| /* |
| * Copyright (c) 2012 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #ifndef MODULES_AUDIO_CODING_CODECS_OPUS_OPUS_INTERFACE_H_ |
| #define MODULES_AUDIO_CODING_CODECS_OPUS_OPUS_INTERFACE_H_ |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| #include "modules/audio_coding/codecs/opus/opus_inst.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| // Opaque wrapper types for the codec state. |
| typedef struct WebRtcOpusEncInst OpusEncInst; |
| typedef struct WebRtcOpusDecInst OpusDecInst; |
| |
| /**************************************************************************** |
| * WebRtcOpus_EncoderCreate(...) |
| * |
| * This function creates an Opus encoder that encodes mono or stereo. |
| * |
| * Input: |
| * - channels : number of channels; 1 or 2. |
| * - application : 0 - VOIP applications. |
| * Favor speech intelligibility. |
| * 1 - Audio applications. |
| * Favor faithfulness to the original input. |
| * - sample_rate_hz : sample rate of input audio |
| * |
| * Output: |
| * - inst : a pointer to Encoder context that is created |
| * if success. |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_EncoderCreate(OpusEncInst** inst, |
| size_t channels, |
| int32_t application, |
| int sample_rate_hz); |
| |
| /**************************************************************************** |
| * WebRtcOpus_MultistreamEncoderCreate(...) |
| * |
| * This function creates an Opus encoder with any supported channel count. |
| * |
| * Input: |
| * - channels : number of channels in the input of the encoder. |
| * - application : 0 - VOIP applications. |
| * Favor speech intelligibility. |
| * 1 - Audio applications. |
| * Favor faithfulness to the original input. |
| * - streams : number of streams, as described in RFC 7845. |
| * - coupled_streams : number of coupled streams, as described in |
| * RFC 7845. |
| * - channel_mapping : the channel mapping; pointer to array of |
| * `channel` bytes, as described in RFC 7845. |
| * |
| * Output: |
| * - inst : a pointer to Encoder context that is created |
| * if success. |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_MultistreamEncoderCreate( |
| OpusEncInst** inst, |
| size_t channels, |
| int32_t application, |
| size_t streams, |
| size_t coupled_streams, |
| const unsigned char* channel_mapping); |
| |
| int16_t WebRtcOpus_EncoderFree(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_Encode(...) |
| * |
| * This function encodes audio as a series of Opus frames and inserts |
| * it into a packet. Input buffer can be any length. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - audio_in : Input speech data buffer |
| * - samples : Samples per channel in audio_in |
| * - length_encoded_buffer : Output buffer size |
| * |
| * Output: |
| * - encoded : Output compressed data buffer |
| * |
| * Return value : >=0 - Length (in bytes) of coded data |
| * -1 - Error |
| */ |
| int WebRtcOpus_Encode(OpusEncInst* inst, |
| const int16_t* audio_in, |
| size_t samples, |
| size_t length_encoded_buffer, |
| uint8_t* encoded); |
| |
| /**************************************************************************** |
| * WebRtcOpus_SetBitRate(...) |
| * |
| * This function adjusts the target bitrate of the encoder. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - rate : New target bitrate |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetBitRate(OpusEncInst* inst, int32_t rate); |
| |
| /**************************************************************************** |
| * WebRtcOpus_SetPacketLossRate(...) |
| * |
| * This function configures the encoder's expected packet loss percentage. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - loss_rate : loss percentage in the range 0-100, inclusive. |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetPacketLossRate(OpusEncInst* inst, int32_t loss_rate); |
| |
| /**************************************************************************** |
| * WebRtcOpus_SetMaxPlaybackRate(...) |
| * |
| * Configures the maximum playback rate for encoding. Due to hardware |
| * limitations, the receiver may render audio up to a playback rate. Opus |
| * encoder can use this information to optimize for network usage and encoding |
| * complexity. This will affect the audio bandwidth in the coded audio. However, |
| * the input/output sample rate is not affected. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - frequency_hz : Maximum playback rate in Hz. |
| * This parameter can take any value. The relation |
| * between the value and the Opus internal mode is |
| * as following: |
| * frequency_hz <= 8000 narrow band |
| * 8000 < frequency_hz <= 12000 medium band |
| * 12000 < frequency_hz <= 16000 wide band |
| * 16000 < frequency_hz <= 24000 super wide band |
| * frequency_hz > 24000 full band |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetMaxPlaybackRate(OpusEncInst* inst, int32_t frequency_hz); |
| |
| /**************************************************************************** |
| * WebRtcOpus_GetMaxPlaybackRate(...) |
| * |
| * Queries the maximum playback rate for encoding. If different single-stream |
| * encoders have different maximum playback rates, this function fails. |
| * |
| * Input: |
| * - inst : Encoder context. |
| * Output: |
| * - result_hz : The maximum playback rate in Hz. |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_GetMaxPlaybackRate(OpusEncInst* const inst, |
| int32_t* result_hz); |
| |
| /* TODO(minyue): Check whether an API to check the FEC and the packet loss rate |
| * is needed. It might not be very useful since there are not many use cases and |
| * the caller can always maintain the states. */ |
| |
| /**************************************************************************** |
| * WebRtcOpus_EnableFec() |
| * |
| * This function enables FEC for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_EnableFec(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DisableFec() |
| * |
| * This function disables FEC for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_DisableFec(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_EnableDtx() |
| * |
| * This function enables Opus internal DTX for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_EnableDtx(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DisableDtx() |
| * |
| * This function disables Opus internal DTX for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_DisableDtx(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_GetUseDtx() |
| * |
| * This function gets the DTX configuration used for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Encoder does not use DTX. |
| * 1 - Encoder uses DTX. |
| * -1 - Error. |
| */ |
| int16_t WebRtcOpus_GetUseDtx(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_EnableCbr() |
| * |
| * This function enables CBR for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_EnableCbr(OpusEncInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DisableCbr() |
| * |
| * This function disables CBR for encoding. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_DisableCbr(OpusEncInst* inst); |
| |
| /* |
| * WebRtcOpus_SetComplexity(...) |
| * |
| * This function adjusts the computational complexity. The effect is the same as |
| * calling the complexity setting of Opus as an Opus encoder related CTL. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - complexity : New target complexity (0-10, inclusive) |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetComplexity(OpusEncInst* inst, int32_t complexity); |
| |
| /* |
| * WebRtcOpus_GetBandwidth(...) |
| * |
| * This function returns the current bandwidth. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : Bandwidth - Success |
| * -1 - Error |
| */ |
| int32_t WebRtcOpus_GetBandwidth(OpusEncInst* inst); |
| |
| /* |
| * WebRtcOpus_SetBandwidth(...) |
| * |
| * By default Opus decides which bandwidth to encode the signal in depending on |
| * the the bitrate. This function overrules the previous setting and forces the |
| * encoder to encode in narrowband/wideband/fullband/etc. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - bandwidth : New target bandwidth. Valid values are: |
| * OPUS_BANDWIDTH_NARROWBAND |
| * OPUS_BANDWIDTH_MEDIUMBAND |
| * OPUS_BANDWIDTH_WIDEBAND |
| * OPUS_BANDWIDTH_SUPERWIDEBAND |
| * OPUS_BANDWIDTH_FULLBAND |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetBandwidth(OpusEncInst* inst, int32_t bandwidth); |
| |
| /* |
| * WebRtcOpus_GetInDtx(...) |
| * |
| * Gets the DTX state of the encoder. |
| * |
| * Input: |
| * - inst : Encoder context |
| * |
| * Return value : -1 - Error. |
| * 1 - Last encoded frame was comfort noise update during DTX. |
| * 0 - Last encoded frame was encoded with encoder not in DTX. |
| */ |
| int32_t WebRtcOpus_GetInDtx(OpusEncInst* inst); |
| |
| /* |
| * WebRtcOpus_SetForceChannels(...) |
| * |
| * If the encoder is initialized as a stereo encoder, Opus will by default |
| * decide whether to encode in mono or stereo based on the bitrate. This |
| * function overrules the previous setting, and forces the encoder to encode |
| * in auto/mono/stereo. |
| * |
| * If the Encoder is initialized as a mono encoder, and one tries to force |
| * stereo, the function will return an error. |
| * |
| * Input: |
| * - inst : Encoder context |
| * - num_channels : 0 - Not forced |
| * 1 - Mono |
| * 2 - Stereo |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_SetForceChannels(OpusEncInst* inst, size_t num_channels); |
| |
| int16_t WebRtcOpus_DecoderCreate(OpusDecInst** inst, |
| size_t channels, |
| int sample_rate_hz); |
| |
| /**************************************************************************** |
| * WebRtcOpus_MultistreamDecoderCreate(...) |
| * |
| * This function creates an Opus decoder with any supported channel count. |
| * |
| * Input: |
| * - channels : number of output channels that the decoder |
| * will produce. |
| * - streams : number of encoded streams, as described in |
| * RFC 7845. |
| * - coupled_streams : number of coupled streams, as described in |
| * RFC 7845. |
| * - channel_mapping : the channel mapping; pointer to array of |
| * `channel` bytes, as described in RFC 7845. |
| * |
| * Output: |
| * - inst : a pointer to a Decoder context that is created |
| * if success. |
| * |
| * Return value : 0 - Success |
| * -1 - Error |
| */ |
| int16_t WebRtcOpus_MultistreamDecoderCreate( |
| OpusDecInst** inst, |
| size_t channels, |
| size_t streams, |
| size_t coupled_streams, |
| const unsigned char* channel_mapping); |
| |
| int16_t WebRtcOpus_DecoderFree(OpusDecInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DecoderChannels(...) |
| * |
| * This function returns the number of channels created for Opus decoder. |
| */ |
| size_t WebRtcOpus_DecoderChannels(OpusDecInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DecoderInit(...) |
| * |
| * This function resets state of the decoder. |
| * |
| * Input: |
| * - inst : Decoder context |
| */ |
| void WebRtcOpus_DecoderInit(OpusDecInst* inst); |
| |
| /**************************************************************************** |
| * WebRtcOpus_Decode(...) |
| * |
| * This function decodes an Opus packet into one or more audio frames at the |
| * ACM interface's sampling rate (32 kHz). |
| * |
| * Input: |
| * - inst : Decoder context |
| * - encoded : Encoded data |
| * - encoded_bytes : Bytes in encoded vector |
| * |
| * Output: |
| * - decoded : The decoded vector |
| * - audio_type : 1 normal, 2 CNG (for Opus it should |
| * always return 1 since we're not using Opus's |
| * built-in DTX/CNG scheme) |
| * |
| * Return value : >0 - Samples per channel in decoded vector |
| * -1 - Error |
| */ |
| int WebRtcOpus_Decode(OpusDecInst* inst, |
| const uint8_t* encoded, |
| size_t encoded_bytes, |
| int16_t* decoded, |
| int16_t* audio_type); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DecodeFec(...) |
| * |
| * This function decodes the FEC data from an Opus packet into one or more audio |
| * frames at the ACM interface's sampling rate (32 kHz). |
| * |
| * Input: |
| * - inst : Decoder context |
| * - encoded : Encoded data |
| * - encoded_bytes : Bytes in encoded vector |
| * |
| * Output: |
| * - decoded : The decoded vector (previous frame) |
| * |
| * Return value : >0 - Samples per channel in decoded vector |
| * 0 - No FEC data in the packet |
| * -1 - Error |
| */ |
| int WebRtcOpus_DecodeFec(OpusDecInst* inst, |
| const uint8_t* encoded, |
| size_t encoded_bytes, |
| int16_t* decoded, |
| int16_t* audio_type); |
| |
| /**************************************************************************** |
| * WebRtcOpus_DurationEst(...) |
| * |
| * This function calculates the duration of an opus packet. |
| * Input: |
| * - inst : Decoder context |
| * - payload : Encoded data pointer |
| * - payload_length_bytes : Bytes of encoded data |
| * |
| * Return value : The duration of the packet, in samples per |
| * channel. |
| */ |
| int WebRtcOpus_DurationEst(OpusDecInst* inst, |
| const uint8_t* payload, |
| size_t payload_length_bytes); |
| |
| /**************************************************************************** |
| * WebRtcOpus_PlcDuration(...) |
| * |
| * This function calculates the duration of a frame returned by packet loss |
| * concealment (PLC). |
| * |
| * Input: |
| * - inst : Decoder context |
| * |
| * Return value : The duration of a frame returned by PLC, in |
| * samples per channel. |
| */ |
| int WebRtcOpus_PlcDuration(OpusDecInst* inst); |
| |
| /* TODO(minyue): Check whether it is needed to add a decoder context to the |
| * arguments, like WebRtcOpus_DurationEst(...). In fact, the packet itself tells |
| * the duration. The decoder context in WebRtcOpus_DurationEst(...) is not used. |
| * So it may be advisable to remove it from WebRtcOpus_DurationEst(...). */ |
| |
| /**************************************************************************** |
| * WebRtcOpus_FecDurationEst(...) |
| * |
| * This function calculates the duration of the FEC data within an opus packet. |
| * Input: |
| * - payload : Encoded data pointer |
| * - payload_length_bytes : Bytes of encoded data |
| * - sample_rate_hz : Sample rate of output audio |
| * |
| * Return value : >0 - The duration of the FEC data in the |
| * packet in samples per channel. |
| * 0 - No FEC data in the packet. |
| */ |
| int WebRtcOpus_FecDurationEst(const uint8_t* payload, |
| size_t payload_length_bytes, |
| int sample_rate_hz); |
| |
| /**************************************************************************** |
| * WebRtcOpus_PacketHasFec(...) |
| * |
| * This function detects if an opus packet has FEC. |
| * Input: |
| * - payload : Encoded data pointer |
| * - payload_length_bytes : Bytes of encoded data |
| * |
| * Return value : 0 - the packet does NOT contain FEC. |
| * 1 - the packet contains FEC. |
| */ |
| int WebRtcOpus_PacketHasFec(const uint8_t* payload, |
| size_t payload_length_bytes); |
| |
| /**************************************************************************** |
| * WebRtcOpus_PacketHasVoiceActivity(...) |
| * |
| * This function returns the SILK VAD information encoded in the opus packet. |
| * For CELT-only packets that do not have VAD information, it returns -1. |
| * Input: |
| * - payload : Encoded data pointer |
| * - payload_length_bytes : Bytes of encoded data |
| * |
| * Return value : 0 - no frame had the VAD flag set. |
| * 1 - at least one frame had the VAD flag set. |
| * -1 - VAD status could not be determined. |
| */ |
| int WebRtcOpus_PacketHasVoiceActivity(const uint8_t* payload, |
| size_t payload_length_bytes); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // MODULES_AUDIO_CODING_CODECS_OPUS_OPUS_INTERFACE_H_ |
