red_packet = (*it);
     assert(!red_packet->payload.empty());
     const uint8_t* payload_ptr = red_packet->payload.data();

     // Read RED headers (according to RFC 2198):
     //
     //    0                   1                   2                   3
     //    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     //   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     //   |F|   block PT  |  timestamp offset         |   block length    |
     //   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     // Last RED header:
     //    0 1 2 3 4 5 6 7
     //   +-+-+-+-+-+-+-+-+
     //   |0|   Block PT  |
     //   +-+-+-+-+-+-+-+-+

     struct RedHeader {
       uint8_t payload_type;
       uint32_t timestamp;
       size_t payload_length;
       bool primary;
     };

     std::vector<RedHeader> new_headers;
     bool last_block = false;
     size_t sum_length = 0;
     while (!last_block) {
       RedHeader new_header;
       // Check the F bit. If F == 0, this was the last block.
       last_block = ((*payload_ptr & 0x80) == 0);
       // Bits 1 through 7 are payload type.
       new_header.payload_type = payload_ptr[0] & 0x7F;
       if (last_block) {
         // No more header data to read.
         ++sum_length;  // Account for RED header size of 1 byte.
         new_header.timestamp = red_packet->header.timestamp;
         new_header.payload_length = red_packet->payload.size() - sum_length;
         new_header.primary = true;  // Last block is always primary.
         payload_ptr += 1;  // Advance to first payload byte.
       } else {
         // Bits 8 through 21 are timestamp offset.
         int timestamp_offset = (payload_ptr[1] << 6) +
             ((payload_ptr[2] & 0xFC) >> 2);
         new_header.timestamp = red_packet->header.timestamp - timestamp_offset;
         // Bits 22 through 31 are payload length.
         new_header.payload_length =
             ((payload_ptr[2] & 0x03) << 8) + payload_ptr[3];
         new_header.primary = false;
         payload_ptr += 4;  // Advance to next RED header.
       }
       sum_length += new_header.payload_length;
       sum_length += 4;  // Account for RED header size of 4 bytes.
       // Store in new list of packets.
       new_headers.push_back(new_header);
     }

     // Populate the new packets with payload data.
     // |payload_ptr| now points at the first payload byte.
     PacketList new_packets;  // An empty list to store the split packets in.
     for (const auto& new_header : new_headers) {
       size_t payload_length = new_header.payload_length;
       if (payload_ptr + payload_length >
           red_packet->payload.data() + red_packet->payload.size()) {
         // The block lengths in the RED headers do not match the overall packet
         // length. Something is corrupt. Discard this and the remaining
         // payloads from this packet.
         LOG(LS_WARNING) << "SplitRed length mismatch";
         ret = kRedLengthMismatch;
         break;
       }
       Packet* new_packet = new Packet;
       new_packet->header = red_packet->header;
       new_packet->header.timestamp = new_header.timestamp;
       new_packet->header.payloadType = new_header.payload_type;
       new_packet->primary = new_header.primary;
       new_packet->payload.SetData(payload_ptr, payload_length);
       new_packets.push_front(new_packet);
       payload_ptr += payload_length;
     }
     // Insert new packets into original list, before the element pointed to by
     // iterator |it|.
     packet_list->splice(it, new_packets, new_packets.begin(),
                         new_packets.end());
     // Delete old packet payload.
     delete (*it);
     // Remove |it| from the packet list. This operation effectively moves the
     // iterator |it| to the next packet in the list. Thus, we do not have to
     // increment it manually.
     it = packet_list->erase(it);
   }
   return ret;
 }

 int PayloadSplitter::SplitFec(PacketList* packet_list,
                               DecoderDatabase* decoder_database) {
   PacketList::iterator it = packet_list->begin();
   // Iterate through all packets in |packet_list|.
   while (it != packet_list->end()) {
     Packet* packet = (*it);  // Just to make the notation more intuitive.
     // Get codec type for this payload.
     uint8_t payload_type = packet->header.payloadType;
     const DecoderDatabase::DecoderInfo* info =
         decoder_database->GetDecoderInfo(payload_type);
     if (!info) {
       LOG(LS_WARNING) << "SplitFec unknown payload type";
       return kUnknownPayloadType;
     }

     // Not an FEC packet.
     AudioDecoder* decoder = decoder_database->GetDecoder(payload_type);
     // decoder should not return NULL, except for comfort noise payloads which
     // are handled separately.
     assert(decoder != NULL || decoder_database->IsComfortNoise(payload_type));
     if (!decoder ||
         !decoder->PacketHasFec(packet->payload.data(),
                                packet->payload.size())) {
       ++it;
       continue;
     }

     switch (info->codec_type) {
       case NetEqDecoder::kDecoderOpus:
       case NetEqDecoder::kDecoderOpus_2ch: {
         // The main payload of this packet should be decoded as a primary
         // payload, even if it comes as a secondary payload in a RED packet.
         packet->primary = true;

         Packet* new_packet = new Packet;
         new_packet->header = packet->header;
         int duration = decoder->PacketDurationRedundant(packet->payload.data(),
                                                         packet->payload.size());
         new_packet->header.timestamp -= duration;
         new_packet->payload.SetData(packet->payload);
         new_packet->primary = false;
         // Waiting time should not be set here.
         RTC_DCHECK(!packet->waiting_time);

         packet_list->insert(it, new_packet);
         break;
       }
       default: {
         LOG(LS_WARNING) << "SplitFec wrong payload type";
         return kFecSplitError;
       }
     }

     ++it;
   }
   return kOK;
 }

 int PayloadSplitter::CheckRedPayloads(PacketList* packet_list,
                                       const DecoderDatabase& decoder_database) {
   PacketList::iterator it = packet_list->begin();
   int main_payload_type = -1;
   int num_deleted_packets = 0;
   while (it != packet_list->end()) {
     uint8_t this_payload_type = (*it)->header.payloadType;
     if (!decoder_database.IsDtmf(this_payload_type) &&
         !decoder_database.IsComfortNoise(this_payload_type)) {
       if (main_payload_type == -1) {
         // This is the first packet in the list which is non-DTMF non-CNG.
         main_payload_type = this_payload_type;
       } else {
         if (this_payload_type != main_payload_type) {
           // We do not allow redundant payloads of a different type.
           // Discard this payload.
           delete (*it);
           // Remove |it| from the packet list. This operation effectively
           // moves the iterator |it| to the next packet in the list. Thus, we
           // do not have to increment it manually.
           it = packet_list->erase(it);
           ++num_deleted_packets;
           continue;
         }
       }
     }
     ++it;
   }
   return num_deleted_packets;
 }

 int PayloadSplitter::SplitAudio(PacketList* packet_list,
                                 const DecoderDatabase& decoder_database) {
   PacketList::iterator it = packet_list->begin();
   // Iterate through all packets in |packet_list|.
   while (it != packet_list->end()) {
     Packet* packet = (*it);  // Just to make the notation more intuitive.
     // Get codec type for this payload.
     const DecoderDatabase::DecoderInfo* info =
         decoder_database.GetDecoderInfo(packet->header.payloadType);
     if (!info) {
       LOG(LS_WARNING) << "SplitAudio unknown payload type";
       return kUnknownPayloadType;
     }
     PacketList new_packets;
     switch (info->codec_type) {
       case NetEqDecoder::kDecoderPCMu:
       case NetEqDecoder::kDecoderPCMa: {
         // 8 bytes per ms; 8 timestamps per ms.
         SplitBySamples(packet, 8, 8, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCMu_2ch:
       case NetEqDecoder::kDecoderPCMa_2ch: {
         // 2 * 8 bytes per ms; 8 timestamps per ms.
         SplitBySamples(packet, 2 * 8, 8, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderG722: {
         // 8 bytes per ms; 16 timestamps per ms.
         SplitBySamples(packet, 8, 16, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16B: {
         // 16 bytes per ms; 8 timestamps per ms.
         SplitBySamples(packet, 16, 8, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bwb: {
         // 32 bytes per ms; 16 timestamps per ms.
         SplitBySamples(packet, 32, 16, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bswb32kHz: {
         // 64 bytes per ms; 32 timestamps per ms.
         SplitBySamples(packet, 64, 32, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bswb48kHz: {
         // 96 bytes per ms; 48 timestamps per ms.
         SplitBySamples(packet, 96, 48, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16B_2ch: {
         // 2 * 16 bytes per ms; 8 timestamps per ms.
         SplitBySamples(packet, 2 * 16, 8, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bwb_2ch: {
         // 2 * 32 bytes per ms; 16 timestamps per ms.
         SplitBySamples(packet, 2 * 32, 16, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bswb32kHz_2ch: {
         // 2 * 64 bytes per ms; 32 timestamps per ms.
         SplitBySamples(packet, 2 * 64, 32, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16Bswb48kHz_2ch: {
         // 2 * 96 bytes per ms; 48 timestamps per ms.
         SplitBySamples(packet, 2 * 96, 48, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderPCM16B_5ch: {
         // 5 * 16 bytes per ms; 8 timestamps per ms.
         SplitBySamples(packet, 5 * 16, 8, &new_packets);
         break;
       }
       case NetEqDecoder::kDecoderILBC: {
         size_t bytes_per_frame;
         int timestamps_per_frame;
         if (packet->payload.size() >= 950) {
           LOG(LS_WARNING) << "SplitAudio too large iLBC payload";
           return kTooLargePayload;
         }
         if (packet->payload.size() % 38 == 0) {
           // 20 ms frames.
           bytes_per_frame = 38;
           timestamps_per_frame = 160;
         } else if (packet->payload.size() % 50 == 0) {
           // 30 ms frames.
           bytes_per_frame = 50;
           timestamps_per_frame = 240;
         } else {
           LOG(LS_WARNING) << "SplitAudio invalid iLBC payload";
           return kFrameSplitError;
         }
         int ret = SplitByFrames(packet, bytes_per_frame, timestamps_per_frame,
                                 &new_packets);
         if (ret < 0) {
           return ret;
         } else if (ret == kNoSplit) {
           // Do not split at all. Simply advance to the next packet in the list.
           ++it;
           // We do not have any new packets to insert, and should not delete the
           // old one. Skip the code after the switch case, and jump straight to
           // the next packet in the while loop.
           continue;
         }
         break;
       }
       default: {
         // Do not split at all. Simply advance to the next packet in the list.
         ++it;
         // We do not have any new packets to insert, and should not delete the
         // old one. Skip the code after the switch case, and jump straight to
         // the next packet in the while loop.
         continue;
       }
     }
     // Insert new packets into original list, before the element pointed to by
     // iterator |it|.
     packet_list->splice(it, new_packets, new_packets.begin(),
                         new_packets.end());
     // Delete old packet payload.
     delete (*it);
     // Remove |it| from the packet list. This operation effectively moves the
     // iterator |it| to the next packet in the list. Thus, we do not have to
     // increment it manually.
     it = packet_list->erase(it);
   }
   return kOK;
 }

 void PayloadSplitter::SplitBySamples(const Packet* packet,
                                      size_t bytes_per_ms,
                                      uint32_t timestamps_per_ms,
                                      PacketList* new_packets) {
   assert(packet);
   assert(new_packets);

   size_t split_size_bytes = packet->payload.size();

   // Find a "chunk size" >= 20 ms and < 40 ms.
   size_t min_chunk_size = bytes_per_ms * 20;
   // Reduce the split size by half as long as |split_size_bytes| is at least
   // twice the minimum chunk size (so that the resulting size is at least as
   // large as the minimum chunk size).
   while (split_size_bytes >= 2 * min_chunk_size) {
     split_size_bytes >>= 1;
   }
   uint32_t timestamps_per_chunk = static_cast<uint32_t>(
       split_size_bytes * timestamps_per_ms / bytes_per_ms);
   uint32_t timestamp = packet->header.timestamp;

   const uint8_t* payload_ptr = packet->payload.data();
   size_t len = packet->payload.size();
   while (len >= (2 * split_size_bytes)) {
     Packet* new_packet = new Packet;
     new_packet->header = packet->header;
     new_packet->header.timestamp = timestamp;
     timestamp += timestamps_per_chunk;
     new_packet->primary = packet->primary;
     new_packet->payload.SetData(payload_ptr, split_size_bytes);
     payload_ptr += split_size_bytes;
     new_packets->push_back(new_packet);
     len -= split_size_bytes;
   }

   if (len > 0) {
     Packet* new_packet = new Packet;
     new_packet->header = packet->header;
     new_packet->header.timestamp = timestamp;
     new_packet->primary = packet->primary;
     new_packet->payload.SetData(payload_ptr, len);
     new_packets->push_back(new_packet);
   }
 }

 int PayloadSplitter::SplitByFrames(const Packet* packet,
                                    size_t bytes_per_frame,
                                    uint32_t timestamps_per_frame,
                                    PacketList* new_packets) {
   if (packet->payload.size() % bytes_per_frame != 0) {
     LOG(LS_WARNING) << "SplitByFrames length mismatch";
     return kFrameSplitError;
   }

   if (packet->payload.size() == bytes_per_frame) {
     // Special case. Do not split the payload.
     return kNoSplit;
   }

   uint32_t timestamp = packet->header.timestamp;
   const uint8_t* payload_ptr = packet->payload.data();
   size_t len = packet->payload.size();
   while (len > 0) {
     assert(len >= bytes_per_frame);
     Packet* new_packet = new Packet;
     new_packet->header = packet->header;
     new_packet->header.timestamp = timestamp;
     timestamp += timestamps_per_frame;
     new_packet->primary = packet->primary;
     new_packet->payload.SetData(payload_ptr, bytes_per_frame);
     payload_ptr += bytes_per_frame;
     new_packets->push_back(new_packet);
     len -= bytes_per_frame;
   }
   return kOK;
 }

 }  // namespace webrtc
	/*
	* Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
	*
	* Use of this source code is governed by a BSD-style license
	* that can be found in the LICENSE file in the root of the source
	* tree. An additional intellectual property rights grant can be found
	* in the file PATENTS. All contributing project authors may
	* be found in the AUTHORS file in the root of the source tree.
	*/

	#include "webrtc/modules/audio_coding/neteq/payload_splitter.h"

	#include <assert.h>

	#include "webrtc/base/checks.h"
	#include "webrtc/base/logging.h"
	#include "webrtc/modules/audio_coding/neteq/decoder_database.h"

	namespace webrtc {

	// The method loops through a list of packets {A, B, C, ...}. Each packet is
	// split into its corresponding RED payloads, {A1, A2, ...}, which is
	// temporarily held in the list \|new_packets\|.
	// When the first packet in \|packet_list\| has been processed, the orignal packet
	// is replaced by the new ones in \|new_packets\|, so that \|packet_list\| becomes:
	// {A1, A2, ..., B, C, ...}. The method then continues with B, and C, until all
	// the original packets have been replaced by their split payloads.
	int PayloadSplitter::SplitRed(PacketList* packet_list) {
	int ret = kOK;
	PacketList::iterator it = packet_list->begin();
	while (it != packet_list->end()) {
	const Packet* red_packet = (*it);
	assert(!red_packet->payload.empty());
	const uint8_t* payload_ptr = red_packet->payload.data();

	// Read RED headers (according to RFC 2198):
	//
	// 0 1 2 3
	// 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
	// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
	// \|F\| block PT \| timestamp offset \| block length \|
	// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
	// Last RED header:
	// 0 1 2 3 4 5 6 7
	// +-+-+-+-+-+-+-+-+
	// \|0\| Block PT \|
	// +-+-+-+-+-+-+-+-+

	struct RedHeader {
	uint8_t payload_type;
	uint32_t timestamp;
	size_t payload_length;
	bool primary;
	};

	std::vector<RedHeader> new_headers;
	bool last_block = false;
	size_t sum_length = 0;
	while (!last_block) {
	RedHeader new_header;
	// Check the F bit. If F == 0, this was the last block.
	last_block = ((*payload_ptr & 0x80) == 0);
	// Bits 1 through 7 are payload type.
	new_header.payload_type = payload_ptr[0] & 0x7F;
	if (last_block) {
	// No more header data to read.
	++sum_length; // Account for RED header size of 1 byte.
	new_header.timestamp = red_packet->header.timestamp;
	new_header.payload_length = red_packet->payload.size() - sum_length;
	new_header.primary = true; // Last block is always primary.
	payload_ptr += 1; // Advance to first payload byte.
	} else {
	// Bits 8 through 21 are timestamp offset.
	int timestamp_offset = (payload_ptr[1] << 6) +
	((payload_ptr[2] & 0xFC) >> 2);
	new_header.timestamp = red_packet->header.timestamp - timestamp_offset;
	// Bits 22 through 31 are payload length.
	new_header.payload_length =
	((payload_ptr[2] & 0x03) << 8) + payload_ptr[3];
	new_header.primary = false;
	payload_ptr += 4; // Advance to next RED header.
	}
	sum_length += new_header.payload_length;
	sum_length += 4; // Account for RED header size of 4 bytes.
	// Store in new list of packets.
	new_headers.push_back(new_header);
	}

	// Populate the new packets with payload data.
	// \|payload_ptr\| now points at the first payload byte.
	PacketList new_packets; // An empty list to store the split packets in.
	for (const auto& new_header : new_headers) {
	size_t payload_length = new_header.payload_length;
	if (payload_ptr + payload_length >
	red_packet->payload.data() + red_packet->payload.size()) {
	// The block lengths in the RED headers do not match the overall packet
	// length. Something is corrupt. Discard this and the remaining
	// payloads from this packet.
	LOG(LS_WARNING) << "SplitRed length mismatch";
	ret = kRedLengthMismatch;
	break;
	}
	Packet* new_packet = new Packet;
	new_packet->header = red_packet->header;
	new_packet->header.timestamp = new_header.timestamp;
	new_packet->header.payloadType = new_header.payload_type;
	new_packet->primary = new_header.primary;
	new_packet->payload.SetData(payload_ptr, payload_length);
	new_packets.push_front(new_packet);
	payload_ptr += payload_length;
	}
	// Insert new packets into original list, before the element pointed to by
	// iterator \|it\|.
	packet_list->splice(it, new_packets, new_packets.begin(),
	new_packets.end());
	// Delete old packet payload.
	delete (*it);
	// Remove \|it\| from the packet list. This operation effectively moves the
	// iterator \|it\| to the next packet in the list. Thus, we do not have to
	// increment it manually.
	it = packet_list->erase(it);
	}
	return ret;
	}

	int PayloadSplitter::SplitFec(PacketList* packet_list,
	DecoderDatabase* decoder_database) {
	PacketList::iterator it = packet_list->begin();
	// Iterate through all packets in \|packet_list\|.
	while (it != packet_list->end()) {
	Packet* packet = (*it); // Just to make the notation more intuitive.
	// Get codec type for this payload.
	uint8_t payload_type = packet->header.payloadType;
	const DecoderDatabase::DecoderInfo* info =
	decoder_database->GetDecoderInfo(payload_type);
	if (!info) {
	LOG(LS_WARNING) << "SplitFec unknown payload type";
	return kUnknownPayloadType;
	}

	// Not an FEC packet.
	AudioDecoder* decoder = decoder_database->GetDecoder(payload_type);
	// decoder should not return NULL, except for comfort noise payloads which
	// are handled separately.
	assert(decoder != NULL \|\| decoder_database->IsComfortNoise(payload_type));
	if (!decoder \|\|
	!decoder->PacketHasFec(packet->payload.data(),
	packet->payload.size())) {
	++it;
	continue;
	}

	switch (info->codec_type) {
	case NetEqDecoder::kDecoderOpus:
	case NetEqDecoder::kDecoderOpus_2ch: {
	// The main payload of this packet should be decoded as a primary
	// payload, even if it comes as a secondary payload in a RED packet.
	packet->primary = true;

	Packet* new_packet = new Packet;
	new_packet->header = packet->header;
	int duration = decoder->PacketDurationRedundant(packet->payload.data(),
	packet->payload.size());
	new_packet->header.timestamp -= duration;
	new_packet->payload.SetData(packet->payload);
	new_packet->primary = false;
	// Waiting time should not be set here.
	RTC_DCHECK(!packet->waiting_time);

	packet_list->insert(it, new_packet);
	break;
	}
	default: {
	LOG(LS_WARNING) << "SplitFec wrong payload type";
	return kFecSplitError;
	}
	}

	++it;
	}
	return kOK;
	}

	int PayloadSplitter::CheckRedPayloads(PacketList* packet_list,
	const DecoderDatabase& decoder_database) {
	PacketList::iterator it = packet_list->begin();
	int main_payload_type = -1;
	int num_deleted_packets = 0;
	while (it != packet_list->end()) {
	uint8_t this_payload_type = (*it)->header.payloadType;
	if (!decoder_database.IsDtmf(this_payload_type) &&
	!decoder_database.IsComfortNoise(this_payload_type)) {
	if (main_payload_type == -1) {
	// This is the first packet in the list which is non-DTMF non-CNG.
	main_payload_type = this_payload_type;
	} else {
	if (this_payload_type != main_payload_type) {
	// We do not allow redundant payloads of a different type.
	// Discard this payload.
	delete (*it);
	// Remove \|it\| from the packet list. This operation effectively
	// moves the iterator \|it\| to the next packet in the list. Thus, we
	// do not have to increment it manually.
	it = packet_list->erase(it);
	++num_deleted_packets;
	continue;
	}
	}
	}
	++it;
	}
	return num_deleted_packets;
	}

	int PayloadSplitter::SplitAudio(PacketList* packet_list,
	const DecoderDatabase& decoder_database) {
	PacketList::iterator it = packet_list->begin();
	// Iterate through all packets in \|packet_list\|.
	while (it != packet_list->end()) {
	Packet* packet = (*it); // Just to make the notation more intuitive.
	// Get codec type for this payload.
	const DecoderDatabase::DecoderInfo* info =
	decoder_database.GetDecoderInfo(packet->header.payloadType);
	if (!info) {
	LOG(LS_WARNING) << "SplitAudio unknown payload type";
	return kUnknownPayloadType;
	}
	PacketList new_packets;
	switch (info->codec_type) {
	case NetEqDecoder::kDecoderPCMu:
	case NetEqDecoder::kDecoderPCMa: {
	// 8 bytes per ms; 8 timestamps per ms.
	SplitBySamples(packet, 8, 8, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCMu_2ch:
	case NetEqDecoder::kDecoderPCMa_2ch: {
	// 2 * 8 bytes per ms; 8 timestamps per ms.
	SplitBySamples(packet, 2 * 8, 8, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderG722: {
	// 8 bytes per ms; 16 timestamps per ms.
	SplitBySamples(packet, 8, 16, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16B: {
	// 16 bytes per ms; 8 timestamps per ms.
	SplitBySamples(packet, 16, 8, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bwb: {
	// 32 bytes per ms; 16 timestamps per ms.
	SplitBySamples(packet, 32, 16, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bswb32kHz: {
	// 64 bytes per ms; 32 timestamps per ms.
	SplitBySamples(packet, 64, 32, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bswb48kHz: {
	// 96 bytes per ms; 48 timestamps per ms.
	SplitBySamples(packet, 96, 48, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16B_2ch: {
	// 2 * 16 bytes per ms; 8 timestamps per ms.
	SplitBySamples(packet, 2 * 16, 8, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bwb_2ch: {
	// 2 * 32 bytes per ms; 16 timestamps per ms.
	SplitBySamples(packet, 2 * 32, 16, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bswb32kHz_2ch: {
	// 2 * 64 bytes per ms; 32 timestamps per ms.
	SplitBySamples(packet, 2 * 64, 32, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16Bswb48kHz_2ch: {
	// 2 * 96 bytes per ms; 48 timestamps per ms.
	SplitBySamples(packet, 2 * 96, 48, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderPCM16B_5ch: {
	// 5 * 16 bytes per ms; 8 timestamps per ms.
	SplitBySamples(packet, 5 * 16, 8, &new_packets);
	break;
	}
	case NetEqDecoder::kDecoderILBC: {
	size_t bytes_per_frame;
	int timestamps_per_frame;
	if (packet->payload.size() >= 950) {
	LOG(LS_WARNING) << "SplitAudio too large iLBC payload";
	return kTooLargePayload;
	}
	if (packet->payload.size() % 38 == 0) {
	// 20 ms frames.
	bytes_per_frame = 38;
	timestamps_per_frame = 160;
	} else if (packet->payload.size() % 50 == 0) {
	// 30 ms frames.
	bytes_per_frame = 50;
	timestamps_per_frame = 240;
	} else {
	LOG(LS_WARNING) << "SplitAudio invalid iLBC payload";
	return kFrameSplitError;
	}
	int ret = SplitByFrames(packet, bytes_per_frame, timestamps_per_frame,
	&new_packets);
	if (ret < 0) {
	return ret;
	} else if (ret == kNoSplit) {
	// Do not split at all. Simply advance to the next packet in the list.
	++it;
	// We do not have any new packets to insert, and should not delete the
	// old one. Skip the code after the switch case, and jump straight to
	// the next packet in the while loop.
	continue;
	}
	break;
	}
	default: {
	// Do not split at all. Simply advance to the next packet in the list.
	++it;
	// We do not have any new packets to insert, and should not delete the
	// old one. Skip the code after the switch case, and jump straight to
	// the next packet in the while loop.
	continue;
	}
	}
	// Insert new packets into original list, before the element pointed to by
	// iterator \|it\|.
	packet_list->splice(it, new_packets, new_packets.begin(),
	new_packets.end());
	// Delete old packet payload.
	delete (*it);
	// Remove \|it\| from the packet list. This operation effectively moves the
	// iterator \|it\| to the next packet in the list. Thus, we do not have to
	// increment it manually.
	it = packet_list->erase(it);
	}
	return kOK;
	}

	void PayloadSplitter::SplitBySamples(const Packet* packet,
	size_t bytes_per_ms,
	uint32_t timestamps_per_ms,
	PacketList* new_packets) {
	assert(packet);
	assert(new_packets);

	size_t split_size_bytes = packet->payload.size();

	// Find a "chunk size" >= 20 ms and < 40 ms.
	size_t min_chunk_size = bytes_per_ms * 20;
	// Reduce the split size by half as long as \|split_size_bytes\| is at least
	// twice the minimum chunk size (so that the resulting size is at least as
	// large as the minimum chunk size).
	while (split_size_bytes >= 2 * min_chunk_size) {
	split_size_bytes >>= 1;
	}
	uint32_t timestamps_per_chunk = static_cast<uint32_t>(
	split_size_bytes * timestamps_per_ms / bytes_per_ms);
	uint32_t timestamp = packet->header.timestamp;

	const uint8_t* payload_ptr = packet->payload.data();
	size_t len = packet->payload.size();
	while (len >= (2 * split_size_bytes)) {
	Packet* new_packet = new Packet;
	new_packet->header = packet->header;
	new_packet->header.timestamp = timestamp;
	timestamp += timestamps_per_chunk;
	new_packet->primary = packet->primary;
	new_packet->payload.SetData(payload_ptr, split_size_bytes);
	payload_ptr += split_size_bytes;
	new_packets->push_back(new_packet);
	len -= split_size_bytes;
	}

	if (len > 0) {
	Packet* new_packet = new Packet;
	new_packet->header = packet->header;
	new_packet->header.timestamp = timestamp;
	new_packet->primary = packet->primary;
	new_packet->payload.SetData(payload_ptr, len);
	new_packets->push_back(new_packet);
	}
	}

	int PayloadSplitter::SplitByFrames(const Packet* packet,
	size_t bytes_per_frame,
	uint32_t timestamps_per_frame,
	PacketList* new_packets) {
	if (packet->payload.size() % bytes_per_frame != 0) {
	LOG(LS_WARNING) << "SplitByFrames length mismatch";
	return kFrameSplitError;
	}

	if (packet->payload.size() == bytes_per_frame) {
	// Special case. Do not split the payload.
	return kNoSplit;
	}

	uint32_t timestamp = packet->header.timestamp;
	const uint8_t* payload_ptr = packet->payload.data();
	size_t len = packet->payload.size();
	while (len > 0) {
	assert(len >= bytes_per_frame);
	Packet* new_packet = new Packet;
	new_packet->header = packet->header;
	new_packet->header.timestamp = timestamp;
	timestamp += timestamps_per_frame;
	new_packet->primary = packet->primary;
	new_packet->payload.SetData(payload_ptr, bytes_per_frame);
	payload_ptr += bytes_per_frame;
	new_packets->push_back(new_packet);
	len -= bytes_per_frame;
	}
	return kOK;
	}

	} // namespace webrtc