blob: d43418b44a1f54ca2cd76370678ab73716acc950 [file] [log] [blame]
/*
* Copyright 2016 The WebRTC Project Authors. All rights reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#import <AVFoundation/AVFoundation.h>
#import <Foundation/Foundation.h>
#import "RTCMacros.h"
NS_ASSUME_NONNULL_BEGIN
extern NSString *const kRTCAudioSessionErrorDomain;
/** Method that requires lock was called without lock. */
extern NSInteger const kRTCAudioSessionErrorLockRequired;
/** Unknown configuration error occurred. */
extern NSInteger const kRTCAudioSessionErrorConfiguration;
@class RTCAudioSession;
@class RTCAudioSessionConfiguration;
// Surfaces AVAudioSession events. WebRTC will listen directly for notifications
// from AVAudioSession and handle them before calling these delegate methods,
// at which point applications can perform additional processing if required.
RTC_OBJC_EXPORT
@protocol RTCAudioSessionDelegate <NSObject>
@optional
/** Called on a system notification thread when AVAudioSession starts an
* interruption event.
*/
- (void)audioSessionDidBeginInterruption:(RTCAudioSession *)session;
/** Called on a system notification thread when AVAudioSession ends an
* interruption event.
*/
- (void)audioSessionDidEndInterruption:(RTCAudioSession *)session
shouldResumeSession:(BOOL)shouldResumeSession;
/** Called on a system notification thread when AVAudioSession changes the
* route.
*/
- (void)audioSessionDidChangeRoute:(RTCAudioSession *)session
reason:(AVAudioSessionRouteChangeReason)reason
previousRoute:(AVAudioSessionRouteDescription *)previousRoute;
/** Called on a system notification thread when AVAudioSession media server
* terminates.
*/
- (void)audioSessionMediaServerTerminated:(RTCAudioSession *)session;
/** Called on a system notification thread when AVAudioSession media server
* restarts.
*/
- (void)audioSessionMediaServerReset:(RTCAudioSession *)session;
// TODO(tkchin): Maybe handle SilenceSecondaryAudioHintNotification.
- (void)audioSession:(RTCAudioSession *)session didChangeCanPlayOrRecord:(BOOL)canPlayOrRecord;
/** Called on a WebRTC thread when the audio device is notified to begin
* playback or recording.
*/
- (void)audioSessionDidStartPlayOrRecord:(RTCAudioSession *)session;
/** Called on a WebRTC thread when the audio device is notified to stop
* playback or recording.
*/
- (void)audioSessionDidStopPlayOrRecord:(RTCAudioSession *)session;
/** Called when the AVAudioSession output volume value changes. */
- (void)audioSession:(RTCAudioSession *)audioSession didChangeOutputVolume:(float)outputVolume;
/** Called when the audio device detects a playout glitch. The argument is the
* number of glitches detected so far in the current audio playout session.
*/
- (void)audioSession:(RTCAudioSession *)audioSession
didDetectPlayoutGlitch:(int64_t)totalNumberOfGlitches;
/** Called when the audio session is about to change the active state.
*/
- (void)audioSession:(RTCAudioSession *)audioSession willSetActive:(BOOL)active;
/** Called after the audio session sucessfully changed the active state.
*/
- (void)audioSession:(RTCAudioSession *)audioSession didSetActive:(BOOL)active;
/** Called after the audio session failed to change the active state.
*/
- (void)audioSession:(RTCAudioSession *)audioSession
failedToSetActive:(BOOL)active
error:(NSError *)error;
@end
/** This is a protocol used to inform RTCAudioSession when the audio session
* activation state has changed outside of RTCAudioSession. The current known use
* case of this is when CallKit activates the audio session for the application
*/
RTC_OBJC_EXPORT
@protocol RTCAudioSessionActivationDelegate <NSObject>
/** Called when the audio session is activated outside of the app by iOS. */
- (void)audioSessionDidActivate:(AVAudioSession *)session;
/** Called when the audio session is deactivated outside of the app by iOS. */
- (void)audioSessionDidDeactivate:(AVAudioSession *)session;
@end
/** Proxy class for AVAudioSession that adds a locking mechanism similar to
* AVCaptureDevice. This is used to that interleaving configurations between
* WebRTC and the application layer are avoided.
*
* RTCAudioSession also coordinates activation so that the audio session is
* activated only once. See |setActive:error:|.
*/
RTC_OBJC_EXPORT
@interface RTCAudioSession : NSObject <RTCAudioSessionActivationDelegate>
/** Convenience property to access the AVAudioSession singleton. Callers should
* not call setters on AVAudioSession directly, but other method invocations
* are fine.
*/
@property(nonatomic, readonly) AVAudioSession *session;
/** Our best guess at whether the session is active based on results of calls to
* AVAudioSession.
*/
@property(nonatomic, readonly) BOOL isActive;
/** Whether RTCAudioSession is currently locked for configuration. */
@property(nonatomic, readonly) BOOL isLocked;
/** If YES, WebRTC will not initialize the audio unit automatically when an
* audio track is ready for playout or recording. Instead, applications should
* call setIsAudioEnabled. If NO, WebRTC will initialize the audio unit
* as soon as an audio track is ready for playout or recording.
*/
@property(nonatomic, assign) BOOL useManualAudio;
/** This property is only effective if useManualAudio is YES.
* Represents permission for WebRTC to initialize the VoIP audio unit.
* When set to NO, if the VoIP audio unit used by WebRTC is active, it will be
* stopped and uninitialized. This will stop incoming and outgoing audio.
* When set to YES, WebRTC will initialize and start the audio unit when it is
* needed (e.g. due to establishing an audio connection).
* This property was introduced to work around an issue where if an AVPlayer is
* playing audio while the VoIP audio unit is initialized, its audio would be
* either cut off completely or played at a reduced volume. By preventing
* the audio unit from being initialized until after the audio has completed,
* we are able to prevent the abrupt cutoff.
*/
@property(nonatomic, assign) BOOL isAudioEnabled;
// Proxy properties.
@property(readonly) NSString *category;
@property(readonly) AVAudioSessionCategoryOptions categoryOptions;
@property(readonly) NSString *mode;
@property(readonly) BOOL secondaryAudioShouldBeSilencedHint;
@property(readonly) AVAudioSessionRouteDescription *currentRoute;
@property(readonly) NSInteger maximumInputNumberOfChannels;
@property(readonly) NSInteger maximumOutputNumberOfChannels;
@property(readonly) float inputGain;
@property(readonly) BOOL inputGainSettable;
@property(readonly) BOOL inputAvailable;
@property(readonly, nullable) NSArray<AVAudioSessionDataSourceDescription *> *inputDataSources;
@property(readonly, nullable) AVAudioSessionDataSourceDescription *inputDataSource;
@property(readonly, nullable) NSArray<AVAudioSessionDataSourceDescription *> *outputDataSources;
@property(readonly, nullable) AVAudioSessionDataSourceDescription *outputDataSource;
@property(readonly) double sampleRate;
@property(readonly) double preferredSampleRate;
@property(readonly) NSInteger inputNumberOfChannels;
@property(readonly) NSInteger outputNumberOfChannels;
@property(readonly) float outputVolume;
@property(readonly) NSTimeInterval inputLatency;
@property(readonly) NSTimeInterval outputLatency;
@property(readonly) NSTimeInterval IOBufferDuration;
@property(readonly) NSTimeInterval preferredIOBufferDuration;
/** Default constructor. */
+ (instancetype)sharedInstance;
- (instancetype)init NS_UNAVAILABLE;
/** Adds a delegate, which is held weakly. */
- (void)addDelegate:(id<RTCAudioSessionDelegate>)delegate;
/** Removes an added delegate. */
- (void)removeDelegate:(id<RTCAudioSessionDelegate>)delegate;
/** Request exclusive access to the audio session for configuration. This call
* will block if the lock is held by another object.
*/
- (void)lockForConfiguration;
/** Relinquishes exclusive access to the audio session. */
- (void)unlockForConfiguration;
/** If |active|, activates the audio session if it isn't already active.
* Successful calls must be balanced with a setActive:NO when activation is no
* longer required. If not |active|, deactivates the audio session if one is
* active and this is the last balanced call. When deactivating, the
* AVAudioSessionSetActiveOptionNotifyOthersOnDeactivation option is passed to
* AVAudioSession.
*/
- (BOOL)setActive:(BOOL)active error:(NSError **)outError;
// The following methods are proxies for the associated methods on
// AVAudioSession. |lockForConfiguration| must be called before using them
// otherwise they will fail with kRTCAudioSessionErrorLockRequired.
- (BOOL)setCategory:(NSString *)category
withOptions:(AVAudioSessionCategoryOptions)options
error:(NSError **)outError;
- (BOOL)setMode:(NSString *)mode error:(NSError **)outError;
- (BOOL)setInputGain:(float)gain error:(NSError **)outError;
- (BOOL)setPreferredSampleRate:(double)sampleRate error:(NSError **)outError;
- (BOOL)setPreferredIOBufferDuration:(NSTimeInterval)duration error:(NSError **)outError;
- (BOOL)setPreferredInputNumberOfChannels:(NSInteger)count error:(NSError **)outError;
- (BOOL)setPreferredOutputNumberOfChannels:(NSInteger)count error:(NSError **)outError;
- (BOOL)overrideOutputAudioPort:(AVAudioSessionPortOverride)portOverride error:(NSError **)outError;
- (BOOL)setPreferredInput:(AVAudioSessionPortDescription *)inPort error:(NSError **)outError;
- (BOOL)setInputDataSource:(AVAudioSessionDataSourceDescription *)dataSource
error:(NSError **)outError;
- (BOOL)setOutputDataSource:(AVAudioSessionDataSourceDescription *)dataSource
error:(NSError **)outError;
@end
@interface RTCAudioSession (Configuration)
/** Applies the configuration to the current session. Attempts to set all
* properties even if previous ones fail. Only the last error will be
* returned.
* |lockForConfiguration| must be called first.
*/
- (BOOL)setConfiguration:(RTCAudioSessionConfiguration *)configuration error:(NSError **)outError;
/** Convenience method that calls both setConfiguration and setActive.
* |lockForConfiguration| must be called first.
*/
- (BOOL)setConfiguration:(RTCAudioSessionConfiguration *)configuration
active:(BOOL)active
error:(NSError **)outError;
@end
NS_ASSUME_NONNULL_END