blob: ffdcc0a258bab49dfc987ead4888e2c801f9dd99 [file] [log] [blame]
/*
* Copyright 2017 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#ifndef API_RTC_ERROR_H_
#define API_RTC_ERROR_H_
#ifdef UNIT_TEST
#include <ostream>
#endif // UNIT_TEST
#include <string>
#include <utility> // For std::move.
#include "rtc_base/checks.h"
#include "rtc_base/logging.h"
#include "rtc_base/system/rtc_export.h"
namespace webrtc {
// Enumeration to represent distinct classes of errors that an application
// may wish to act upon differently. These roughly map to DOMExceptions or
// RTCError "errorDetailEnum" values in the web API, as described in the
// comments below.
enum class RTCErrorType {
// No error.
NONE,
// An operation is valid, but currently unsupported.
// Maps to OperationError DOMException.
UNSUPPORTED_OPERATION,
// A supplied parameter is valid, but currently unsupported.
// Maps to OperationError DOMException.
UNSUPPORTED_PARAMETER,
// General error indicating that a supplied parameter is invalid.
// Maps to InvalidAccessError or TypeError DOMException depending on context.
INVALID_PARAMETER,
// Slightly more specific than INVALID_PARAMETER; a parameter's value was
// outside the allowed range.
// Maps to RangeError DOMException.
INVALID_RANGE,
// Slightly more specific than INVALID_PARAMETER; an error occurred while
// parsing string input.
// Maps to SyntaxError DOMException.
SYNTAX_ERROR,
// The object does not support this operation in its current state.
// Maps to InvalidStateError DOMException.
INVALID_STATE,
// An attempt was made to modify the object in an invalid way.
// Maps to InvalidModificationError DOMException.
INVALID_MODIFICATION,
// An error occurred within an underlying network protocol.
// Maps to NetworkError DOMException.
NETWORK_ERROR,
// Some resource has been exhausted; file handles, hardware resources, ports,
// etc.
// Maps to OperationError DOMException.
RESOURCE_EXHAUSTED,
// The operation failed due to an internal error.
// Maps to OperationError DOMException.
INTERNAL_ERROR,
};
// Roughly corresponds to RTCError in the web api. Holds an error type, a
// message, and possibly additional information specific to that error.
//
// Doesn't contain anything beyond a type and message now, but will in the
// future as more errors are implemented.
class RTC_EXPORT RTCError {
public:
// Constructors.
// Creates a "no error" error.
RTCError() {}
explicit RTCError(RTCErrorType type) : type_(type) {}
RTCError(RTCErrorType type, std::string message)
: type_(type), message_(std::move(message)) {}
// Delete the copy constructor and assignment operator; there aren't any use
// cases where you should need to copy an RTCError, as opposed to moving it.
// Can revisit this decision if use cases arise in the future.
RTCError(const RTCError& other) = delete;
RTCError& operator=(const RTCError& other) = delete;
// Move constructor and move-assignment operator.
RTCError(RTCError&& other);
RTCError& operator=(RTCError&& other);
// Identical to default constructed error.
//
// Preferred over the default constructor for code readability.
static RTCError OK();
// Error type.
RTCErrorType type() const { return type_; }
void set_type(RTCErrorType type) { type_ = type; }
// Human-readable message describing the error. Shouldn't be used for
// anything but logging/diagnostics, since messages are not guaranteed to be
// stable.
const char* message() const;
void set_message(std::string message);
// Convenience method for situations where you only care whether or not an
// error occurred.
bool ok() const { return type_ == RTCErrorType::NONE; }
private:
RTCErrorType type_ = RTCErrorType::NONE;
std::string message_;
};
// Outputs the error as a friendly string. Update this method when adding a new
// error type.
//
// Only intended to be used for logging/diagnostics. The returned char* points
// to literal string that lives for the whole duration of the program.
const char* ToString(RTCErrorType error);
#ifdef UNIT_TEST
inline std::ostream& operator<<( // no-presubmit-check TODO(webrtc:8982)
std::ostream& stream, // no-presubmit-check TODO(webrtc:8982)
RTCErrorType error) {
return stream << ToString(error);
}
#endif // UNIT_TEST
// Helper macro that can be used by implementations to create an error with a
// message and log it. |message| should be a string literal or movable
// std::string.
#define LOG_AND_RETURN_ERROR_EX(type, message, severity) \
{ \
RTC_DCHECK(type != RTCErrorType::NONE); \
RTC_LOG(severity) << message << " (" << ToString(type) << ")"; \
return webrtc::RTCError(type, message); \
}
#define LOG_AND_RETURN_ERROR(type, message) \
LOG_AND_RETURN_ERROR_EX(type, message, LS_ERROR)
// RTCErrorOr<T> is the union of an RTCError object and a T object. RTCErrorOr
// models the concept of an object that is either a usable value, or an error
// Status explaining why such a value is not present. To this end RTCErrorOr<T>
// does not allow its RTCErrorType value to be RTCErrorType::NONE. This is
// enforced by a debug check in most cases.
//
// The primary use-case for RTCErrorOr<T> is as the return value of a function
// which may fail. For example, CreateRtpSender will fail if the parameters
// could not be successfully applied at the media engine level, but if
// successful will return a unique_ptr to an RtpSender.
//
// Example client usage for a RTCErrorOr<std::unique_ptr<T>>:
//
// RTCErrorOr<std::unique_ptr<Foo>> result = FooFactory::MakeNewFoo(arg);
// if (result.ok()) {
// std::unique_ptr<Foo> foo = result.ConsumeValue();
// foo->DoSomethingCool();
// } else {
// RTC_LOG(LS_ERROR) << result.error();
// }
//
// Example factory implementation returning RTCErrorOr<std::unique_ptr<T>>:
//
// RTCErrorOr<std::unique_ptr<Foo>> FooFactory::MakeNewFoo(int arg) {
// if (arg <= 0) {
// return RTCError(RTCErrorType::INVALID_RANGE, "Arg must be positive");
// } else {
// return std::unique_ptr<Foo>(new Foo(arg));
// }
// }
//
template <typename T>
class RTCErrorOr {
// Used to convert between RTCErrorOr<Foo>/RtcErrorOr<Bar>, when an implicit
// conversion from Foo to Bar exists.
template <typename U>
friend class RTCErrorOr;
public:
typedef T element_type;
// Constructs a new RTCErrorOr with RTCErrorType::INTERNAL_ERROR error. This
// is marked 'explicit' to try to catch cases like 'return {};', where people
// think RTCErrorOr<std::vector<int>> will be initialized with an empty
// vector, instead of a RTCErrorType::INTERNAL_ERROR error.
RTCErrorOr() : error_(RTCErrorType::INTERNAL_ERROR) {}
// Constructs a new RTCErrorOr with the given non-ok error. After calling
// this constructor, calls to value() will DCHECK-fail.
//
// NOTE: Not explicit - we want to use RTCErrorOr<T> as a return
// value, so it is convenient and sensible to be able to do 'return
// RTCError(...)' when the return type is RTCErrorOr<T>.
//
// REQUIRES: !error.ok(). This requirement is DCHECKed.
RTCErrorOr(RTCError&& error) : error_(std::move(error)) { // NOLINT
RTC_DCHECK(!error.ok());
}
// Constructs a new RTCErrorOr with the given value. After calling this
// constructor, calls to value() will succeed, and calls to error() will
// return a default-constructed RTCError.
//
// NOTE: Not explicit - we want to use RTCErrorOr<T> as a return type
// so it is convenient and sensible to be able to do 'return T()'
// when the return type is RTCErrorOr<T>.
RTCErrorOr(const T& value) : value_(value) {} // NOLINT
RTCErrorOr(T&& value) : value_(std::move(value)) {} // NOLINT
// Delete the copy constructor and assignment operator; there aren't any use
// cases where you should need to copy an RTCErrorOr, as opposed to moving
// it. Can revisit this decision if use cases arise in the future.
RTCErrorOr(const RTCErrorOr& other) = delete;
RTCErrorOr& operator=(const RTCErrorOr& other) = delete;
// Move constructor and move-assignment operator.
//
// Visual Studio doesn't support "= default" with move constructors or
// assignment operators (even though they compile, they segfault), so define
// them explicitly.
RTCErrorOr(RTCErrorOr&& other)
: error_(std::move(other.error_)), value_(std::move(other.value_)) {}
RTCErrorOr& operator=(RTCErrorOr&& other) {
error_ = std::move(other.error_);
value_ = std::move(other.value_);
return *this;
}
// Conversion constructor and assignment operator; T must be copy or move
// constructible from U.
template <typename U>
RTCErrorOr(RTCErrorOr<U> other) // NOLINT
: error_(std::move(other.error_)), value_(std::move(other.value_)) {}
template <typename U>
RTCErrorOr& operator=(RTCErrorOr<U> other) {
error_ = std::move(other.error_);
value_ = std::move(other.value_);
return *this;
}
// Returns a reference to our error. If this contains a T, then returns
// default-constructed RTCError.
const RTCError& error() const { return error_; }
// Moves the error. Can be useful if, say "CreateFoo" returns an
// RTCErrorOr<Foo>, and internally calls "CreateBar" which returns an
// RTCErrorOr<Bar>, and wants to forward the error up the stack.
RTCError MoveError() { return std::move(error_); }
// Returns this->error().ok()
bool ok() const { return error_.ok(); }
// Returns a reference to our current value, or DCHECK-fails if !this->ok().
//
// Can be convenient for the implementation; for example, a method may want
// to access the value in some way before returning it to the next method on
// the stack.
const T& value() const {
RTC_DCHECK(ok());
return value_;
}
T& value() {
RTC_DCHECK(ok());
return value_;
}
// Moves our current value out of this object and returns it, or DCHECK-fails
// if !this->ok().
T MoveValue() {
RTC_DCHECK(ok());
return std::move(value_);
}
private:
RTCError error_;
T value_;
};
} // namespace webrtc
#endif // API_RTC_ERROR_H_