/*
 *  Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include "modules/audio_device/audio_device_buffer.h"

#include <string.h>

#include <cmath>
#include <cstddef>
#include <cstdint>

#include "common_audio/signal_processing/include/signal_processing_library.h"
#include "rtc_base/checks.h"
#include "rtc_base/logging.h"
#include "rtc_base/time_utils.h"
#include "system_wrappers/include/metrics.h"

namespace webrtc {

static const char kTimerQueueName[] = "AudioDeviceBufferTimer";

// Time between two sucessive calls to LogStats().
static const size_t kTimerIntervalInSeconds = 10;
static const size_t kTimerIntervalInMilliseconds =
    kTimerIntervalInSeconds * rtc::kNumMillisecsPerSec;
// Min time required to qualify an audio session as a "call". If playout or
// recording has been active for less than this time we will not store any
// logs or UMA stats but instead consider the call as too short.
static const size_t kMinValidCallTimeTimeInSeconds = 10;
static const size_t kMinValidCallTimeTimeInMilliseconds =
    kMinValidCallTimeTimeInSeconds * rtc::kNumMillisecsPerSec;
#ifdef AUDIO_DEVICE_PLAYS_SINUS_TONE
static const double k2Pi = 6.28318530717959;
#endif

AudioDeviceBuffer::AudioDeviceBuffer(TaskQueueFactory* task_queue_factory)
    : task_queue_(task_queue_factory->CreateTaskQueue(
          kTimerQueueName,
          TaskQueueFactory::Priority::NORMAL)),
      audio_transport_cb_(nullptr),
      rec_sample_rate_(0),
      play_sample_rate_(0),
      rec_channels_(0),
      play_channels_(0),
      playing_(false),
      recording_(false),
      typing_status_(false),
      play_delay_ms_(0),
      rec_delay_ms_(0),
      capture_timestamp_ns_(0),
      num_stat_reports_(0),
      last_timer_task_time_(0),
      rec_stat_count_(0),
      play_stat_count_(0),
      play_start_time_(0),
      only_silence_recorded_(true),
      log_stats_(false) {
  RTC_LOG(LS_INFO) << "AudioDeviceBuffer::ctor";
#ifdef AUDIO_DEVICE_PLAYS_SINUS_TONE
  phase_ = 0.0;
  RTC_LOG(LS_WARNING) << "AUDIO_DEVICE_PLAYS_SINUS_TONE is defined!";
#endif
}

AudioDeviceBuffer::~AudioDeviceBuffer() {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  RTC_DCHECK(!playing_);
  RTC_DCHECK(!recording_);
  RTC_LOG(LS_INFO) << "AudioDeviceBuffer::~dtor";
}

int32_t AudioDeviceBuffer::RegisterAudioCallback(
    AudioTransport* audio_callback) {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  RTC_DLOG(LS_INFO) << __FUNCTION__;
  if (playing_ || recording_) {
    RTC_LOG(LS_ERROR) << "Failed to set audio transport since media was active";
    return -1;
  }
  audio_transport_cb_ = audio_callback;
  return 0;
}

void AudioDeviceBuffer::StartPlayout() {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  // TODO(henrika): allow for usage of DCHECK(!playing_) here instead. Today the
  // ADM allows calling Start(), Start() by ignoring the second call but it
  // makes more sense to only allow one call.
  if (playing_) {
    return;
  }
  RTC_DLOG(LS_INFO) << __FUNCTION__;
  // Clear members tracking playout stats and do it on the task queue.
  task_queue_.PostTask([this] { ResetPlayStats(); });
  // Start a periodic timer based on task queue if not already done by the
  // recording side.
  if (!recording_) {
    StartPeriodicLogging();
  }
  const int64_t now_time = rtc::TimeMillis();
  // Clear members that are only touched on the main (creating) thread.
  play_start_time_ = now_time;
  playing_ = true;
}

void AudioDeviceBuffer::StartRecording() {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  if (recording_) {
    return;
  }
  RTC_DLOG(LS_INFO) << __FUNCTION__;
  // Clear members tracking recording stats and do it on the task queue.
  task_queue_.PostTask([this] { ResetRecStats(); });
  // Start a periodic timer based on task queue if not already done by the
  // playout side.
  if (!playing_) {
    StartPeriodicLogging();
  }
  // Clear members that will be touched on the main (creating) thread.
  rec_start_time_ = rtc::TimeMillis();
  recording_ = true;
  // And finally a member which can be modified on the native audio thread.
  // It is safe to do so since we know by design that the owning ADM has not
  // yet started the native audio recording.
  only_silence_recorded_ = true;
}

void AudioDeviceBuffer::StopPlayout() {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  if (!playing_) {
    return;
  }
  RTC_DLOG(LS_INFO) << __FUNCTION__;
  playing_ = false;
  // Stop periodic logging if no more media is active.
  if (!recording_) {
    StopPeriodicLogging();
  }
  RTC_LOG(LS_INFO) << "total playout time: "
                   << rtc::TimeSince(play_start_time_);
}

void AudioDeviceBuffer::StopRecording() {
  RTC_DCHECK_RUN_ON(&main_thread_checker_);
  if (!recording_) {
    return;
  }
  RTC_DLOG(LS_INFO) << __FUNCTION__;
  recording_ = false;
  // Stop periodic logging if no more media is active.
  if (!playing_) {
    StopPeriodicLogging();
  }
  // Add UMA histogram to keep track of the case when only zeros have been
  // recorded. Measurements (max of absolute level) are taken twice per second,
  // which means that if e.g 10 seconds of audio has been recorded, a total of
  // 20 level estimates must all be identical to zero to trigger the histogram.
  // `only_silence_recorded_` can only be cleared on the native audio thread
  // that drives audio capture but we know by design that the audio has stopped
  // when this method is called, hence there should not be aby conflicts. Also,
  // the fact that `only_silence_recorded_` can be affected during the complete
  // call makes chances of conflicts with potentially one last callback very
  // small.
  const size_t time_since_start = rtc::TimeSince(rec_start_time_);
  if (time_since_start > kMinValidCallTimeTimeInMilliseconds) {
    const int only_zeros = static_cast<int>(only_silence_recorded_);
    RTC_HISTOGRAM_BOOLEAN("WebRTC.Audio.RecordedOnlyZeros", only_zeros);
    RTC_LOG(LS_INFO) << "HISTOGRAM(WebRTC.Audio.RecordedOnlyZeros): "
                     << only_zeros;
  }
  RTC_LOG(LS_INFO) << "total recording time: " << time_since_start;
}

int32_t AudioDeviceBuffer::SetRecordingSampleRate(uint32_t fsHz) {
  RTC_LOG(LS_INFO) << "SetRecordingSampleRate(" << fsHz << ")";
  rec_sample_rate_ = fsHz;
  return 0;
}

int32_t AudioDeviceBuffer::SetPlayoutSampleRate(uint32_t fsHz) {
  RTC_LOG(LS_INFO) << "SetPlayoutSampleRate(" << fsHz << ")";
  play_sample_rate_ = fsHz;
  return 0;
}

uint32_t AudioDeviceBuffer::RecordingSampleRate() const {
  return rec_sample_rate_;
}

uint32_t AudioDeviceBuffer::PlayoutSampleRate() const {
  return play_sample_rate_;
}

int32_t AudioDeviceBuffer::SetRecordingChannels(size_t channels) {
  RTC_LOG(LS_INFO) << "SetRecordingChannels(" << channels << ")";
  rec_channels_ = channels;
  return 0;
}

int32_t AudioDeviceBuffer::SetPlayoutChannels(size_t channels) {
  RTC_LOG(LS_INFO) << "SetPlayoutChannels(" << channels << ")";
  play_channels_ = channels;
  return 0;
}

size_t AudioDeviceBuffer::RecordingChannels() const {
  return rec_channels_;
}

size_t AudioDeviceBuffer::PlayoutChannels() const {
  return play_channels_;
}

int32_t AudioDeviceBuffer::SetTypingStatus(bool typing_status) {
  typing_status_ = typing_status;
  return 0;
}

void AudioDeviceBuffer::SetVQEData(int play_delay_ms, int rec_delay_ms) {
  play_delay_ms_ = play_delay_ms;
  rec_delay_ms_ = rec_delay_ms;
}

int32_t AudioDeviceBuffer::SetRecordedBuffer(const void* audio_buffer,
                                             size_t samples_per_channel) {
  return SetRecordedBuffer(audio_buffer, samples_per_channel, 0);
}

int32_t AudioDeviceBuffer::SetRecordedBuffer(const void* audio_buffer,
                                             size_t samples_per_channel,
                                             int64_t capture_timestamp_ns) {
  // Copy the complete input buffer to the local buffer.
  const size_t old_size = rec_buffer_.size();
  rec_buffer_.SetData(static_cast<const int16_t*>(audio_buffer),
                      rec_channels_ * samples_per_channel);
  // Keep track of the size of the recording buffer. Only updated when the
  // size changes, which is a rare event.
  if (old_size != rec_buffer_.size()) {
    RTC_LOG(LS_INFO) << "Size of recording buffer: " << rec_buffer_.size();
  }

  // If the timestamp is less then or equal to zero, it's not valid and are
  // ignored. If we do antimestamp alignment on them they might accidentally
  // become greater then zero, and will be handled as if they were a correct
  // timestamp.
  capture_timestamp_ns_ =
      (capture_timestamp_ns > 0)
          ? rtc::kNumNanosecsPerMicrosec *
                timestamp_aligner_.TranslateTimestamp(
                    capture_timestamp_ns_ / rtc::kNumNanosecsPerMicrosec,
                    rtc::TimeMicros())
          : capture_timestamp_ns;
  // Derive a new level value twice per second and check if it is non-zero.
  int16_t max_abs = 0;
  RTC_DCHECK_LT(rec_stat_count_, 50);
  if (++rec_stat_count_ >= 50) {
    // Returns the largest absolute value in a signed 16-bit vector.
    max_abs = WebRtcSpl_MaxAbsValueW16(rec_buffer_.data(), rec_buffer_.size());
    rec_stat_count_ = 0;
    // Set `only_silence_recorded_` to false as soon as at least one detection
    // of a non-zero audio packet is found. It can only be restored to true
    // again by restarting the call.
    if (max_abs > 0) {
      only_silence_recorded_ = false;
    }
  }
  // Update recording stats which is used as base for periodic logging of the
  // audio input state.
  UpdateRecStats(max_abs, samples_per_channel);
  return 0;
}

int32_t AudioDeviceBuffer::DeliverRecordedData() {
  if (!audio_transport_cb_) {
    RTC_LOG(LS_WARNING) << "Invalid audio transport";
    return 0;
  }
  const size_t frames = rec_buffer_.size() / rec_channels_;
  const size_t bytes_per_frame = rec_channels_ * sizeof(int16_t);
  uint32_t new_mic_level_dummy = 0;
  uint32_t total_delay_ms = play_delay_ms_ + rec_delay_ms_;
  int32_t res = audio_transport_cb_->RecordedDataIsAvailable(
      rec_buffer_.data(), frames, bytes_per_frame, rec_channels_,
      rec_sample_rate_, total_delay_ms, 0, 0, typing_status_,
      new_mic_level_dummy, capture_timestamp_ns_);
  if (res == -1) {
    RTC_LOG(LS_ERROR) << "RecordedDataIsAvailable() failed";
  }
  return 0;
}

int32_t AudioDeviceBuffer::RequestPlayoutData(size_t samples_per_channel) {
  // The consumer can change the requested size on the fly and we therefore
  // resize the buffer accordingly. Also takes place at the first call to this
  // method.
  const size_t total_samples = play_channels_ * samples_per_channel;
  if (play_buffer_.size() != total_samples) {
    play_buffer_.SetSize(total_samples);
    RTC_LOG(LS_INFO) << "Size of playout buffer: " << play_buffer_.size();
  }

  size_t num_samples_out(0);
  // It is currently supported to start playout without a valid audio
  // transport object. Leads to warning and silence.
  if (!audio_transport_cb_) {
    RTC_LOG(LS_WARNING) << "Invalid audio transport";
    return 0;
  }

  // Retrieve new 16-bit PCM audio data using the audio transport instance.
  int64_t elapsed_time_ms = -1;
  int64_t ntp_time_ms = -1;
  const size_t bytes_per_frame = play_channels_ * sizeof(int16_t);
  uint32_t res = audio_transport_cb_->NeedMorePlayData(
      samples_per_channel, bytes_per_frame, play_channels_, play_sample_rate_,
      play_buffer_.data(), num_samples_out, &elapsed_time_ms, &ntp_time_ms);
  if (res != 0) {
    RTC_LOG(LS_ERROR) << "NeedMorePlayData() failed";
  }

  // Derive a new level value twice per second.
  int16_t max_abs = 0;
  RTC_DCHECK_LT(play_stat_count_, 50);
  if (++play_stat_count_ >= 50) {
    // Returns the largest absolute value in a signed 16-bit vector.
    max_abs =
        WebRtcSpl_MaxAbsValueW16(play_buffer_.data(), play_buffer_.size());
    play_stat_count_ = 0;
  }
  // Update playout stats which is used as base for periodic logging of the
  // audio output state.
  UpdatePlayStats(max_abs, num_samples_out / play_channels_);
  return static_cast<int32_t>(num_samples_out / play_channels_);
}

int32_t AudioDeviceBuffer::GetPlayoutData(void* audio_buffer) {
  RTC_DCHECK_GT(play_buffer_.size(), 0);
#ifdef AUDIO_DEVICE_PLAYS_SINUS_TONE
  const double phase_increment =
      k2Pi * 440.0 / static_cast<double>(play_sample_rate_);
  int16_t* destination_r = reinterpret_cast<int16_t*>(audio_buffer);
  if (play_channels_ == 1) {
    for (size_t i = 0; i < play_buffer_.size(); ++i) {
      destination_r[i] = static_cast<int16_t>((sin(phase_) * (1 << 14)));
      phase_ += phase_increment;
    }
  } else if (play_channels_ == 2) {
    for (size_t i = 0; i < play_buffer_.size() / 2; ++i) {
      destination_r[2 * i] = destination_r[2 * i + 1] =
          static_cast<int16_t>((sin(phase_) * (1 << 14)));
      phase_ += phase_increment;
    }
  }
#else
  memcpy(audio_buffer, play_buffer_.data(),
         play_buffer_.size() * sizeof(int16_t));
#endif
  // Return samples per channel or number of frames.
  return static_cast<int32_t>(play_buffer_.size() / play_channels_);
}

void AudioDeviceBuffer::StartPeriodicLogging() {
  task_queue_.PostTask([this] { LogStats(AudioDeviceBuffer::LOG_START); });
}

void AudioDeviceBuffer::StopPeriodicLogging() {
  task_queue_.PostTask([this] { LogStats(AudioDeviceBuffer::LOG_STOP); });
}

void AudioDeviceBuffer::LogStats(LogState state) {
  RTC_DCHECK_RUN_ON(&task_queue_);
  int64_t now_time = rtc::TimeMillis();

  if (state == AudioDeviceBuffer::LOG_START) {
    // Reset counters at start. We will not add any logging in this state but
    // the timer will started by posting a new (delayed) task.
    num_stat_reports_ = 0;
    last_timer_task_time_ = now_time;
    log_stats_ = true;
  } else if (state == AudioDeviceBuffer::LOG_STOP) {
    // Stop logging and posting new tasks.
    log_stats_ = false;
  } else if (state == AudioDeviceBuffer::LOG_ACTIVE) {
    // Keep logging unless logging was disabled while task was posted.
  }

  // Avoid adding more logs since we are in STOP mode.
  if (!log_stats_) {
    return;
  }

  int64_t next_callback_time = now_time + kTimerIntervalInMilliseconds;
  int64_t time_since_last = rtc::TimeDiff(now_time, last_timer_task_time_);
  last_timer_task_time_ = now_time;

  Stats stats;
  {
    MutexLock lock(&lock_);
    stats = stats_;
    stats_.max_rec_level = 0;
    stats_.max_play_level = 0;
  }

  // Cache current sample rate from atomic members.
  const uint32_t rec_sample_rate = rec_sample_rate_;
  const uint32_t play_sample_rate = play_sample_rate_;

  // Log the latest statistics but skip the first two rounds just after state
  // was set to LOG_START to ensure that we have at least one full stable
  // 10-second interval for sample-rate estimation. Hence, first printed log
  // will be after ~20 seconds.
  if (++num_stat_reports_ > 2 &&
      static_cast<size_t>(time_since_last) > kTimerIntervalInMilliseconds / 2) {
    uint32_t diff_samples = stats.rec_samples - last_stats_.rec_samples;
    float rate = diff_samples / (static_cast<float>(time_since_last) / 1000.0);
    uint32_t abs_diff_rate_in_percent = 0;
    if (rec_sample_rate > 0 && rate > 0) {
      abs_diff_rate_in_percent = static_cast<uint32_t>(
          0.5f +
          ((100.0f * std::abs(rate - rec_sample_rate)) / rec_sample_rate));
      RTC_HISTOGRAM_PERCENTAGE("WebRTC.Audio.RecordSampleRateOffsetInPercent",
                               abs_diff_rate_in_percent);
      RTC_LOG(LS_INFO) << "[REC : " << time_since_last << "msec, "
                       << rec_sample_rate / 1000 << "kHz] callbacks: "
                       << stats.rec_callbacks - last_stats_.rec_callbacks
                       << ", "
                          "samples: "
                       << diff_samples
                       << ", "
                          "rate: "
                       << static_cast<int>(rate + 0.5)
                       << ", "
                          "rate diff: "
                       << abs_diff_rate_in_percent
                       << "%, "
                          "level: "
                       << stats.max_rec_level;
    }

    diff_samples = stats.play_samples - last_stats_.play_samples;
    rate = diff_samples / (static_cast<float>(time_since_last) / 1000.0);
    abs_diff_rate_in_percent = 0;
    if (play_sample_rate > 0 && rate > 0) {
      abs_diff_rate_in_percent = static_cast<uint32_t>(
          0.5f +
          ((100.0f * std::abs(rate - play_sample_rate)) / play_sample_rate));
      RTC_HISTOGRAM_PERCENTAGE("WebRTC.Audio.PlayoutSampleRateOffsetInPercent",
                               abs_diff_rate_in_percent);
      RTC_LOG(LS_INFO) << "[PLAY: " << time_since_last << "msec, "
                       << play_sample_rate / 1000 << "kHz] callbacks: "
                       << stats.play_callbacks - last_stats_.play_callbacks
                       << ", "
                          "samples: "
                       << diff_samples
                       << ", "
                          "rate: "
                       << static_cast<int>(rate + 0.5)
                       << ", "
                          "rate diff: "
                       << abs_diff_rate_in_percent
                       << "%, "
                          "level: "
                       << stats.max_play_level;
    }
  }
  last_stats_ = stats;

  int64_t time_to_wait_ms = next_callback_time - rtc::TimeMillis();
  RTC_DCHECK_GT(time_to_wait_ms, 0) << "Invalid timer interval";

  // Keep posting new (delayed) tasks until state is changed to kLogStop.
  task_queue_.PostDelayedTask(
      [this] { AudioDeviceBuffer::LogStats(AudioDeviceBuffer::LOG_ACTIVE); },
      TimeDelta::Millis(time_to_wait_ms));
}

void AudioDeviceBuffer::ResetRecStats() {
  RTC_DCHECK_RUN_ON(&task_queue_);
  last_stats_.ResetRecStats();
  MutexLock lock(&lock_);
  stats_.ResetRecStats();
}

void AudioDeviceBuffer::ResetPlayStats() {
  RTC_DCHECK_RUN_ON(&task_queue_);
  last_stats_.ResetPlayStats();
  MutexLock lock(&lock_);
  stats_.ResetPlayStats();
}

void AudioDeviceBuffer::UpdateRecStats(int16_t max_abs,
                                       size_t samples_per_channel) {
  MutexLock lock(&lock_);
  ++stats_.rec_callbacks;
  stats_.rec_samples += samples_per_channel;
  if (max_abs > stats_.max_rec_level) {
    stats_.max_rec_level = max_abs;
  }
}

void AudioDeviceBuffer::UpdatePlayStats(int16_t max_abs,
                                        size_t samples_per_channel) {
  MutexLock lock(&lock_);
  ++stats_.play_callbacks;
  stats_.play_samples += samples_per_channel;
  if (max_abs > stats_.max_play_level) {
    stats_.max_play_level = max_abs;
  }
}

}  // namespace webrtc