| /* |
| * Copyright (c) 2014 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <stdio.h> |
| |
| #include "media/base/streamparams.h" |
| #include "media/engine/constants.h" |
| #include "media/engine/simulcast.h" |
| #include "rtc_base/arraysize.h" |
| #include "rtc_base/logging.h" |
| #include "system_wrappers/include/field_trial.h" |
| |
| namespace cricket { |
| |
| struct SimulcastFormat { |
| int width; |
| int height; |
| // The maximum number of simulcast layers can be used for |
| // resolutions at |widthxheigh|. |
| size_t max_layers; |
| // The maximum bitrate for encoding stream at |widthxheight|, when we are |
| // not sending the next higher spatial stream. |
| int max_bitrate_kbps; |
| // The target bitrate for encoding stream at |widthxheight|, when this layer |
| // is not the highest layer (i.e., when we are sending another higher spatial |
| // stream). |
| int target_bitrate_kbps; |
| // The minimum bitrate needed for encoding stream at |widthxheight|. |
| int min_bitrate_kbps; |
| }; |
| |
| // These tables describe from which resolution we can use how many |
| // simulcast layers at what bitrates (maximum, target, and minimum). |
| // Important!! Keep this table from high resolution to low resolution. |
| const SimulcastFormat kSimulcastFormats[] = { |
| {1920, 1080, 3, 5000, 4000, 800}, |
| {1280, 720, 3, 2500, 2500, 600}, |
| {960, 540, 3, 900, 900, 450}, |
| {640, 360, 2, 700, 500, 150}, |
| {480, 270, 2, 450, 350, 150}, |
| {320, 180, 1, 200, 150, 30}, |
| {0, 0, 1, 200, 150, 30} |
| }; |
| |
| const int kMaxScreenshareSimulcastStreams = 2; |
| |
| // Multiway: Number of temporal layers for each simulcast stream, for maximum |
| // possible number of simulcast streams |kMaxSimulcastStreams|. The array |
| // goes from lowest resolution at position 0 to highest resolution. |
| // For example, first three elements correspond to say: QVGA, VGA, WHD. |
| static const int |
| kDefaultConferenceNumberOfTemporalLayers[webrtc::kMaxSimulcastStreams] = |
| {3, 3, 3, 3}; |
| |
| void GetSimulcastSsrcs(const StreamParams& sp, std::vector<uint32_t>* ssrcs) { |
| const SsrcGroup* sim_group = sp.get_ssrc_group(kSimSsrcGroupSemantics); |
| if (sim_group) { |
| ssrcs->insert( |
| ssrcs->end(), sim_group->ssrcs.begin(), sim_group->ssrcs.end()); |
| } |
| } |
| |
| void MaybeExchangeWidthHeight(int* width, int* height) { |
| // |kSimulcastFormats| assumes |width| >= |height|. If not, exchange them |
| // before comparing. |
| if (*width < *height) { |
| int temp = *width; |
| *width = *height; |
| *height = temp; |
| } |
| } |
| |
| int FindSimulcastFormatIndex(int width, int height) { |
| MaybeExchangeWidthHeight(&width, &height); |
| |
| for (uint32_t i = 0; i < arraysize(kSimulcastFormats); ++i) { |
| if (width * height >= |
| kSimulcastFormats[i].width * kSimulcastFormats[i].height) { |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| int FindSimulcastFormatIndex(int width, int height, size_t max_layers) { |
| MaybeExchangeWidthHeight(&width, &height); |
| |
| for (uint32_t i = 0; i < arraysize(kSimulcastFormats); ++i) { |
| if (width * height >= |
| kSimulcastFormats[i].width * kSimulcastFormats[i].height && |
| max_layers == kSimulcastFormats[i].max_layers) { |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| // Simulcast stream width and height must both be dividable by |
| // |2 ^ simulcast_layers - 1|. |
| int NormalizeSimulcastSize(int size, size_t simulcast_layers) { |
| const int base2_exponent = static_cast<int>(simulcast_layers) - 1; |
| return ((size >> base2_exponent) << base2_exponent); |
| } |
| |
| size_t FindSimulcastMaxLayers(int width, int height) { |
| int index = FindSimulcastFormatIndex(width, height); |
| if (index == -1) { |
| return -1; |
| } |
| return kSimulcastFormats[index].max_layers; |
| } |
| |
| // TODO(marpan): Investigate if we should return 0 instead of -1 in |
| // FindSimulcast[Max/Target/Min]Bitrate functions below, since the |
| // codec struct max/min/targeBitrates are unsigned. |
| int FindSimulcastMaxBitrateBps(int width, int height) { |
| const int format_index = FindSimulcastFormatIndex(width, height); |
| if (format_index == -1) { |
| return -1; |
| } |
| return kSimulcastFormats[format_index].max_bitrate_kbps * 1000; |
| } |
| |
| int FindSimulcastTargetBitrateBps(int width, int height) { |
| const int format_index = FindSimulcastFormatIndex(width, height); |
| if (format_index == -1) { |
| return -1; |
| } |
| return kSimulcastFormats[format_index].target_bitrate_kbps * 1000; |
| } |
| |
| int FindSimulcastMinBitrateBps(int width, int height) { |
| const int format_index = FindSimulcastFormatIndex(width, height); |
| if (format_index == -1) { |
| return -1; |
| } |
| return kSimulcastFormats[format_index].min_bitrate_kbps * 1000; |
| } |
| |
| bool SlotSimulcastMaxResolution(size_t max_layers, int* width, int* height) { |
| int index = FindSimulcastFormatIndex(*width, *height, max_layers); |
| if (index == -1) { |
| LOG(LS_ERROR) << "SlotSimulcastMaxResolution"; |
| return false; |
| } |
| |
| *width = kSimulcastFormats[index].width; |
| *height = kSimulcastFormats[index].height; |
| LOG(LS_INFO) << "SlotSimulcastMaxResolution to width:" << *width |
| << " height:" << *height; |
| return true; |
| } |
| |
| int GetTotalMaxBitrateBps(const std::vector<webrtc::VideoStream>& streams) { |
| int total_max_bitrate_bps = 0; |
| for (size_t s = 0; s < streams.size() - 1; ++s) { |
| total_max_bitrate_bps += streams[s].target_bitrate_bps; |
| } |
| total_max_bitrate_bps += streams.back().max_bitrate_bps; |
| return total_max_bitrate_bps; |
| } |
| |
| std::vector<webrtc::VideoStream> GetSimulcastConfig(size_t max_streams, |
| int width, |
| int height, |
| int max_bitrate_bps, |
| int max_qp, |
| int max_framerate, |
| bool is_screencast) { |
| size_t num_simulcast_layers; |
| if (is_screencast) { |
| if (UseSimulcastScreenshare()) { |
| num_simulcast_layers = |
| std::min<int>(max_streams, kMaxScreenshareSimulcastStreams); |
| } else { |
| num_simulcast_layers = 1; |
| } |
| } else { |
| num_simulcast_layers = FindSimulcastMaxLayers(width, height); |
| } |
| |
| if (num_simulcast_layers > max_streams) { |
| // If the number of SSRCs in the group differs from our target |
| // number of simulcast streams for current resolution, switch down |
| // to a resolution that matches our number of SSRCs. |
| if (!SlotSimulcastMaxResolution(max_streams, &width, &height)) { |
| return std::vector<webrtc::VideoStream>(); |
| } |
| num_simulcast_layers = max_streams; |
| } |
| std::vector<webrtc::VideoStream> streams; |
| streams.resize(num_simulcast_layers); |
| |
| if (is_screencast) { |
| ScreenshareLayerConfig config = ScreenshareLayerConfig::GetDefault(); |
| // For legacy screenshare in conference mode, tl0 and tl1 bitrates are |
| // piggybacked on the VideoCodec struct as target and max bitrates, |
| // respectively. See eg. webrtc::VP8EncoderImpl::SetRates(). |
| streams[0].width = width; |
| streams[0].height = height; |
| streams[0].max_qp = max_qp; |
| streams[0].max_framerate = 5; |
| streams[0].min_bitrate_bps = kMinVideoBitrateKbps * 1000; |
| streams[0].target_bitrate_bps = config.tl0_bitrate_kbps * 1000; |
| streams[0].max_bitrate_bps = config.tl1_bitrate_kbps * 1000; |
| streams[0].temporal_layer_thresholds_bps.clear(); |
| streams[0].temporal_layer_thresholds_bps.push_back(config.tl0_bitrate_kbps * |
| 1000); |
| |
| // With simulcast enabled, add another spatial layer. This one will have a |
| // more normal layout, with the regular 3 temporal layer pattern and no fps |
| // restrictions. The base simulcast stream will still use legacy setup. |
| if (num_simulcast_layers == kMaxScreenshareSimulcastStreams) { |
| // Add optional upper simulcast layer. |
| // Lowest temporal layers of a 3 layer setup will have 40% of the total |
| // bitrate allocation for that stream. Make sure the gap between the |
| // target of the lower stream and first temporal layer of the higher one |
| // is at most 2x the bitrate, so that upswitching is not hampered by |
| // stalled bitrate estimates. |
| int max_bitrate_bps = 2 * ((streams[0].target_bitrate_bps * 10) / 4); |
| // Cap max bitrate so it isn't overly high for the given resolution. |
| max_bitrate_bps = std::min<int>( |
| max_bitrate_bps, FindSimulcastMaxBitrateBps(width, height)); |
| |
| streams[1].width = width; |
| streams[1].height = height; |
| streams[1].max_qp = max_qp; |
| streams[1].max_framerate = max_framerate; |
| // Three temporal layers means two thresholds. |
| streams[1].temporal_layer_thresholds_bps.resize(2); |
| streams[1].min_bitrate_bps = streams[0].target_bitrate_bps * 2; |
| streams[1].target_bitrate_bps = max_bitrate_bps; |
| streams[1].max_bitrate_bps = max_bitrate_bps; |
| } |
| } else { |
| // Format width and height has to be divisible by |2 ^ number_streams - 1|. |
| width = NormalizeSimulcastSize(width, num_simulcast_layers); |
| height = NormalizeSimulcastSize(height, num_simulcast_layers); |
| |
| // Add simulcast sub-streams from lower resolution to higher resolutions. |
| // Add simulcast streams, from highest resolution (|s| = number_streams -1) |
| // to lowest resolution at |s| = 0. |
| for (size_t s = num_simulcast_layers - 1;; --s) { |
| streams[s].width = width; |
| streams[s].height = height; |
| // TODO(pbos): Fill actual temporal-layer bitrate thresholds. |
| streams[s].max_qp = max_qp; |
| streams[s].temporal_layer_thresholds_bps.resize( |
| kDefaultConferenceNumberOfTemporalLayers[s] - 1); |
| streams[s].max_bitrate_bps = FindSimulcastMaxBitrateBps(width, height); |
| streams[s].target_bitrate_bps = |
| FindSimulcastTargetBitrateBps(width, height); |
| streams[s].min_bitrate_bps = FindSimulcastMinBitrateBps(width, height); |
| streams[s].max_framerate = max_framerate; |
| |
| width /= 2; |
| height /= 2; |
| |
| if (s == 0) |
| break; |
| } |
| |
| // Spend additional bits to boost the max stream. |
| int bitrate_left_bps = max_bitrate_bps - GetTotalMaxBitrateBps(streams); |
| if (bitrate_left_bps > 0) { |
| streams.back().max_bitrate_bps += bitrate_left_bps; |
| } |
| } |
| |
| return streams; |
| } |
| |
| static const int kScreenshareMinBitrateKbps = 50; |
| static const int kScreenshareMaxBitrateKbps = 6000; |
| static const int kScreenshareDefaultTl0BitrateKbps = 200; |
| static const int kScreenshareDefaultTl1BitrateKbps = 1000; |
| |
| static const char* kScreencastLayerFieldTrialName = |
| "WebRTC-ScreenshareLayerRates"; |
| static const char* kSimulcastScreenshareFieldTrialName = |
| "WebRTC-SimulcastScreenshare"; |
| |
| ScreenshareLayerConfig::ScreenshareLayerConfig(int tl0_bitrate, int tl1_bitrate) |
| : tl0_bitrate_kbps(tl0_bitrate), tl1_bitrate_kbps(tl1_bitrate) { |
| } |
| |
| ScreenshareLayerConfig ScreenshareLayerConfig::GetDefault() { |
| std::string group = |
| webrtc::field_trial::FindFullName(kScreencastLayerFieldTrialName); |
| |
| ScreenshareLayerConfig config(kScreenshareDefaultTl0BitrateKbps, |
| kScreenshareDefaultTl1BitrateKbps); |
| if (!group.empty() && !FromFieldTrialGroup(group, &config)) { |
| LOG(LS_WARNING) << "Unable to parse WebRTC-ScreenshareLayerRates" |
| " field trial group: '" << group << "'."; |
| } |
| return config; |
| } |
| |
| bool ScreenshareLayerConfig::FromFieldTrialGroup( |
| const std::string& group, |
| ScreenshareLayerConfig* config) { |
| // Parse field trial group name, containing bitrates for tl0 and tl1. |
| int tl0_bitrate; |
| int tl1_bitrate; |
| if (sscanf(group.c_str(), "%d-%d", &tl0_bitrate, &tl1_bitrate) != 2) { |
| return false; |
| } |
| |
| // Sanity check. |
| if (tl0_bitrate < kScreenshareMinBitrateKbps || |
| tl0_bitrate > kScreenshareMaxBitrateKbps || |
| tl1_bitrate < kScreenshareMinBitrateKbps || |
| tl1_bitrate > kScreenshareMaxBitrateKbps || tl0_bitrate > tl1_bitrate) { |
| return false; |
| } |
| |
| config->tl0_bitrate_kbps = tl0_bitrate; |
| config->tl1_bitrate_kbps = tl1_bitrate; |
| |
| return true; |
| } |
| |
| bool UseSimulcastScreenshare() { |
| return webrtc::field_trial::IsEnabled(kSimulcastScreenshareFieldTrialName); |
| } |
| |
| } // namespace cricket |