| /* |
| * Copyright (c) 2014 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include "modules/audio_coding/codecs/opus/audio_encoder_opus.h" |
| |
| #include <algorithm> |
| #include <iterator> |
| #include <memory> |
| #include <string> |
| #include <utility> |
| |
| #include "absl/strings/match.h" |
| #include "modules/audio_coding/audio_network_adaptor/audio_network_adaptor_impl.h" |
| #include "modules/audio_coding/audio_network_adaptor/controller_manager.h" |
| #include "modules/audio_coding/codecs/opus/audio_coder_opus_common.h" |
| #include "modules/audio_coding/codecs/opus/opus_interface.h" |
| #include "rtc_base/arraysize.h" |
| #include "rtc_base/checks.h" |
| #include "rtc_base/logging.h" |
| #include "rtc_base/numerics/exp_filter.h" |
| #include "rtc_base/numerics/safe_conversions.h" |
| #include "rtc_base/numerics/safe_minmax.h" |
| #include "rtc_base/string_encode.h" |
| #include "rtc_base/string_to_number.h" |
| #include "rtc_base/time_utils.h" |
| #include "system_wrappers/include/field_trial.h" |
| |
| namespace webrtc { |
| |
| namespace { |
| |
| // Codec parameters for Opus. |
| // draft-spittka-payload-rtp-opus-03 |
| |
| // Recommended bitrates: |
| // 8-12 kb/s for NB speech, |
| // 16-20 kb/s for WB speech, |
| // 28-40 kb/s for FB speech, |
| // 48-64 kb/s for FB mono music, and |
| // 64-128 kb/s for FB stereo music. |
| // The current implementation applies the following values to mono signals, |
| // and multiplies them by 2 for stereo. |
| constexpr int kOpusBitrateNbBps = 12000; |
| constexpr int kOpusBitrateWbBps = 20000; |
| constexpr int kOpusBitrateFbBps = 32000; |
| |
| constexpr int kRtpTimestampRateHz = 48000; |
| constexpr int kDefaultMaxPlaybackRate = 48000; |
| |
| // These two lists must be sorted from low to high |
| #if WEBRTC_OPUS_SUPPORT_120MS_PTIME |
| constexpr int kANASupportedFrameLengths[] = {20, 40, 60, 120}; |
| constexpr int kOpusSupportedFrameLengths[] = {10, 20, 40, 60, 120}; |
| #else |
| constexpr int kANASupportedFrameLengths[] = {20, 40, 60}; |
| constexpr int kOpusSupportedFrameLengths[] = {10, 20, 40, 60}; |
| #endif |
| |
| // PacketLossFractionSmoother uses an exponential filter with a time constant |
| // of -1.0 / ln(0.9999) = 10000 ms. |
| constexpr float kAlphaForPacketLossFractionSmoother = 0.9999f; |
| |
| // Optimize the loss rate to configure Opus. Basically, optimized loss rate is |
| // the input loss rate rounded down to various levels, because a robustly good |
| // audio quality is achieved by lowering the packet loss down. |
| // Additionally, to prevent toggling, margins are used, i.e., when jumping to |
| // a loss rate from below, a higher threshold is used than jumping to the same |
| // level from above. |
| float OptimizePacketLossRate(float new_loss_rate, float old_loss_rate) { |
| RTC_DCHECK_GE(new_loss_rate, 0.0f); |
| RTC_DCHECK_LE(new_loss_rate, 1.0f); |
| RTC_DCHECK_GE(old_loss_rate, 0.0f); |
| RTC_DCHECK_LE(old_loss_rate, 1.0f); |
| constexpr float kPacketLossRate20 = 0.20f; |
| constexpr float kPacketLossRate10 = 0.10f; |
| constexpr float kPacketLossRate5 = 0.05f; |
| constexpr float kPacketLossRate1 = 0.01f; |
| constexpr float kLossRate20Margin = 0.02f; |
| constexpr float kLossRate10Margin = 0.01f; |
| constexpr float kLossRate5Margin = 0.01f; |
| if (new_loss_rate >= |
| kPacketLossRate20 + |
| kLossRate20Margin * |
| (kPacketLossRate20 - old_loss_rate > 0 ? 1 : -1)) { |
| return kPacketLossRate20; |
| } else if (new_loss_rate >= |
| kPacketLossRate10 + |
| kLossRate10Margin * |
| (kPacketLossRate10 - old_loss_rate > 0 ? 1 : -1)) { |
| return kPacketLossRate10; |
| } else if (new_loss_rate >= |
| kPacketLossRate5 + |
| kLossRate5Margin * |
| (kPacketLossRate5 - old_loss_rate > 0 ? 1 : -1)) { |
| return kPacketLossRate5; |
| } else if (new_loss_rate >= kPacketLossRate1) { |
| return kPacketLossRate1; |
| } else { |
| return 0.0f; |
| } |
| } |
| |
| int CalculateDefaultBitrate(int max_playback_rate, size_t num_channels) { |
| const int bitrate = [&] { |
| if (max_playback_rate <= 8000) { |
| return kOpusBitrateNbBps * rtc::dchecked_cast<int>(num_channels); |
| } else if (max_playback_rate <= 16000) { |
| return kOpusBitrateWbBps * rtc::dchecked_cast<int>(num_channels); |
| } else { |
| return kOpusBitrateFbBps * rtc::dchecked_cast<int>(num_channels); |
| } |
| }(); |
| RTC_DCHECK_GE(bitrate, AudioEncoderOpusConfig::kMinBitrateBps); |
| RTC_DCHECK_LE(bitrate, AudioEncoderOpusConfig::kMaxBitrateBps); |
| return bitrate; |
| } |
| |
| // Get the maxaveragebitrate parameter in string-form, so we can properly figure |
| // out how invalid it is and accurately log invalid values. |
| int CalculateBitrate(int max_playback_rate_hz, |
| size_t num_channels, |
| absl::optional<std::string> bitrate_param) { |
| const int default_bitrate = |
| CalculateDefaultBitrate(max_playback_rate_hz, num_channels); |
| |
| if (bitrate_param) { |
| const auto bitrate = rtc::StringToNumber<int>(*bitrate_param); |
| if (bitrate) { |
| const int chosen_bitrate = |
| std::max(AudioEncoderOpusConfig::kMinBitrateBps, |
| std::min(*bitrate, AudioEncoderOpusConfig::kMaxBitrateBps)); |
| if (bitrate != chosen_bitrate) { |
| RTC_LOG(LS_WARNING) << "Invalid maxaveragebitrate " << *bitrate |
| << " clamped to " << chosen_bitrate; |
| } |
| return chosen_bitrate; |
| } |
| RTC_LOG(LS_WARNING) << "Invalid maxaveragebitrate \"" << *bitrate_param |
| << "\" replaced by default bitrate " << default_bitrate; |
| } |
| |
| return default_bitrate; |
| } |
| |
| int GetChannelCount(const SdpAudioFormat& format) { |
| const auto param = GetFormatParameter(format, "stereo"); |
| if (param == "1") { |
| return 2; |
| } else { |
| return 1; |
| } |
| } |
| |
| int GetMaxPlaybackRate(const SdpAudioFormat& format) { |
| const auto param = GetFormatParameter<int>(format, "maxplaybackrate"); |
| if (param && *param >= 8000) { |
| return std::min(*param, kDefaultMaxPlaybackRate); |
| } |
| return kDefaultMaxPlaybackRate; |
| } |
| |
| int GetFrameSizeMs(const SdpAudioFormat& format) { |
| const auto ptime = GetFormatParameter<int>(format, "ptime"); |
| if (ptime) { |
| // Pick the next highest supported frame length from |
| // kOpusSupportedFrameLengths. |
| for (const int supported_frame_length : kOpusSupportedFrameLengths) { |
| if (supported_frame_length >= *ptime) { |
| return supported_frame_length; |
| } |
| } |
| // If none was found, return the largest supported frame length. |
| return *(std::end(kOpusSupportedFrameLengths) - 1); |
| } |
| |
| return AudioEncoderOpusConfig::kDefaultFrameSizeMs; |
| } |
| |
| void FindSupportedFrameLengths(int min_frame_length_ms, |
| int max_frame_length_ms, |
| std::vector<int>* out) { |
| out->clear(); |
| std::copy_if(std::begin(kANASupportedFrameLengths), |
| std::end(kANASupportedFrameLengths), std::back_inserter(*out), |
| [&](int frame_length_ms) { |
| return frame_length_ms >= min_frame_length_ms && |
| frame_length_ms <= max_frame_length_ms; |
| }); |
| RTC_DCHECK(std::is_sorted(out->begin(), out->end())); |
| } |
| |
| int GetBitrateBps(const AudioEncoderOpusConfig& config) { |
| RTC_DCHECK(config.IsOk()); |
| return *config.bitrate_bps; |
| } |
| |
| bool IsValidPacketLossRate(int value) { |
| return value >= 0 && value <= 100; |
| } |
| |
| float ToFraction(int percent) { |
| return static_cast<float>(percent) / 100; |
| } |
| |
| float GetMinPacketLossRate() { |
| constexpr char kPacketLossFieldTrial[] = "WebRTC-Audio-OpusMinPacketLossRate"; |
| const bool use_opus_min_packet_loss_rate = |
| webrtc::field_trial::IsEnabled(kPacketLossFieldTrial); |
| if (use_opus_min_packet_loss_rate) { |
| const std::string field_trial_string = |
| webrtc::field_trial::FindFullName(kPacketLossFieldTrial); |
| constexpr int kDefaultMinPacketLossRate = 1; |
| int value = kDefaultMinPacketLossRate; |
| if (sscanf(field_trial_string.c_str(), "Enabled-%d", &value) == 1 && |
| !IsValidPacketLossRate(value)) { |
| RTC_LOG(LS_WARNING) << "Invalid parameter for " << kPacketLossFieldTrial |
| << ", using default value: " |
| << kDefaultMinPacketLossRate; |
| value = kDefaultMinPacketLossRate; |
| } |
| return ToFraction(value); |
| } |
| return 0.0; |
| } |
| |
| std::unique_ptr<AudioEncoderOpusImpl::NewPacketLossRateOptimizer> |
| GetNewPacketLossRateOptimizer() { |
| constexpr char kPacketLossOptimizationName[] = |
| "WebRTC-Audio-NewOpusPacketLossRateOptimization"; |
| const bool use_new_packet_loss_optimization = |
| webrtc::field_trial::IsEnabled(kPacketLossOptimizationName); |
| if (use_new_packet_loss_optimization) { |
| const std::string field_trial_string = |
| webrtc::field_trial::FindFullName(kPacketLossOptimizationName); |
| int min_rate; |
| int max_rate; |
| float slope; |
| if (sscanf(field_trial_string.c_str(), "Enabled-%d-%d-%f", &min_rate, |
| &max_rate, &slope) == 3 && |
| IsValidPacketLossRate(min_rate) && IsValidPacketLossRate(max_rate)) { |
| return std::make_unique<AudioEncoderOpusImpl::NewPacketLossRateOptimizer>( |
| ToFraction(min_rate), ToFraction(max_rate), slope); |
| } |
| RTC_LOG(LS_WARNING) << "Invalid parameters for " |
| << kPacketLossOptimizationName |
| << ", using default values."; |
| return std::make_unique<AudioEncoderOpusImpl::NewPacketLossRateOptimizer>(); |
| } |
| return nullptr; |
| } |
| |
| std::vector<float> GetBitrateMultipliers() { |
| constexpr char kBitrateMultipliersName[] = |
| "WebRTC-Audio-OpusBitrateMultipliers"; |
| const bool use_bitrate_multipliers = |
| webrtc::field_trial::IsEnabled(kBitrateMultipliersName); |
| if (use_bitrate_multipliers) { |
| const std::string field_trial_string = |
| webrtc::field_trial::FindFullName(kBitrateMultipliersName); |
| std::vector<std::string> pieces; |
| rtc::tokenize(field_trial_string, '-', &pieces); |
| if (pieces.size() < 2 || pieces[0] != "Enabled") { |
| RTC_LOG(LS_WARNING) << "Invalid parameters for " |
| << kBitrateMultipliersName |
| << ", not using custom values."; |
| return std::vector<float>(); |
| } |
| std::vector<float> multipliers(pieces.size() - 1); |
| for (size_t i = 1; i < pieces.size(); i++) { |
| if (!rtc::FromString(pieces[i], &multipliers[i - 1])) { |
| RTC_LOG(LS_WARNING) |
| << "Invalid parameters for " << kBitrateMultipliersName |
| << ", not using custom values."; |
| return std::vector<float>(); |
| } |
| } |
| RTC_LOG(LS_INFO) << "Using custom bitrate multipliers: " |
| << field_trial_string; |
| return multipliers; |
| } |
| return std::vector<float>(); |
| } |
| |
| int GetMultipliedBitrate(int bitrate, const std::vector<float>& multipliers) { |
| // The multipliers are valid from 5 kbps. |
| const size_t bitrate_kbps = static_cast<size_t>(bitrate / 1000); |
| if (bitrate_kbps < 5 || bitrate_kbps >= multipliers.size() + 5) { |
| return bitrate; |
| } |
| return static_cast<int>(multipliers[bitrate_kbps - 5] * bitrate); |
| } |
| } // namespace |
| |
| AudioEncoderOpusImpl::NewPacketLossRateOptimizer::NewPacketLossRateOptimizer( |
| float min_packet_loss_rate, |
| float max_packet_loss_rate, |
| float slope) |
| : min_packet_loss_rate_(min_packet_loss_rate), |
| max_packet_loss_rate_(max_packet_loss_rate), |
| slope_(slope) {} |
| |
| float AudioEncoderOpusImpl::NewPacketLossRateOptimizer::OptimizePacketLossRate( |
| float packet_loss_rate) const { |
| packet_loss_rate = slope_ * packet_loss_rate; |
| return std::min(std::max(packet_loss_rate, min_packet_loss_rate_), |
| max_packet_loss_rate_); |
| } |
| |
| void AudioEncoderOpusImpl::AppendSupportedEncoders( |
| std::vector<AudioCodecSpec>* specs) { |
| const SdpAudioFormat fmt = {"opus", |
| kRtpTimestampRateHz, |
| 2, |
| {{"minptime", "10"}, {"useinbandfec", "1"}}}; |
| const AudioCodecInfo info = QueryAudioEncoder(*SdpToConfig(fmt)); |
| specs->push_back({fmt, info}); |
| } |
| |
| AudioCodecInfo AudioEncoderOpusImpl::QueryAudioEncoder( |
| const AudioEncoderOpusConfig& config) { |
| RTC_DCHECK(config.IsOk()); |
| AudioCodecInfo info(config.sample_rate_hz, config.num_channels, |
| *config.bitrate_bps, |
| AudioEncoderOpusConfig::kMinBitrateBps, |
| AudioEncoderOpusConfig::kMaxBitrateBps); |
| info.allow_comfort_noise = false; |
| info.supports_network_adaption = true; |
| return info; |
| } |
| |
| std::unique_ptr<AudioEncoder> AudioEncoderOpusImpl::MakeAudioEncoder( |
| const AudioEncoderOpusConfig& config, |
| int payload_type) { |
| RTC_DCHECK(config.IsOk()); |
| return std::make_unique<AudioEncoderOpusImpl>(config, payload_type); |
| } |
| |
| absl::optional<AudioEncoderOpusConfig> AudioEncoderOpusImpl::SdpToConfig( |
| const SdpAudioFormat& format) { |
| if (!absl::EqualsIgnoreCase(format.name, "opus") || |
| format.clockrate_hz != kRtpTimestampRateHz || format.num_channels != 2) { |
| return absl::nullopt; |
| } |
| |
| AudioEncoderOpusConfig config; |
| config.num_channels = GetChannelCount(format); |
| config.frame_size_ms = GetFrameSizeMs(format); |
| config.max_playback_rate_hz = GetMaxPlaybackRate(format); |
| config.fec_enabled = (GetFormatParameter(format, "useinbandfec") == "1"); |
| config.dtx_enabled = (GetFormatParameter(format, "usedtx") == "1"); |
| config.cbr_enabled = (GetFormatParameter(format, "cbr") == "1"); |
| config.bitrate_bps = |
| CalculateBitrate(config.max_playback_rate_hz, config.num_channels, |
| GetFormatParameter(format, "maxaveragebitrate")); |
| config.application = config.num_channels == 1 |
| ? AudioEncoderOpusConfig::ApplicationMode::kVoip |
| : AudioEncoderOpusConfig::ApplicationMode::kAudio; |
| |
| constexpr int kMinANAFrameLength = kANASupportedFrameLengths[0]; |
| constexpr int kMaxANAFrameLength = |
| kANASupportedFrameLengths[arraysize(kANASupportedFrameLengths) - 1]; |
| |
| // For now, minptime and maxptime are only used with ANA. If ptime is outside |
| // of this range, it will get adjusted once ANA takes hold. Ideally, we'd know |
| // if ANA was to be used when setting up the config, and adjust accordingly. |
| const int min_frame_length_ms = |
| GetFormatParameter<int>(format, "minptime").value_or(kMinANAFrameLength); |
| const int max_frame_length_ms = |
| GetFormatParameter<int>(format, "maxptime").value_or(kMaxANAFrameLength); |
| |
| FindSupportedFrameLengths(min_frame_length_ms, max_frame_length_ms, |
| &config.supported_frame_lengths_ms); |
| RTC_DCHECK(config.IsOk()); |
| return config; |
| } |
| |
| absl::optional<int> AudioEncoderOpusImpl::GetNewComplexity( |
| const AudioEncoderOpusConfig& config) { |
| RTC_DCHECK(config.IsOk()); |
| const int bitrate_bps = GetBitrateBps(config); |
| if (bitrate_bps >= config.complexity_threshold_bps - |
| config.complexity_threshold_window_bps && |
| bitrate_bps <= config.complexity_threshold_bps + |
| config.complexity_threshold_window_bps) { |
| // Within the hysteresis window; make no change. |
| return absl::nullopt; |
| } else { |
| return bitrate_bps <= config.complexity_threshold_bps |
| ? config.low_rate_complexity |
| : config.complexity; |
| } |
| } |
| |
| absl::optional<int> AudioEncoderOpusImpl::GetNewBandwidth( |
| const AudioEncoderOpusConfig& config, |
| OpusEncInst* inst) { |
| constexpr int kMinWidebandBitrate = 8000; |
| constexpr int kMaxNarrowbandBitrate = 9000; |
| constexpr int kAutomaticThreshold = 11000; |
| RTC_DCHECK(config.IsOk()); |
| const int bitrate = GetBitrateBps(config); |
| if (bitrate > kAutomaticThreshold) { |
| return absl::optional<int>(OPUS_AUTO); |
| } |
| const int bandwidth = WebRtcOpus_GetBandwidth(inst); |
| RTC_DCHECK_GE(bandwidth, 0); |
| if (bitrate > kMaxNarrowbandBitrate && bandwidth < OPUS_BANDWIDTH_WIDEBAND) { |
| return absl::optional<int>(OPUS_BANDWIDTH_WIDEBAND); |
| } else if (bitrate < kMinWidebandBitrate && |
| bandwidth > OPUS_BANDWIDTH_NARROWBAND) { |
| return absl::optional<int>(OPUS_BANDWIDTH_NARROWBAND); |
| } |
| return absl::optional<int>(); |
| } |
| |
| class AudioEncoderOpusImpl::PacketLossFractionSmoother { |
| public: |
| explicit PacketLossFractionSmoother() |
| : last_sample_time_ms_(rtc::TimeMillis()), |
| smoother_(kAlphaForPacketLossFractionSmoother) {} |
| |
| // Gets the smoothed packet loss fraction. |
| float GetAverage() const { |
| float value = smoother_.filtered(); |
| return (value == rtc::ExpFilter::kValueUndefined) ? 0.0f : value; |
| } |
| |
| // Add new observation to the packet loss fraction smoother. |
| void AddSample(float packet_loss_fraction) { |
| int64_t now_ms = rtc::TimeMillis(); |
| smoother_.Apply(static_cast<float>(now_ms - last_sample_time_ms_), |
| packet_loss_fraction); |
| last_sample_time_ms_ = now_ms; |
| } |
| |
| private: |
| int64_t last_sample_time_ms_; |
| |
| // An exponential filter is used to smooth the packet loss fraction. |
| rtc::ExpFilter smoother_; |
| }; |
| |
| AudioEncoderOpusImpl::AudioEncoderOpusImpl(const AudioEncoderOpusConfig& config, |
| int payload_type) |
| : AudioEncoderOpusImpl( |
| config, |
| payload_type, |
| [this](const std::string& config_string, RtcEventLog* event_log) { |
| return DefaultAudioNetworkAdaptorCreator(config_string, event_log); |
| }, |
| // We choose 5sec as initial time constant due to empirical data. |
| std::make_unique<SmoothingFilterImpl>(5000)) {} |
| |
| AudioEncoderOpusImpl::AudioEncoderOpusImpl( |
| const AudioEncoderOpusConfig& config, |
| int payload_type, |
| const AudioNetworkAdaptorCreator& audio_network_adaptor_creator, |
| std::unique_ptr<SmoothingFilter> bitrate_smoother) |
| : payload_type_(payload_type), |
| send_side_bwe_with_overhead_( |
| webrtc::field_trial::IsEnabled("WebRTC-SendSideBwe-WithOverhead")), |
| use_stable_target_for_adaptation_(webrtc::field_trial::IsEnabled( |
| "WebRTC-Audio-StableTargetAdaptation")), |
| adjust_bandwidth_( |
| webrtc::field_trial::IsEnabled("WebRTC-AdjustOpusBandwidth")), |
| bitrate_changed_(true), |
| bitrate_multipliers_(GetBitrateMultipliers()), |
| packet_loss_rate_(0.0), |
| min_packet_loss_rate_(GetMinPacketLossRate()), |
| new_packet_loss_optimizer_(GetNewPacketLossRateOptimizer()), |
| inst_(nullptr), |
| packet_loss_fraction_smoother_(new PacketLossFractionSmoother()), |
| audio_network_adaptor_creator_(audio_network_adaptor_creator), |
| bitrate_smoother_(std::move(bitrate_smoother)), |
| consecutive_dtx_frames_(0) { |
| RTC_DCHECK(0 <= payload_type && payload_type <= 127); |
| |
| // Sanity check of the redundant payload type field that we want to get rid |
| // of. See https://bugs.chromium.org/p/webrtc/issues/detail?id=7847 |
| RTC_CHECK(config.payload_type == -1 || config.payload_type == payload_type); |
| |
| RTC_CHECK(RecreateEncoderInstance(config)); |
| SetProjectedPacketLossRate(packet_loss_rate_); |
| } |
| |
| AudioEncoderOpusImpl::AudioEncoderOpusImpl(int payload_type, |
| const SdpAudioFormat& format) |
| : AudioEncoderOpusImpl(*SdpToConfig(format), payload_type) {} |
| |
| AudioEncoderOpusImpl::~AudioEncoderOpusImpl() { |
| RTC_CHECK_EQ(0, WebRtcOpus_EncoderFree(inst_)); |
| } |
| |
| int AudioEncoderOpusImpl::SampleRateHz() const { |
| return config_.sample_rate_hz; |
| } |
| |
| size_t AudioEncoderOpusImpl::NumChannels() const { |
| return config_.num_channels; |
| } |
| |
| int AudioEncoderOpusImpl::RtpTimestampRateHz() const { |
| return kRtpTimestampRateHz; |
| } |
| |
| size_t AudioEncoderOpusImpl::Num10MsFramesInNextPacket() const { |
| return Num10msFramesPerPacket(); |
| } |
| |
| size_t AudioEncoderOpusImpl::Max10MsFramesInAPacket() const { |
| return Num10msFramesPerPacket(); |
| } |
| |
| int AudioEncoderOpusImpl::GetTargetBitrate() const { |
| return GetBitrateBps(config_); |
| } |
| |
| void AudioEncoderOpusImpl::Reset() { |
| RTC_CHECK(RecreateEncoderInstance(config_)); |
| } |
| |
| bool AudioEncoderOpusImpl::SetFec(bool enable) { |
| if (enable) { |
| RTC_CHECK_EQ(0, WebRtcOpus_EnableFec(inst_)); |
| } else { |
| RTC_CHECK_EQ(0, WebRtcOpus_DisableFec(inst_)); |
| } |
| config_.fec_enabled = enable; |
| return true; |
| } |
| |
| bool AudioEncoderOpusImpl::SetDtx(bool enable) { |
| if (enable) { |
| RTC_CHECK_EQ(0, WebRtcOpus_EnableDtx(inst_)); |
| } else { |
| RTC_CHECK_EQ(0, WebRtcOpus_DisableDtx(inst_)); |
| } |
| config_.dtx_enabled = enable; |
| return true; |
| } |
| |
| bool AudioEncoderOpusImpl::GetDtx() const { |
| return config_.dtx_enabled; |
| } |
| |
| bool AudioEncoderOpusImpl::SetApplication(Application application) { |
| auto conf = config_; |
| switch (application) { |
| case Application::kSpeech: |
| conf.application = AudioEncoderOpusConfig::ApplicationMode::kVoip; |
| break; |
| case Application::kAudio: |
| conf.application = AudioEncoderOpusConfig::ApplicationMode::kAudio; |
| break; |
| } |
| return RecreateEncoderInstance(conf); |
| } |
| |
| void AudioEncoderOpusImpl::SetMaxPlaybackRate(int frequency_hz) { |
| auto conf = config_; |
| conf.max_playback_rate_hz = frequency_hz; |
| RTC_CHECK(RecreateEncoderInstance(conf)); |
| } |
| |
| bool AudioEncoderOpusImpl::EnableAudioNetworkAdaptor( |
| const std::string& config_string, |
| RtcEventLog* event_log) { |
| audio_network_adaptor_ = |
| audio_network_adaptor_creator_(config_string, event_log); |
| return audio_network_adaptor_.get() != nullptr; |
| } |
| |
| void AudioEncoderOpusImpl::DisableAudioNetworkAdaptor() { |
| audio_network_adaptor_.reset(nullptr); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedUplinkPacketLossFraction( |
| float uplink_packet_loss_fraction) { |
| if (!audio_network_adaptor_) { |
| packet_loss_fraction_smoother_->AddSample(uplink_packet_loss_fraction); |
| float average_fraction_loss = packet_loss_fraction_smoother_->GetAverage(); |
| return SetProjectedPacketLossRate(average_fraction_loss); |
| } |
| audio_network_adaptor_->SetUplinkPacketLossFraction( |
| uplink_packet_loss_fraction); |
| ApplyAudioNetworkAdaptor(); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedTargetAudioBitrate( |
| int target_audio_bitrate_bps) { |
| SetTargetBitrate(target_audio_bitrate_bps); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedUplinkBandwidth( |
| int target_audio_bitrate_bps, |
| absl::optional<int64_t> bwe_period_ms, |
| absl::optional<int64_t> stable_target_bitrate_bps) { |
| if (audio_network_adaptor_) { |
| audio_network_adaptor_->SetTargetAudioBitrate(target_audio_bitrate_bps); |
| if (use_stable_target_for_adaptation_) { |
| if (stable_target_bitrate_bps) |
| audio_network_adaptor_->SetUplinkBandwidth(*stable_target_bitrate_bps); |
| } else { |
| // We give smoothed bitrate allocation to audio network adaptor as |
| // the uplink bandwidth. |
| // The BWE spikes should not affect the bitrate smoother more than 25%. |
| // To simplify the calculations we use a step response as input signal. |
| // The step response of an exponential filter is |
| // u(t) = 1 - e^(-t / time_constant). |
| // In order to limit the affect of a BWE spike within 25% of its value |
| // before |
| // the next BWE update, we would choose a time constant that fulfills |
| // 1 - e^(-bwe_period_ms / time_constant) < 0.25 |
| // Then 4 * bwe_period_ms is a good choice. |
| if (bwe_period_ms) |
| bitrate_smoother_->SetTimeConstantMs(*bwe_period_ms * 4); |
| bitrate_smoother_->AddSample(target_audio_bitrate_bps); |
| } |
| |
| ApplyAudioNetworkAdaptor(); |
| } else if (send_side_bwe_with_overhead_) { |
| if (!overhead_bytes_per_packet_) { |
| RTC_LOG(LS_INFO) |
| << "AudioEncoderOpusImpl: Overhead unknown, target audio bitrate " |
| << target_audio_bitrate_bps << " bps is ignored."; |
| return; |
| } |
| const int overhead_bps = static_cast<int>( |
| *overhead_bytes_per_packet_ * 8 * 100 / Num10MsFramesInNextPacket()); |
| SetTargetBitrate( |
| std::min(AudioEncoderOpusConfig::kMaxBitrateBps, |
| std::max(AudioEncoderOpusConfig::kMinBitrateBps, |
| target_audio_bitrate_bps - overhead_bps))); |
| } else { |
| SetTargetBitrate(target_audio_bitrate_bps); |
| } |
| } |
| void AudioEncoderOpusImpl::OnReceivedUplinkBandwidth( |
| int target_audio_bitrate_bps, |
| absl::optional<int64_t> bwe_period_ms) { |
| OnReceivedUplinkBandwidth(target_audio_bitrate_bps, bwe_period_ms, |
| absl::nullopt); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedUplinkAllocation( |
| BitrateAllocationUpdate update) { |
| OnReceivedUplinkBandwidth(update.target_bitrate.bps(), update.bwe_period.ms(), |
| update.stable_target_bitrate.bps()); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedRtt(int rtt_ms) { |
| if (!audio_network_adaptor_) |
| return; |
| audio_network_adaptor_->SetRtt(rtt_ms); |
| ApplyAudioNetworkAdaptor(); |
| } |
| |
| void AudioEncoderOpusImpl::OnReceivedOverhead( |
| size_t overhead_bytes_per_packet) { |
| if (audio_network_adaptor_) { |
| audio_network_adaptor_->SetOverhead(overhead_bytes_per_packet); |
| ApplyAudioNetworkAdaptor(); |
| } else { |
| overhead_bytes_per_packet_ = overhead_bytes_per_packet; |
| } |
| } |
| |
| void AudioEncoderOpusImpl::SetReceiverFrameLengthRange( |
| int min_frame_length_ms, |
| int max_frame_length_ms) { |
| // Ensure that |SetReceiverFrameLengthRange| is called before |
| // |EnableAudioNetworkAdaptor|, otherwise we need to recreate |
| // |audio_network_adaptor_|, which is not a needed use case. |
| RTC_DCHECK(!audio_network_adaptor_); |
| FindSupportedFrameLengths(min_frame_length_ms, max_frame_length_ms, |
| &config_.supported_frame_lengths_ms); |
| } |
| |
| AudioEncoder::EncodedInfo AudioEncoderOpusImpl::EncodeImpl( |
| uint32_t rtp_timestamp, |
| rtc::ArrayView<const int16_t> audio, |
| rtc::Buffer* encoded) { |
| MaybeUpdateUplinkBandwidth(); |
| |
| if (input_buffer_.empty()) |
| first_timestamp_in_buffer_ = rtp_timestamp; |
| |
| input_buffer_.insert(input_buffer_.end(), audio.cbegin(), audio.cend()); |
| if (input_buffer_.size() < |
| (Num10msFramesPerPacket() * SamplesPer10msFrame())) { |
| return EncodedInfo(); |
| } |
| RTC_CHECK_EQ(input_buffer_.size(), |
| Num10msFramesPerPacket() * SamplesPer10msFrame()); |
| |
| const size_t max_encoded_bytes = SufficientOutputBufferSize(); |
| EncodedInfo info; |
| info.encoded_bytes = encoded->AppendData( |
| max_encoded_bytes, [&](rtc::ArrayView<uint8_t> encoded) { |
| int status = WebRtcOpus_Encode( |
| inst_, &input_buffer_[0], |
| rtc::CheckedDivExact(input_buffer_.size(), config_.num_channels), |
| rtc::saturated_cast<int16_t>(max_encoded_bytes), encoded.data()); |
| |
| RTC_CHECK_GE(status, 0); // Fails only if fed invalid data. |
| |
| return static_cast<size_t>(status); |
| }); |
| input_buffer_.clear(); |
| |
| bool dtx_frame = (info.encoded_bytes <= 2); |
| |
| // Will use new packet size for next encoding. |
| config_.frame_size_ms = next_frame_length_ms_; |
| |
| if (adjust_bandwidth_ && bitrate_changed_) { |
| const auto bandwidth = GetNewBandwidth(config_, inst_); |
| if (bandwidth) { |
| RTC_CHECK_EQ(0, WebRtcOpus_SetBandwidth(inst_, *bandwidth)); |
| } |
| bitrate_changed_ = false; |
| } |
| |
| info.encoded_timestamp = first_timestamp_in_buffer_; |
| info.payload_type = payload_type_; |
| info.send_even_if_empty = true; // Allows Opus to send empty packets. |
| // After 20 DTX frames (MAX_CONSECUTIVE_DTX) Opus will send a frame |
| // coding the background noise. Avoid flagging this frame as speech |
| // (even though there is a probability of the frame being speech). |
| info.speech = !dtx_frame && (consecutive_dtx_frames_ != 20); |
| info.encoder_type = CodecType::kOpus; |
| |
| // Increase or reset DTX counter. |
| consecutive_dtx_frames_ = (dtx_frame) ? (consecutive_dtx_frames_ + 1) : (0); |
| |
| return info; |
| } |
| |
| size_t AudioEncoderOpusImpl::Num10msFramesPerPacket() const { |
| return static_cast<size_t>(rtc::CheckedDivExact(config_.frame_size_ms, 10)); |
| } |
| |
| size_t AudioEncoderOpusImpl::SamplesPer10msFrame() const { |
| return rtc::CheckedDivExact(config_.sample_rate_hz, 100) * |
| config_.num_channels; |
| } |
| |
| size_t AudioEncoderOpusImpl::SufficientOutputBufferSize() const { |
| // Calculate the number of bytes we expect the encoder to produce, |
| // then multiply by two to give a wide margin for error. |
| const size_t bytes_per_millisecond = |
| static_cast<size_t>(GetBitrateBps(config_) / (1000 * 8) + 1); |
| const size_t approx_encoded_bytes = |
| Num10msFramesPerPacket() * 10 * bytes_per_millisecond; |
| return 2 * approx_encoded_bytes; |
| } |
| |
| // If the given config is OK, recreate the Opus encoder instance with those |
| // settings, save the config, and return true. Otherwise, do nothing and return |
| // false. |
| bool AudioEncoderOpusImpl::RecreateEncoderInstance( |
| const AudioEncoderOpusConfig& config) { |
| if (!config.IsOk()) |
| return false; |
| config_ = config; |
| if (inst_) |
| RTC_CHECK_EQ(0, WebRtcOpus_EncoderFree(inst_)); |
| input_buffer_.clear(); |
| input_buffer_.reserve(Num10msFramesPerPacket() * SamplesPer10msFrame()); |
| RTC_CHECK_EQ(0, WebRtcOpus_EncoderCreate( |
| &inst_, config.num_channels, |
| config.application == |
| AudioEncoderOpusConfig::ApplicationMode::kVoip |
| ? 0 |
| : 1, |
| config.sample_rate_hz)); |
| const int bitrate = GetBitrateBps(config); |
| RTC_CHECK_EQ(0, WebRtcOpus_SetBitRate(inst_, bitrate)); |
| RTC_LOG(LS_VERBOSE) << "Set Opus bitrate to " << bitrate << " bps."; |
| if (config.fec_enabled) { |
| RTC_CHECK_EQ(0, WebRtcOpus_EnableFec(inst_)); |
| } else { |
| RTC_CHECK_EQ(0, WebRtcOpus_DisableFec(inst_)); |
| } |
| RTC_CHECK_EQ( |
| 0, WebRtcOpus_SetMaxPlaybackRate(inst_, config.max_playback_rate_hz)); |
| // Use the default complexity if the start bitrate is within the hysteresis |
| // window. |
| complexity_ = GetNewComplexity(config).value_or(config.complexity); |
| RTC_CHECK_EQ(0, WebRtcOpus_SetComplexity(inst_, complexity_)); |
| bitrate_changed_ = true; |
| if (config.dtx_enabled) { |
| RTC_CHECK_EQ(0, WebRtcOpus_EnableDtx(inst_)); |
| } else { |
| RTC_CHECK_EQ(0, WebRtcOpus_DisableDtx(inst_)); |
| } |
| RTC_CHECK_EQ(0, |
| WebRtcOpus_SetPacketLossRate( |
| inst_, static_cast<int32_t>(packet_loss_rate_ * 100 + .5))); |
| if (config.cbr_enabled) { |
| RTC_CHECK_EQ(0, WebRtcOpus_EnableCbr(inst_)); |
| } else { |
| RTC_CHECK_EQ(0, WebRtcOpus_DisableCbr(inst_)); |
| } |
| num_channels_to_encode_ = NumChannels(); |
| next_frame_length_ms_ = config_.frame_size_ms; |
| return true; |
| } |
| |
| void AudioEncoderOpusImpl::SetFrameLength(int frame_length_ms) { |
| next_frame_length_ms_ = frame_length_ms; |
| } |
| |
| void AudioEncoderOpusImpl::SetNumChannelsToEncode( |
| size_t num_channels_to_encode) { |
| RTC_DCHECK_GT(num_channels_to_encode, 0); |
| RTC_DCHECK_LE(num_channels_to_encode, config_.num_channels); |
| |
| if (num_channels_to_encode_ == num_channels_to_encode) |
| return; |
| |
| RTC_CHECK_EQ(0, WebRtcOpus_SetForceChannels(inst_, num_channels_to_encode)); |
| num_channels_to_encode_ = num_channels_to_encode; |
| } |
| |
| void AudioEncoderOpusImpl::SetProjectedPacketLossRate(float fraction) { |
| if (new_packet_loss_optimizer_) { |
| fraction = new_packet_loss_optimizer_->OptimizePacketLossRate(fraction); |
| } else { |
| fraction = OptimizePacketLossRate(fraction, packet_loss_rate_); |
| fraction = std::max(fraction, min_packet_loss_rate_); |
| } |
| if (packet_loss_rate_ != fraction) { |
| packet_loss_rate_ = fraction; |
| RTC_CHECK_EQ( |
| 0, WebRtcOpus_SetPacketLossRate( |
| inst_, static_cast<int32_t>(packet_loss_rate_ * 100 + .5))); |
| } |
| } |
| |
| void AudioEncoderOpusImpl::SetTargetBitrate(int bits_per_second) { |
| const int new_bitrate = rtc::SafeClamp<int>( |
| bits_per_second, AudioEncoderOpusConfig::kMinBitrateBps, |
| AudioEncoderOpusConfig::kMaxBitrateBps); |
| if (config_.bitrate_bps && *config_.bitrate_bps != new_bitrate) { |
| config_.bitrate_bps = new_bitrate; |
| RTC_DCHECK(config_.IsOk()); |
| const int bitrate = GetBitrateBps(config_); |
| RTC_CHECK_EQ( |
| 0, WebRtcOpus_SetBitRate( |
| inst_, GetMultipliedBitrate(bitrate, bitrate_multipliers_))); |
| RTC_LOG(LS_VERBOSE) << "Set Opus bitrate to " << bitrate << " bps."; |
| bitrate_changed_ = true; |
| } |
| |
| const auto new_complexity = GetNewComplexity(config_); |
| if (new_complexity && complexity_ != *new_complexity) { |
| complexity_ = *new_complexity; |
| RTC_CHECK_EQ(0, WebRtcOpus_SetComplexity(inst_, complexity_)); |
| } |
| } |
| |
| void AudioEncoderOpusImpl::ApplyAudioNetworkAdaptor() { |
| auto config = audio_network_adaptor_->GetEncoderRuntimeConfig(); |
| |
| if (config.bitrate_bps) |
| SetTargetBitrate(*config.bitrate_bps); |
| if (config.frame_length_ms) |
| SetFrameLength(*config.frame_length_ms); |
| if (config.enable_fec) |
| SetFec(*config.enable_fec); |
| if (config.uplink_packet_loss_fraction) |
| SetProjectedPacketLossRate(*config.uplink_packet_loss_fraction); |
| if (config.enable_dtx) |
| SetDtx(*config.enable_dtx); |
| if (config.num_channels) |
| SetNumChannelsToEncode(*config.num_channels); |
| } |
| |
| std::unique_ptr<AudioNetworkAdaptor> |
| AudioEncoderOpusImpl::DefaultAudioNetworkAdaptorCreator( |
| const std::string& config_string, |
| RtcEventLog* event_log) const { |
| AudioNetworkAdaptorImpl::Config config; |
| config.event_log = event_log; |
| return std::unique_ptr<AudioNetworkAdaptor>(new AudioNetworkAdaptorImpl( |
| config, ControllerManagerImpl::Create( |
| config_string, NumChannels(), supported_frame_lengths_ms(), |
| AudioEncoderOpusConfig::kMinBitrateBps, |
| num_channels_to_encode_, next_frame_length_ms_, |
| GetTargetBitrate(), config_.fec_enabled, GetDtx()))); |
| } |
| |
| void AudioEncoderOpusImpl::MaybeUpdateUplinkBandwidth() { |
| if (audio_network_adaptor_ && !use_stable_target_for_adaptation_) { |
| int64_t now_ms = rtc::TimeMillis(); |
| if (!bitrate_smoother_last_update_time_ || |
| now_ms - *bitrate_smoother_last_update_time_ >= |
| config_.uplink_bandwidth_update_interval_ms) { |
| absl::optional<float> smoothed_bitrate = bitrate_smoother_->GetAverage(); |
| if (smoothed_bitrate) |
| audio_network_adaptor_->SetUplinkBandwidth(*smoothed_bitrate); |
| bitrate_smoother_last_update_time_ = now_ms; |
| } |
| } |
| } |
| |
| ANAStats AudioEncoderOpusImpl::GetANAStats() const { |
| if (audio_network_adaptor_) { |
| return audio_network_adaptor_->GetStats(); |
| } |
| return ANAStats(); |
| } |
| |
| absl::optional<std::pair<TimeDelta, TimeDelta> > |
| AudioEncoderOpusImpl::GetFrameLengthRange() const { |
| if (config_.supported_frame_lengths_ms.empty()) { |
| return absl::nullopt; |
| } else if (audio_network_adaptor_) { |
| return {{TimeDelta::Millis(config_.supported_frame_lengths_ms.front()), |
| TimeDelta::Millis(config_.supported_frame_lengths_ms.back())}}; |
| } else { |
| return {{TimeDelta::Millis(config_.frame_size_ms), |
| TimeDelta::Millis(config_.frame_size_ms)}}; |
| } |
| } |
| |
| } // namespace webrtc |