blob: 784b47c457695ba8afb87dfb538e80ba70f888e9 [file] [log] [blame]
/*
* Copyright (c) 2017 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "webrtc/media/engine/apm_helpers.h"
#include "webrtc/modules/audio_device/include/audio_device.h"
#include "webrtc/modules/audio_processing/include/audio_processing.h"
#include "webrtc/rtc_base/logging.h"
#include "webrtc/voice_engine/transmit_mixer.h"
namespace webrtc {
namespace apm_helpers {
AgcConfig GetAgcConfig(AudioProcessing* apm) {
RTC_DCHECK(apm);
AgcConfig result;
result.targetLeveldBOv = apm->gain_control()->target_level_dbfs();
result.digitalCompressionGaindB = apm->gain_control()->compression_gain_db();
result.limiterEnable = apm->gain_control()->is_limiter_enabled();
return result;
}
void SetAgcConfig(AudioProcessing* apm,
const AgcConfig& config) {
RTC_DCHECK(apm);
GainControl* gc = apm->gain_control();
if (gc->set_target_level_dbfs(config.targetLeveldBOv) != 0) {
LOG(LS_ERROR) << "Failed to set target level: " << config.targetLeveldBOv;
}
if (gc->set_compression_gain_db(config.digitalCompressionGaindB) != 0) {
LOG(LS_ERROR) << "Failed to set compression gain: "
<< config.digitalCompressionGaindB;
}
if (gc->enable_limiter(config.limiterEnable) != 0) {
LOG(LS_ERROR) << "Failed to set limiter on/off: " << config.limiterEnable;
}
}
void SetAgcStatus(AudioProcessing* apm,
AudioDeviceModule* adm,
bool enable) {
RTC_DCHECK(apm);
RTC_DCHECK(adm);
#if defined(WEBRTC_IOS) || defined(WEBRTC_ANDROID)
GainControl::Mode agc_mode = GainControl::kFixedDigital;
#else
GainControl::Mode agc_mode = GainControl::kAdaptiveAnalog;
#endif
GainControl* gc = apm->gain_control();
if (gc->set_mode(agc_mode) != 0) {
LOG(LS_ERROR) << "Failed to set AGC mode: " << agc_mode;
return;
}
if (gc->Enable(enable) != 0) {
LOG(LS_ERROR) << "Failed to enable/disable AGC: " << enable;
return;
}
// Set AGC state in the ADM when adaptive AGC mode has been selected.
if (adm->SetAGC(enable && agc_mode == GainControl::kAdaptiveAnalog) != 0) {
LOG(LS_ERROR) << "Failed to set AGC mode in ADM: " << enable;
return;
}
LOG(LS_INFO) << "AGC set to " << enable << " with mode " << agc_mode;
}
void SetEcStatus(AudioProcessing* apm,
bool enable,
EcModes mode) {
RTC_DCHECK(apm);
RTC_DCHECK(mode == kEcConference || mode == kEcAecm) << "mode: " << mode;
EchoCancellation* ec = apm->echo_cancellation();
EchoControlMobile* ecm = apm->echo_control_mobile();
if (mode == kEcConference) {
// Disable the AECM before enabling the AEC.
if (enable && ecm->is_enabled() && ecm->Enable(false) != 0) {
LOG(LS_ERROR) << "Failed to disable AECM.";
return;
}
if (ec->Enable(enable) != 0) {
LOG(LS_ERROR) << "Failed to enable/disable AEC: " << enable;
return;
}
if (ec->set_suppression_level(EchoCancellation::kHighSuppression)
!= 0) {
LOG(LS_ERROR) << "Failed to set high AEC aggressiveness.";
return;
}
} else {
// Disable the AEC before enabling the AECM.
if (enable && ec->is_enabled() && ec->Enable(false) != 0) {
LOG(LS_ERROR) << "Failed to disable AEC.";
return;
}
if (ecm->Enable(enable) != 0) {
LOG(LS_ERROR) << "Failed to enable/disable AECM: " << enable;
return;
}
}
LOG(LS_INFO) << "Echo control set to " << enable << " with mode " << mode;
}
void SetEcMetricsStatus(AudioProcessing* apm, bool enable) {
RTC_DCHECK(apm);
if ((apm->echo_cancellation()->enable_metrics(enable) != 0) ||
(apm->echo_cancellation()->enable_delay_logging(enable) != 0)) {
LOG(LS_ERROR) << "Failed to enable/disable EC metrics: " << enable;
return;
}
LOG(LS_INFO) << "EC metrics set to " << enable;
}
void SetAecmMode(AudioProcessing* apm, bool enable) {
RTC_DCHECK(apm);
EchoControlMobile* ecm = apm->echo_control_mobile();
RTC_DCHECK_EQ(EchoControlMobile::kSpeakerphone, ecm->routing_mode());
if (ecm->enable_comfort_noise(enable) != 0) {
LOG(LS_ERROR) << "Failed to enable/disable CNG: " << enable;
return;
}
LOG(LS_INFO) << "CNG set to " << enable;
}
void SetNsStatus(AudioProcessing* apm, bool enable) {
RTC_DCHECK(apm);
NoiseSuppression* ns = apm->noise_suppression();
if (ns->set_level(NoiseSuppression::kHigh) != 0) {
LOG(LS_ERROR) << "Failed to set high NS level.";
return;
}
if (ns->Enable(enable) != 0) {
LOG(LS_ERROR) << "Failed to enable/disable NS: " << enable;
return;
}
LOG(LS_INFO) << "NS set to " << enable;
}
void SetTypingDetectionStatus(AudioProcessing* apm, bool enable) {
RTC_DCHECK(apm);
#if WEBRTC_VOICE_ENGINE_TYPING_DETECTION
// Typing detection takes place in TransmitMixer::PrepareDemux() and
// TransmitMixer::TypingDetection(). The typing detection algorithm takes as
// input two booleans:
// 1. A signal whether a key was pressed during the audio frame.
// 2. Whether VAD is active or not.
// TransmitMixer will not even call the detector if APM has set kVadUnknown in
// the audio frame after near end processing, so enabling/disabling VAD is
// sufficient for turning typing detection on/off.
// TODO(solenberg): Rather than relying on a side effect, consider forcing the
// feature on/off in TransmitMixer.
VoiceDetection* vd = apm->voice_detection();
if (vd->Enable(enable)) {
LOG(LS_ERROR) << "Failed to enable/disable VAD: " << enable;
return;
}
if (vd->set_likelihood(VoiceDetection::kVeryLowLikelihood)) {
LOG(LS_ERROR) << "Failed to set low VAD likelihood.";
return;
}
LOG(LS_INFO) << "VAD set to " << enable << " for typing detection.";
#endif
}
} // namespace apm_helpers
} // namespace webrtc