talk/app/webrtc/datachannel.h

/*
 * libjingle
 * Copyright 2012 Google Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright notice,
 *     this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright notice,
 *     this list of conditions and the following disclaimer in the documentation
 *     and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
 * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef TALK_APP_WEBRTC_DATACHANNEL_H_
#define TALK_APP_WEBRTC_DATACHANNEL_H_

#include <deque>
#include <string>

#include "talk/app/webrtc/datachannelinterface.h"
#include "talk/app/webrtc/proxy.h"
#include "talk/media/base/mediachannel.h"
#include "talk/session/media/channel.h"
#include "webrtc/base/messagehandler.h"
#include "webrtc/base/scoped_ref_ptr.h"
#include "webrtc/base/sigslot.h"

namespace webrtc {

class DataChannel;

class DataChannelProviderInterface {
 public:
  // Sends the data to the transport.
  virtual bool SendData(const cricket::SendDataParams& params,
                        const rtc::Buffer& payload,
                        cricket::SendDataResult* result) = 0;
  // Connects to the transport signals.
  virtual bool ConnectDataChannel(DataChannel* data_channel) = 0;
  // Disconnects from the transport signals.
  virtual void DisconnectDataChannel(DataChannel* data_channel) = 0;
  // Adds the data channel SID to the transport for SCTP.
  virtual void AddSctpDataStream(int sid) = 0;
  // Removes the data channel SID from the transport for SCTP.
  virtual void RemoveSctpDataStream(int sid) = 0;
  // Returns true if the transport channel is ready to send data.
  virtual bool ReadyToSendData() const = 0;

 protected:
  virtual ~DataChannelProviderInterface() {}
};

struct InternalDataChannelInit : public DataChannelInit {
  enum OpenHandshakeRole {
    kOpener,
    kAcker,
    kNone
  };
  // The default role is kOpener because the default |negotiated| is false.
  InternalDataChannelInit() : open_handshake_role(kOpener) {}
  explicit InternalDataChannelInit(const DataChannelInit& base)
      : DataChannelInit(base), open_handshake_role(kOpener) {
    // If the channel is externally negotiated, do not send the OPEN message.
    if (base.negotiated) {
      open_handshake_role = kNone;
    }
  }

  OpenHandshakeRole open_handshake_role;
};

// DataChannel is a an implementation of the DataChannelInterface based on
// libjingle's data engine. It provides an implementation of unreliable or
// reliabledata channels. Currently this class is specifically designed to use
// both RtpDataEngine and SctpDataEngine.

// DataChannel states:
// kConnecting: The channel has been created the transport might not yet be
//              ready.
// kOpen: The channel have a local SSRC set by a call to UpdateSendSsrc
//        and a remote SSRC set by call to UpdateReceiveSsrc and the transport
//        has been writable once.
// kClosing: DataChannelInterface::Close has been called or UpdateReceiveSsrc
//           has been called with SSRC==0
// kClosed: Both UpdateReceiveSsrc and UpdateSendSsrc has been called with
//          SSRC==0.
class DataChannel : public DataChannelInterface,
                    public sigslot::has_slots<>,
                    public rtc::MessageHandler {
 public:
  static rtc::scoped_refptr<DataChannel> Create(
      DataChannelProviderInterface* provider,
      cricket::DataChannelType dct,
      const std::string& label,
      const InternalDataChannelInit& config);

  virtual void RegisterObserver(DataChannelObserver* observer);
  virtual void UnregisterObserver();

  virtual std::string label() const { return label_; }
  virtual bool reliable() const;
  virtual bool ordered() const { return config_.ordered; }
  virtual uint16 maxRetransmitTime() const {
    return config_.maxRetransmitTime;
  }
  virtual uint16 maxRetransmits() const {
    return config_.maxRetransmits;
  }
  virtual std::string protocol() const { return config_.protocol; }
  virtual bool negotiated() const { return config_.negotiated; }
  virtual int id() const { return config_.id; }
  virtual uint64 buffered_amount() const;
  virtual void Close();
  virtual DataState state() const { return state_; }
  virtual bool Send(const DataBuffer& buffer);

  // rtc::MessageHandler override.
  virtual void OnMessage(rtc::Message* msg);

  // Called if the underlying data engine is closing.
  void OnDataEngineClose();

  // Called when the channel's ready to use.  That can happen when the
  // underlying DataMediaChannel becomes ready, or when this channel is a new
  // stream on an existing DataMediaChannel, and we've finished negotiation.
  void OnChannelReady(bool writable);

  // Sigslots from cricket::DataChannel
  void OnDataReceived(cricket::DataChannel* channel,
                      const cricket::ReceiveDataParams& params,
                      const rtc::Buffer& payload);

  // The remote peer request that this channel should be closed.
  void RemotePeerRequestClose();

  // The following methods are for SCTP only.

  // Sets the SCTP sid and adds to transport layer if not set yet. Should only
  // be called once.
  void SetSctpSid(int sid);
  // Called when the transport channel is created.
  void OnTransportChannelCreated();

  // The following methods are for RTP only.

  // Set the SSRC this channel should use to send data on the
  // underlying data engine. |send_ssrc| == 0 means that the channel is no
  // longer part of the session negotiation.
  void SetSendSsrc(uint32 send_ssrc);
  // Set the SSRC this channel should use to receive data from the
  // underlying data engine.
  void SetReceiveSsrc(uint32 receive_ssrc);

  cricket::DataChannelType data_channel_type() const {
    return data_channel_type_;
  }

 protected:
  DataChannel(DataChannelProviderInterface* client,
              cricket::DataChannelType dct,
              const std::string& label);
  virtual ~DataChannel();

 private:
  // A packet queue which tracks the total queued bytes. Queued packets are
  // owned by this class.
  class PacketQueue {
   public:
    PacketQueue();
    ~PacketQueue();

    size_t byte_count() const {
      return byte_count_;
    }

    bool Empty() const;

    DataBuffer* Front();

    void Pop();

    void Push(DataBuffer* packet);

    void Clear();

    void Swap(PacketQueue* other);

   private:
    std::deque<DataBuffer*> packets_;
    size_t byte_count_;
  };

  // The OPEN(_ACK) signaling state.
  enum HandshakeState {
    kHandshakeInit,
    kHandshakeShouldSendOpen,
    kHandshakeShouldSendAck,
    kHandshakeWaitingForAck,
    kHandshakeReady
  };

  bool Init(const InternalDataChannelInit& config);
  void DoClose();
  void UpdateState();
  void SetState(DataState state);
  void DisconnectFromProvider();

  void DeliverQueuedReceivedData();

  void SendQueuedDataMessages();
  bool SendDataMessage(const DataBuffer& buffer, bool queue_if_blocked);
  bool QueueSendDataMessage(const DataBuffer& buffer);

  void SendQueuedControlMessages();
  void QueueControlMessage(const rtc::Buffer& buffer);
  bool SendControlMessage(const rtc::Buffer& buffer);

  std::string label_;
  InternalDataChannelInit config_;
  DataChannelObserver* observer_;
  DataState state_;
  cricket::DataChannelType data_channel_type_;
  DataChannelProviderInterface* provider_;
  HandshakeState handshake_state_;
  bool connected_to_provider_;
  bool send_ssrc_set_;
  bool receive_ssrc_set_;
  bool writable_;
  uint32 send_ssrc_;
  uint32 receive_ssrc_;
  // Control messages that always have to get sent out before any queued
  // data.
  PacketQueue queued_control_data_;
  PacketQueue queued_received_data_;
  PacketQueue queued_send_data_;
};

class DataChannelFactory {
 public:
  virtual rtc::scoped_refptr<DataChannel> CreateDataChannel(
      const std::string& label,
      const InternalDataChannelInit* config) = 0;

 protected:
  virtual ~DataChannelFactory() {}
};

// Define proxy for DataChannelInterface.
BEGIN_PROXY_MAP(DataChannel)
  PROXY_METHOD1(void, RegisterObserver, DataChannelObserver*)
  PROXY_METHOD0(void, UnregisterObserver)
  PROXY_CONSTMETHOD0(std::string, label)
  PROXY_CONSTMETHOD0(bool, reliable)
  PROXY_CONSTMETHOD0(bool, ordered)
  PROXY_CONSTMETHOD0(uint16, maxRetransmitTime)
  PROXY_CONSTMETHOD0(uint16, maxRetransmits)
  PROXY_CONSTMETHOD0(std::string, protocol)
  PROXY_CONSTMETHOD0(bool, negotiated)
  PROXY_CONSTMETHOD0(int, id)
  PROXY_CONSTMETHOD0(DataState, state)
  PROXY_CONSTMETHOD0(uint64, buffered_amount)
  PROXY_METHOD0(void, Close)
  PROXY_METHOD1(bool, Send, const DataBuffer&)
END_PROXY()

}  // namespace webrtc

#endif  // TALK_APP_WEBRTC_DATACHANNEL_H_