modules/pacing/task_queue_paced_sender.h

/*
 *  Copyright (c) 2019 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#ifndef MODULES_PACING_TASK_QUEUE_PACED_SENDER_H_
#define MODULES_PACING_TASK_QUEUE_PACED_SENDER_H_

#include <stddef.h>
#include <stdint.h>

#include <memory>
#include <vector>

#include "absl/types/optional.h"
#include "api/field_trials_view.h"
#include "api/sequence_checker.h"
#include "api/task_queue/pending_task_safety_flag.h"
#include "api/units/data_size.h"
#include "api/units/time_delta.h"
#include "api/units/timestamp.h"
#include "modules/pacing/pacing_controller.h"
#include "modules/pacing/rtp_packet_pacer.h"
#include "modules/rtp_rtcp/source/rtp_packet_to_send.h"
#include "rtc_base/experiments/field_trial_parser.h"
#include "rtc_base/numerics/exp_filter.h"
#include "rtc_base/thread_annotations.h"

namespace webrtc {
class Clock;

class TaskQueuePacedSender : public RtpPacketPacer, public RtpPacketSender {
 public:
  static const int kNoPacketHoldback;

  // The pacer can be configured using `field_trials` or specified parameters.
  //
  // The `hold_back_window` parameter sets a lower bound on time to sleep if
  // there is currently a pacer queue and packets can't immediately be
  // processed. Increasing this reduces thread wakeups at the expense of higher
  // latency.
  //
  // If the `burst_interval` parameter is set, the pacer is allowed to build up
  // a packet "debt" that correspond to approximately the send rate during the
  // specified interval. This greatly reduced wake ups by not pacing packets
  // within the allowed burst budget.
  //
  // The taskqueue used when constructing a TaskQueuePacedSender will also be
  // used for pacing.
  TaskQueuePacedSender(
      Clock* clock,
      PacingController::PacketSender* packet_sender,
      const FieldTrialsView& field_trials,
      TimeDelta max_hold_back_window,
      int max_hold_back_window_in_packets,
      absl::optional<TimeDelta> burst_interval = absl::nullopt);

  ~TaskQueuePacedSender() override;

  // Ensure that necessary delayed tasks are scheduled.
  void EnsureStarted();

  // Methods implementing RtpPacketSender.

  // Adds the packet to the queue and calls
  // PacingController::PacketSender::SendPacket() when it's time to send.
  void EnqueuePackets(
      std::vector<std::unique_ptr<RtpPacketToSend>> packets) override;
  // Remove any pending packets matching this SSRC from the packet queue.
  void RemovePacketsForSsrc(uint32_t ssrc) override;

  // Methods implementing RtpPacketPacer.

  void CreateProbeClusters(
      std::vector<ProbeClusterConfig> probe_cluster_configs) override;

  // Temporarily pause all sending.
  void Pause() override;

  // Resume sending packets.
  void Resume() override;

  void SetCongested(bool congested) override;

  // Sets the pacing rates. Must be called once before packets can be sent.
  void SetPacingRates(DataRate pacing_rate, DataRate padding_rate) override;

  // Currently audio traffic is not accounted for by pacer and passed through.
  // With the introduction of audio BWE, audio traffic will be accounted for
  // in the pacer budget calculation. The audio traffic will still be injected
  // at high priority.
  void SetAccountForAudioPackets(bool account_for_audio) override;

  void SetIncludeOverhead() override;
  void SetTransportOverhead(DataSize overhead_per_packet) override;

  // Returns the time since the oldest queued packet was enqueued.
  TimeDelta OldestPacketWaitTime() const override;

  // Returns total size of all packets in the pacer queue.
  DataSize QueueSizeData() const override;

  // Returns the time when the first packet was sent;
  absl::optional<Timestamp> FirstSentPacketTime() const override;

  // Returns the number of milliseconds it will take to send the current
  // packets in the queue, given the current size and bitrate, ignoring prio.
  TimeDelta ExpectedQueueTime() const override;

  // Set the max desired queuing delay, pacer will override the pacing rate
  // specified by SetPacingRates() if needed to achieve this goal.
  void SetQueueTimeLimit(TimeDelta limit) override;

 protected:
  // Exposed as protected for test.
  struct Stats {
    Stats()
        : oldest_packet_enqueue_time(Timestamp::MinusInfinity()),
          queue_size(DataSize::Zero()),
          expected_queue_time(TimeDelta::Zero()) {}
    Timestamp oldest_packet_enqueue_time;
    DataSize queue_size;
    TimeDelta expected_queue_time;
    absl::optional<Timestamp> first_sent_packet_time;
  };
  void OnStatsUpdated(const Stats& stats);

 private:
  // Call in response to state updates that could warrant sending out packets.
  // Protected against re-entry from packet sent receipts.
  void MaybeScheduleProcessPackets() RTC_RUN_ON(task_queue_);
  // Check if it is time to send packets, or schedule a delayed task if not.
  // Use Timestamp::MinusInfinity() to indicate that this call has _not_
  // been scheduled by the pacing controller. If this is the case, check if we
  // can execute immediately otherwise schedule a delay task that calls this
  // method again with desired (finite) scheduled process time.
  void MaybeProcessPackets(Timestamp scheduled_process_time);

  void UpdateStats() RTC_RUN_ON(task_queue_);
  Stats GetStats() const;

  Clock* const clock_;
  struct BurstyPacerFlags {
    // Parses `kBurstyPacerFieldTrial`. Example:
    // --force-fieldtrials=WebRTC-BurstyPacer/burst:20ms/
    explicit BurstyPacerFlags(const FieldTrialsView& field_trials);
    // If set, the pacer is allowed to build up a packet "debt" that correspond
    // to approximately the send rate during the specified interval.
    FieldTrialOptional<TimeDelta> burst;
  };
  const BurstyPacerFlags bursty_pacer_flags_;

  // The holdback window prevents too frequent delayed MaybeProcessPackets()
  // calls. These are only applicable if `allow_low_precision` is false.
  const TimeDelta max_hold_back_window_;
  const int max_hold_back_window_in_packets_;

  PacingController pacing_controller_ RTC_GUARDED_BY(task_queue_);

  // We want only one (valid) delayed process task in flight at a time.
  // If the value of `next_process_time_` is finite, it is an id for a
  // delayed task that will call MaybeProcessPackets() with that time
  // as parameter.
  // Timestamp::MinusInfinity() indicates no valid pending task.
  Timestamp next_process_time_ RTC_GUARDED_BY(task_queue_);

  // Indicates if this task queue is started. If not, don't allow
  // posting delayed tasks yet.
  bool is_started_ RTC_GUARDED_BY(task_queue_);

  // Indicates if this task queue is shutting down. If so, don't allow
  // posting any more delayed tasks as that can cause the task queue to
  // never drain.
  bool is_shutdown_ RTC_GUARDED_BY(task_queue_);

  // Filtered size of enqueued packets, in bytes.
  rtc::ExpFilter packet_size_ RTC_GUARDED_BY(task_queue_);
  bool include_overhead_ RTC_GUARDED_BY(task_queue_);

  Stats current_stats_ RTC_GUARDED_BY(task_queue_);
  // Protects against ProcessPackets reentry from packet sent receipts.
  bool processing_packets_ RTC_GUARDED_BY(task_queue_) = false;

  ScopedTaskSafety safety_;
  TaskQueueBase* task_queue_;
};
}  // namespace webrtc
#endif  // MODULES_PACING_TASK_QUEUE_PACED_SENDER_H_