| /* |
| * Copyright (c) 2012 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include "webrtc/modules/audio_processing/aecm/echo_control_mobile.h" |
| |
| #ifdef AEC_DEBUG |
| #include <stdio.h> |
| #endif |
| #include <stdlib.h> |
| |
| extern "C" { |
| #include "webrtc/common_audio/ring_buffer.h" |
| #include "webrtc/common_audio/signal_processing/include/signal_processing_library.h" |
| } |
| #include "webrtc/modules/audio_processing/aecm/aecm_core.h" |
| |
| #define BUF_SIZE_FRAMES 50 // buffer size (frames) |
| // Maximum length of resampled signal. Must be an integer multiple of frames |
| // (ceil(1/(1 + MIN_SKEW)*2) + 1)*FRAME_LEN |
| // The factor of 2 handles wb, and the + 1 is as a safety margin |
| #define MAX_RESAMP_LEN (5 * FRAME_LEN) |
| |
| static const size_t kBufSizeSamp = BUF_SIZE_FRAMES * FRAME_LEN; // buffer size (samples) |
| static const int kSampMsNb = 8; // samples per ms in nb |
| // Target suppression levels for nlp modes |
| // log{0.001, 0.00001, 0.00000001} |
| static const int kInitCheck = 42; |
| |
| typedef struct |
| { |
| int sampFreq; |
| int scSampFreq; |
| short bufSizeStart; |
| int knownDelay; |
| |
| // Stores the last frame added to the farend buffer |
| short farendOld[2][FRAME_LEN]; |
| short initFlag; // indicates if AEC has been initialized |
| |
| // Variables used for averaging far end buffer size |
| short counter; |
| short sum; |
| short firstVal; |
| short checkBufSizeCtr; |
| |
| // Variables used for delay shifts |
| short msInSndCardBuf; |
| short filtDelay; |
| int timeForDelayChange; |
| int ECstartup; |
| int checkBuffSize; |
| int delayChange; |
| short lastDelayDiff; |
| |
| int16_t echoMode; |
| |
| #ifdef AEC_DEBUG |
| FILE *bufFile; |
| FILE *delayFile; |
| FILE *preCompFile; |
| FILE *postCompFile; |
| #endif // AEC_DEBUG |
| // Structures |
| RingBuffer *farendBuf; |
| |
| AecmCore* aecmCore; |
| } AecMobile; |
| |
| // Estimates delay to set the position of the farend buffer read pointer |
| // (controlled by knownDelay) |
| static int WebRtcAecm_EstBufDelay(AecMobile* aecm, short msInSndCardBuf); |
| |
| // Stuffs the farend buffer if the estimated delay is too large |
| static int WebRtcAecm_DelayComp(AecMobile* aecm); |
| |
| void* WebRtcAecm_Create() { |
| AecMobile* aecm = static_cast<AecMobile*>(malloc(sizeof(AecMobile))); |
| |
| WebRtcSpl_Init(); |
| |
| aecm->aecmCore = WebRtcAecm_CreateCore(); |
| if (!aecm->aecmCore) { |
| WebRtcAecm_Free(aecm); |
| return NULL; |
| } |
| |
| aecm->farendBuf = WebRtc_CreateBuffer(kBufSizeSamp, |
| sizeof(int16_t)); |
| if (!aecm->farendBuf) |
| { |
| WebRtcAecm_Free(aecm); |
| return NULL; |
| } |
| |
| aecm->initFlag = 0; |
| |
| #ifdef AEC_DEBUG |
| aecm->aecmCore->farFile = fopen("aecFar.pcm","wb"); |
| aecm->aecmCore->nearFile = fopen("aecNear.pcm","wb"); |
| aecm->aecmCore->outFile = fopen("aecOut.pcm","wb"); |
| //aecm->aecmCore->outLpFile = fopen("aecOutLp.pcm","wb"); |
| |
| aecm->bufFile = fopen("aecBuf.dat", "wb"); |
| aecm->delayFile = fopen("aecDelay.dat", "wb"); |
| aecm->preCompFile = fopen("preComp.pcm", "wb"); |
| aecm->postCompFile = fopen("postComp.pcm", "wb"); |
| #endif // AEC_DEBUG |
| return aecm; |
| } |
| |
| void WebRtcAecm_Free(void* aecmInst) { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| |
| if (aecm == NULL) { |
| return; |
| } |
| |
| #ifdef AEC_DEBUG |
| fclose(aecm->aecmCore->farFile); |
| fclose(aecm->aecmCore->nearFile); |
| fclose(aecm->aecmCore->outFile); |
| //fclose(aecm->aecmCore->outLpFile); |
| |
| fclose(aecm->bufFile); |
| fclose(aecm->delayFile); |
| fclose(aecm->preCompFile); |
| fclose(aecm->postCompFile); |
| #endif // AEC_DEBUG |
| WebRtcAecm_FreeCore(aecm->aecmCore); |
| WebRtc_FreeBuffer(aecm->farendBuf); |
| free(aecm); |
| } |
| |
| int32_t WebRtcAecm_Init(void *aecmInst, int32_t sampFreq) |
| { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| AecmConfig aecConfig; |
| |
| if (aecm == NULL) |
| { |
| return -1; |
| } |
| |
| if (sampFreq != 8000 && sampFreq != 16000) |
| { |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| aecm->sampFreq = sampFreq; |
| |
| // Initialize AECM core |
| if (WebRtcAecm_InitCore(aecm->aecmCore, aecm->sampFreq) == -1) |
| { |
| return AECM_UNSPECIFIED_ERROR; |
| } |
| |
| // Initialize farend buffer |
| WebRtc_InitBuffer(aecm->farendBuf); |
| |
| aecm->initFlag = kInitCheck; // indicates that initialization has been done |
| |
| aecm->delayChange = 1; |
| |
| aecm->sum = 0; |
| aecm->counter = 0; |
| aecm->checkBuffSize = 1; |
| aecm->firstVal = 0; |
| |
| aecm->ECstartup = 1; |
| aecm->bufSizeStart = 0; |
| aecm->checkBufSizeCtr = 0; |
| aecm->filtDelay = 0; |
| aecm->timeForDelayChange = 0; |
| aecm->knownDelay = 0; |
| aecm->lastDelayDiff = 0; |
| |
| memset(&aecm->farendOld[0][0], 0, 160); |
| |
| // Default settings. |
| aecConfig.cngMode = AecmTrue; |
| aecConfig.echoMode = 3; |
| |
| if (WebRtcAecm_set_config(aecm, aecConfig) == -1) |
| { |
| return AECM_UNSPECIFIED_ERROR; |
| } |
| |
| return 0; |
| } |
| |
| // Returns any error that is caused when buffering the |
| // farend signal. |
| int32_t WebRtcAecm_GetBufferFarendError(void *aecmInst, const int16_t *farend, |
| size_t nrOfSamples) { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| |
| if (aecm == NULL) |
| return -1; |
| |
| if (farend == NULL) |
| return AECM_NULL_POINTER_ERROR; |
| |
| if (aecm->initFlag != kInitCheck) |
| return AECM_UNINITIALIZED_ERROR; |
| |
| if (nrOfSamples != 80 && nrOfSamples != 160) |
| return AECM_BAD_PARAMETER_ERROR; |
| |
| return 0; |
| } |
| |
| |
| int32_t WebRtcAecm_BufferFarend(void *aecmInst, const int16_t *farend, |
| size_t nrOfSamples) { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| |
| const int32_t err = |
| WebRtcAecm_GetBufferFarendError(aecmInst, farend, nrOfSamples); |
| |
| if (err != 0) |
| return err; |
| |
| // TODO(unknown): Is this really a good idea? |
| if (!aecm->ECstartup) |
| { |
| WebRtcAecm_DelayComp(aecm); |
| } |
| |
| WebRtc_WriteBuffer(aecm->farendBuf, farend, nrOfSamples); |
| |
| return 0; |
| } |
| |
| int32_t WebRtcAecm_Process(void *aecmInst, const int16_t *nearendNoisy, |
| const int16_t *nearendClean, int16_t *out, |
| size_t nrOfSamples, int16_t msInSndCardBuf) |
| { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| int32_t retVal = 0; |
| size_t i; |
| short nmbrOfFilledBuffers; |
| size_t nBlocks10ms; |
| size_t nFrames; |
| #ifdef AEC_DEBUG |
| short msInAECBuf; |
| #endif |
| |
| if (aecm == NULL) |
| { |
| return -1; |
| } |
| |
| if (nearendNoisy == NULL) |
| { |
| return AECM_NULL_POINTER_ERROR; |
| } |
| |
| if (out == NULL) |
| { |
| return AECM_NULL_POINTER_ERROR; |
| } |
| |
| if (aecm->initFlag != kInitCheck) |
| { |
| return AECM_UNINITIALIZED_ERROR; |
| } |
| |
| if (nrOfSamples != 80 && nrOfSamples != 160) |
| { |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| |
| if (msInSndCardBuf < 0) |
| { |
| msInSndCardBuf = 0; |
| retVal = AECM_BAD_PARAMETER_WARNING; |
| } else if (msInSndCardBuf > 500) |
| { |
| msInSndCardBuf = 500; |
| retVal = AECM_BAD_PARAMETER_WARNING; |
| } |
| msInSndCardBuf += 10; |
| aecm->msInSndCardBuf = msInSndCardBuf; |
| |
| nFrames = nrOfSamples / FRAME_LEN; |
| nBlocks10ms = nFrames / aecm->aecmCore->mult; |
| |
| if (aecm->ECstartup) |
| { |
| if (nearendClean == NULL) |
| { |
| if (out != nearendNoisy) |
| { |
| memcpy(out, nearendNoisy, sizeof(short) * nrOfSamples); |
| } |
| } else if (out != nearendClean) |
| { |
| memcpy(out, nearendClean, sizeof(short) * nrOfSamples); |
| } |
| |
| nmbrOfFilledBuffers = |
| (short) WebRtc_available_read(aecm->farendBuf) / FRAME_LEN; |
| // The AECM is in the start up mode |
| // AECM is disabled until the soundcard buffer and farend buffers are OK |
| |
| // Mechanism to ensure that the soundcard buffer is reasonably stable. |
| if (aecm->checkBuffSize) |
| { |
| aecm->checkBufSizeCtr++; |
| // Before we fill up the far end buffer we require the amount of data on the |
| // sound card to be stable (+/-8 ms) compared to the first value. This |
| // comparison is made during the following 4 consecutive frames. If it seems |
| // to be stable then we start to fill up the far end buffer. |
| |
| if (aecm->counter == 0) |
| { |
| aecm->firstVal = aecm->msInSndCardBuf; |
| aecm->sum = 0; |
| } |
| |
| if (abs(aecm->firstVal - aecm->msInSndCardBuf) |
| < WEBRTC_SPL_MAX(0.2 * aecm->msInSndCardBuf, kSampMsNb)) |
| { |
| aecm->sum += aecm->msInSndCardBuf; |
| aecm->counter++; |
| } else |
| { |
| aecm->counter = 0; |
| } |
| |
| if (aecm->counter * nBlocks10ms >= 6) |
| { |
| // The farend buffer size is determined in blocks of 80 samples |
| // Use 75% of the average value of the soundcard buffer |
| aecm->bufSizeStart |
| = WEBRTC_SPL_MIN((3 * aecm->sum |
| * aecm->aecmCore->mult) / (aecm->counter * 40), BUF_SIZE_FRAMES); |
| // buffersize has now been determined |
| aecm->checkBuffSize = 0; |
| } |
| |
| if (aecm->checkBufSizeCtr * nBlocks10ms > 50) |
| { |
| // for really bad sound cards, don't disable echocanceller for more than 0.5 sec |
| aecm->bufSizeStart = WEBRTC_SPL_MIN((3 * aecm->msInSndCardBuf |
| * aecm->aecmCore->mult) / 40, BUF_SIZE_FRAMES); |
| aecm->checkBuffSize = 0; |
| } |
| } |
| |
| // if checkBuffSize changed in the if-statement above |
| if (!aecm->checkBuffSize) |
| { |
| // soundcard buffer is now reasonably stable |
| // When the far end buffer is filled with approximately the same amount of |
| // data as the amount on the sound card we end the start up phase and start |
| // to cancel echoes. |
| |
| if (nmbrOfFilledBuffers == aecm->bufSizeStart) |
| { |
| aecm->ECstartup = 0; // Enable the AECM |
| } else if (nmbrOfFilledBuffers > aecm->bufSizeStart) |
| { |
| WebRtc_MoveReadPtr(aecm->farendBuf, |
| (int) WebRtc_available_read(aecm->farendBuf) |
| - (int) aecm->bufSizeStart * FRAME_LEN); |
| aecm->ECstartup = 0; |
| } |
| } |
| |
| } else |
| { |
| // AECM is enabled |
| |
| // Note only 1 block supported for nb and 2 blocks for wb |
| for (i = 0; i < nFrames; i++) |
| { |
| int16_t farend[FRAME_LEN]; |
| const int16_t* farend_ptr = NULL; |
| |
| nmbrOfFilledBuffers = |
| (short) WebRtc_available_read(aecm->farendBuf) / FRAME_LEN; |
| |
| // Check that there is data in the far end buffer |
| if (nmbrOfFilledBuffers > 0) |
| { |
| // Get the next 80 samples from the farend buffer |
| WebRtc_ReadBuffer(aecm->farendBuf, (void**) &farend_ptr, farend, |
| FRAME_LEN); |
| |
| // Always store the last frame for use when we run out of data |
| memcpy(&(aecm->farendOld[i][0]), farend_ptr, |
| FRAME_LEN * sizeof(short)); |
| } else |
| { |
| // We have no data so we use the last played frame |
| memcpy(farend, &(aecm->farendOld[i][0]), FRAME_LEN * sizeof(short)); |
| farend_ptr = farend; |
| } |
| |
| // Call buffer delay estimator when all data is extracted, |
| // i,e. i = 0 for NB and i = 1 for WB |
| if ((i == 0 && aecm->sampFreq == 8000) || (i == 1 && aecm->sampFreq == 16000)) |
| { |
| WebRtcAecm_EstBufDelay(aecm, aecm->msInSndCardBuf); |
| } |
| |
| // Call the AECM |
| /*WebRtcAecm_ProcessFrame(aecm->aecmCore, farend, &nearend[FRAME_LEN * i], |
| &out[FRAME_LEN * i], aecm->knownDelay);*/ |
| if (WebRtcAecm_ProcessFrame(aecm->aecmCore, |
| farend_ptr, |
| &nearendNoisy[FRAME_LEN * i], |
| (nearendClean |
| ? &nearendClean[FRAME_LEN * i] |
| : NULL), |
| &out[FRAME_LEN * i]) == -1) |
| return -1; |
| } |
| } |
| |
| #ifdef AEC_DEBUG |
| msInAECBuf = (short) WebRtc_available_read(aecm->farendBuf) / |
| (kSampMsNb * aecm->aecmCore->mult); |
| fwrite(&msInAECBuf, 2, 1, aecm->bufFile); |
| fwrite(&(aecm->knownDelay), sizeof(aecm->knownDelay), 1, aecm->delayFile); |
| #endif |
| |
| return retVal; |
| } |
| |
| int32_t WebRtcAecm_set_config(void *aecmInst, AecmConfig config) |
| { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| |
| if (aecm == NULL) |
| { |
| return -1; |
| } |
| |
| if (aecm->initFlag != kInitCheck) |
| { |
| return AECM_UNINITIALIZED_ERROR; |
| } |
| |
| if (config.cngMode != AecmFalse && config.cngMode != AecmTrue) |
| { |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| aecm->aecmCore->cngMode = config.cngMode; |
| |
| if (config.echoMode < 0 || config.echoMode > 4) |
| { |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| aecm->echoMode = config.echoMode; |
| |
| if (aecm->echoMode == 0) |
| { |
| aecm->aecmCore->supGain = SUPGAIN_DEFAULT >> 3; |
| aecm->aecmCore->supGainOld = SUPGAIN_DEFAULT >> 3; |
| aecm->aecmCore->supGainErrParamA = SUPGAIN_ERROR_PARAM_A >> 3; |
| aecm->aecmCore->supGainErrParamD = SUPGAIN_ERROR_PARAM_D >> 3; |
| aecm->aecmCore->supGainErrParamDiffAB = (SUPGAIN_ERROR_PARAM_A >> 3) |
| - (SUPGAIN_ERROR_PARAM_B >> 3); |
| aecm->aecmCore->supGainErrParamDiffBD = (SUPGAIN_ERROR_PARAM_B >> 3) |
| - (SUPGAIN_ERROR_PARAM_D >> 3); |
| } else if (aecm->echoMode == 1) |
| { |
| aecm->aecmCore->supGain = SUPGAIN_DEFAULT >> 2; |
| aecm->aecmCore->supGainOld = SUPGAIN_DEFAULT >> 2; |
| aecm->aecmCore->supGainErrParamA = SUPGAIN_ERROR_PARAM_A >> 2; |
| aecm->aecmCore->supGainErrParamD = SUPGAIN_ERROR_PARAM_D >> 2; |
| aecm->aecmCore->supGainErrParamDiffAB = (SUPGAIN_ERROR_PARAM_A >> 2) |
| - (SUPGAIN_ERROR_PARAM_B >> 2); |
| aecm->aecmCore->supGainErrParamDiffBD = (SUPGAIN_ERROR_PARAM_B >> 2) |
| - (SUPGAIN_ERROR_PARAM_D >> 2); |
| } else if (aecm->echoMode == 2) |
| { |
| aecm->aecmCore->supGain = SUPGAIN_DEFAULT >> 1; |
| aecm->aecmCore->supGainOld = SUPGAIN_DEFAULT >> 1; |
| aecm->aecmCore->supGainErrParamA = SUPGAIN_ERROR_PARAM_A >> 1; |
| aecm->aecmCore->supGainErrParamD = SUPGAIN_ERROR_PARAM_D >> 1; |
| aecm->aecmCore->supGainErrParamDiffAB = (SUPGAIN_ERROR_PARAM_A >> 1) |
| - (SUPGAIN_ERROR_PARAM_B >> 1); |
| aecm->aecmCore->supGainErrParamDiffBD = (SUPGAIN_ERROR_PARAM_B >> 1) |
| - (SUPGAIN_ERROR_PARAM_D >> 1); |
| } else if (aecm->echoMode == 3) |
| { |
| aecm->aecmCore->supGain = SUPGAIN_DEFAULT; |
| aecm->aecmCore->supGainOld = SUPGAIN_DEFAULT; |
| aecm->aecmCore->supGainErrParamA = SUPGAIN_ERROR_PARAM_A; |
| aecm->aecmCore->supGainErrParamD = SUPGAIN_ERROR_PARAM_D; |
| aecm->aecmCore->supGainErrParamDiffAB = SUPGAIN_ERROR_PARAM_A - SUPGAIN_ERROR_PARAM_B; |
| aecm->aecmCore->supGainErrParamDiffBD = SUPGAIN_ERROR_PARAM_B - SUPGAIN_ERROR_PARAM_D; |
| } else if (aecm->echoMode == 4) |
| { |
| aecm->aecmCore->supGain = SUPGAIN_DEFAULT << 1; |
| aecm->aecmCore->supGainOld = SUPGAIN_DEFAULT << 1; |
| aecm->aecmCore->supGainErrParamA = SUPGAIN_ERROR_PARAM_A << 1; |
| aecm->aecmCore->supGainErrParamD = SUPGAIN_ERROR_PARAM_D << 1; |
| aecm->aecmCore->supGainErrParamDiffAB = (SUPGAIN_ERROR_PARAM_A << 1) |
| - (SUPGAIN_ERROR_PARAM_B << 1); |
| aecm->aecmCore->supGainErrParamDiffBD = (SUPGAIN_ERROR_PARAM_B << 1) |
| - (SUPGAIN_ERROR_PARAM_D << 1); |
| } |
| |
| return 0; |
| } |
| |
| int32_t WebRtcAecm_InitEchoPath(void* aecmInst, |
| const void* echo_path, |
| size_t size_bytes) |
| { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| const int16_t* echo_path_ptr = static_cast<const int16_t*>(echo_path); |
| |
| if (aecmInst == NULL) { |
| return -1; |
| } |
| if (echo_path == NULL) { |
| return AECM_NULL_POINTER_ERROR; |
| } |
| if (size_bytes != WebRtcAecm_echo_path_size_bytes()) |
| { |
| // Input channel size does not match the size of AECM |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| if (aecm->initFlag != kInitCheck) |
| { |
| return AECM_UNINITIALIZED_ERROR; |
| } |
| |
| WebRtcAecm_InitEchoPathCore(aecm->aecmCore, echo_path_ptr); |
| |
| return 0; |
| } |
| |
| int32_t WebRtcAecm_GetEchoPath(void* aecmInst, |
| void* echo_path, |
| size_t size_bytes) |
| { |
| AecMobile* aecm = static_cast<AecMobile*>(aecmInst); |
| int16_t* echo_path_ptr = static_cast<int16_t*>(echo_path); |
| |
| if (aecmInst == NULL) { |
| return -1; |
| } |
| if (echo_path == NULL) { |
| return AECM_NULL_POINTER_ERROR; |
| } |
| if (size_bytes != WebRtcAecm_echo_path_size_bytes()) |
| { |
| // Input channel size does not match the size of AECM |
| return AECM_BAD_PARAMETER_ERROR; |
| } |
| if (aecm->initFlag != kInitCheck) |
| { |
| return AECM_UNINITIALIZED_ERROR; |
| } |
| |
| memcpy(echo_path_ptr, aecm->aecmCore->channelStored, size_bytes); |
| return 0; |
| } |
| |
| size_t WebRtcAecm_echo_path_size_bytes() |
| { |
| return (PART_LEN1 * sizeof(int16_t)); |
| } |
| |
| |
| static int WebRtcAecm_EstBufDelay(AecMobile* aecm, short msInSndCardBuf) { |
| short delayNew, nSampSndCard; |
| short nSampFar = (short) WebRtc_available_read(aecm->farendBuf); |
| short diff; |
| |
| nSampSndCard = msInSndCardBuf * kSampMsNb * aecm->aecmCore->mult; |
| |
| delayNew = nSampSndCard - nSampFar; |
| |
| if (delayNew < FRAME_LEN) |
| { |
| WebRtc_MoveReadPtr(aecm->farendBuf, FRAME_LEN); |
| delayNew += FRAME_LEN; |
| } |
| |
| aecm->filtDelay = WEBRTC_SPL_MAX(0, (8 * aecm->filtDelay + 2 * delayNew) / 10); |
| |
| diff = aecm->filtDelay - aecm->knownDelay; |
| if (diff > 224) |
| { |
| if (aecm->lastDelayDiff < 96) |
| { |
| aecm->timeForDelayChange = 0; |
| } else |
| { |
| aecm->timeForDelayChange++; |
| } |
| } else if (diff < 96 && aecm->knownDelay > 0) |
| { |
| if (aecm->lastDelayDiff > 224) |
| { |
| aecm->timeForDelayChange = 0; |
| } else |
| { |
| aecm->timeForDelayChange++; |
| } |
| } else |
| { |
| aecm->timeForDelayChange = 0; |
| } |
| aecm->lastDelayDiff = diff; |
| |
| if (aecm->timeForDelayChange > 25) |
| { |
| aecm->knownDelay = WEBRTC_SPL_MAX((int)aecm->filtDelay - 160, 0); |
| } |
| return 0; |
| } |
| |
| static int WebRtcAecm_DelayComp(AecMobile* aecm) { |
| int nSampFar = (int) WebRtc_available_read(aecm->farendBuf); |
| int nSampSndCard, delayNew, nSampAdd; |
| const int maxStuffSamp = 10 * FRAME_LEN; |
| |
| nSampSndCard = aecm->msInSndCardBuf * kSampMsNb * aecm->aecmCore->mult; |
| delayNew = nSampSndCard - nSampFar; |
| |
| if (delayNew > FAR_BUF_LEN - FRAME_LEN * aecm->aecmCore->mult) |
| { |
| // The difference of the buffer sizes is larger than the maximum |
| // allowed known delay. Compensate by stuffing the buffer. |
| nSampAdd = (int)(WEBRTC_SPL_MAX(((nSampSndCard >> 1) - nSampFar), |
| FRAME_LEN)); |
| nSampAdd = WEBRTC_SPL_MIN(nSampAdd, maxStuffSamp); |
| |
| WebRtc_MoveReadPtr(aecm->farendBuf, -nSampAdd); |
| aecm->delayChange = 1; // the delay needs to be updated |
| } |
| |
| return 0; |
| } |
