| /* |
| * Copyright (c) 2011 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| /****************************************************************** |
| |
| iLBC Speech Coder ANSI-C Source Code |
| |
| WebRtcIlbcfix_EnhancerInterface.c |
| |
| ******************************************************************/ |
| |
| #include <string.h> |
| |
| #include "modules/audio_coding/codecs/ilbc/defines.h" |
| #include "modules/audio_coding/codecs/ilbc/constants.h" |
| #include "modules/audio_coding/codecs/ilbc/xcorr_coef.h" |
| #include "modules/audio_coding/codecs/ilbc/enhancer.h" |
| #include "modules/audio_coding/codecs/ilbc/hp_output.h" |
| |
| |
| |
| /*----------------------------------------------------------------* |
| * interface for enhancer |
| *---------------------------------------------------------------*/ |
| |
| size_t // (o) Estimated lag in end of in[] |
| WebRtcIlbcfix_EnhancerInterface( |
| int16_t* out, // (o) enhanced signal |
| const int16_t* in, // (i) unenhanced signal |
| IlbcDecoder* iLBCdec_inst) { // (i) buffers etc |
| size_t iblock; |
| size_t lag=20, tlag=20; |
| size_t inLen=iLBCdec_inst->blockl+120; |
| int16_t scale, scale1; |
| size_t plc_blockl; |
| int16_t *enh_buf; |
| size_t *enh_period; |
| int32_t tmp1, tmp2, max; |
| size_t new_blocks; |
| int16_t *enh_bufPtr1; |
| size_t i; |
| size_t k; |
| int16_t EnChange; |
| int16_t SqrtEnChange; |
| int16_t inc; |
| int16_t win; |
| int16_t *tmpW16ptr; |
| size_t startPos; |
| int16_t *plc_pred; |
| const int16_t *target, *regressor; |
| int16_t max16; |
| int shifts; |
| int32_t ener; |
| int16_t enerSh; |
| int16_t corrSh; |
| size_t ind; |
| int16_t sh; |
| size_t start, stop; |
| /* Stack based */ |
| int16_t totsh[3]; |
| int16_t downsampled[(BLOCKL_MAX+120)>>1]; /* length 180 */ |
| int32_t corr32[50]; |
| int32_t corrmax[3]; |
| int16_t corr16[3]; |
| int16_t en16[3]; |
| size_t lagmax[3]; |
| |
| plc_pred = downsampled; /* Reuse memory since plc_pred[ENH_BLOCKL] and |
| downsampled are non overlapping */ |
| enh_buf=iLBCdec_inst->enh_buf; |
| enh_period=iLBCdec_inst->enh_period; |
| |
| /* Copy in the new data into the enhancer buffer */ |
| memmove(enh_buf, &enh_buf[iLBCdec_inst->blockl], |
| (ENH_BUFL - iLBCdec_inst->blockl) * sizeof(*enh_buf)); |
| |
| WEBRTC_SPL_MEMCPY_W16(&enh_buf[ENH_BUFL-iLBCdec_inst->blockl], in, |
| iLBCdec_inst->blockl); |
| |
| /* Set variables that are dependent on frame size */ |
| if (iLBCdec_inst->mode==30) { |
| plc_blockl=ENH_BLOCKL; |
| new_blocks=3; |
| startPos=320; /* Start position for enhancement |
| (640-new_blocks*ENH_BLOCKL-80) */ |
| } else { |
| plc_blockl=40; |
| new_blocks=2; |
| startPos=440; /* Start position for enhancement |
| (640-new_blocks*ENH_BLOCKL-40) */ |
| } |
| |
| /* Update the pitch prediction for each enhancer block, move the old ones */ |
| memmove(enh_period, &enh_period[new_blocks], |
| (ENH_NBLOCKS_TOT - new_blocks) * sizeof(*enh_period)); |
| |
| WebRtcSpl_DownsampleFast( |
| enh_buf+ENH_BUFL-inLen, /* Input samples */ |
| inLen + ENH_BUFL_FILTEROVERHEAD, |
| downsampled, |
| inLen / 2, |
| (int16_t*)WebRtcIlbcfix_kLpFiltCoefs, /* Coefficients in Q12 */ |
| FILTERORDER_DS_PLUS1, /* Length of filter (order-1) */ |
| FACTOR_DS, |
| DELAY_DS); |
| |
| /* Estimate the pitch in the down sampled domain. */ |
| for(iblock = 0; iblock<new_blocks; iblock++){ |
| |
| /* references */ |
| target = downsampled + 60 + iblock * ENH_BLOCKL_HALF; |
| regressor = target - 10; |
| |
| /* scaling */ |
| max16 = WebRtcSpl_MaxAbsValueW16(®ressor[-50], ENH_BLOCKL_HALF + 50 - 1); |
| shifts = WebRtcSpl_GetSizeInBits((uint32_t)(max16 * max16)) - 25; |
| shifts = WEBRTC_SPL_MAX(0, shifts); |
| |
| /* compute cross correlation */ |
| WebRtcSpl_CrossCorrelation(corr32, target, regressor, ENH_BLOCKL_HALF, 50, |
| shifts, -1); |
| |
| /* Find 3 highest correlations that should be compared for the |
| highest (corr*corr)/ener */ |
| |
| for (i=0;i<2;i++) { |
| lagmax[i] = WebRtcSpl_MaxIndexW32(corr32, 50); |
| corrmax[i] = corr32[lagmax[i]]; |
| start = WEBRTC_SPL_MAX(2, lagmax[i]) - 2; |
| stop = WEBRTC_SPL_MIN(47, lagmax[i]) + 2; |
| for (k = start; k <= stop; k++) { |
| corr32[k] = 0; |
| } |
| } |
| lagmax[2] = WebRtcSpl_MaxIndexW32(corr32, 50); |
| corrmax[2] = corr32[lagmax[2]]; |
| |
| /* Calculate normalized corr^2 and ener */ |
| for (i=0;i<3;i++) { |
| corrSh = 15-WebRtcSpl_GetSizeInBits(corrmax[i]); |
| ener = WebRtcSpl_DotProductWithScale(regressor - lagmax[i], |
| regressor - lagmax[i], |
| ENH_BLOCKL_HALF, shifts); |
| enerSh = 15-WebRtcSpl_GetSizeInBits(ener); |
| corr16[i] = (int16_t)WEBRTC_SPL_SHIFT_W32(corrmax[i], corrSh); |
| corr16[i] = (int16_t)((corr16[i] * corr16[i]) >> 16); |
| en16[i] = (int16_t)WEBRTC_SPL_SHIFT_W32(ener, enerSh); |
| totsh[i] = enerSh - 2 * corrSh; |
| } |
| |
| /* Compare lagmax[0..3] for the (corr^2)/ener criteria */ |
| ind = 0; |
| for (i=1; i<3; i++) { |
| if (totsh[ind] > totsh[i]) { |
| sh = WEBRTC_SPL_MIN(31, totsh[ind]-totsh[i]); |
| if (corr16[ind] * en16[i] < (corr16[i] * en16[ind]) >> sh) { |
| ind = i; |
| } |
| } else { |
| sh = WEBRTC_SPL_MIN(31, totsh[i]-totsh[ind]); |
| if ((corr16[ind] * en16[i]) >> sh < corr16[i] * en16[ind]) { |
| ind = i; |
| } |
| } |
| } |
| |
| lag = lagmax[ind] + 10; |
| |
| /* Store the estimated lag in the non-downsampled domain */ |
| enh_period[ENH_NBLOCKS_TOT - new_blocks + iblock] = lag * 8; |
| |
| /* Store the estimated lag for backward PLC */ |
| if (iLBCdec_inst->prev_enh_pl==1) { |
| if (!iblock) { |
| tlag = lag * 2; |
| } |
| } else { |
| if (iblock==1) { |
| tlag = lag * 2; |
| } |
| } |
| |
| lag *= 2; |
| } |
| |
| if ((iLBCdec_inst->prev_enh_pl==1)||(iLBCdec_inst->prev_enh_pl==2)) { |
| |
| /* Calculate the best lag of the new frame |
| This is used to interpolate backwards and mix with the PLC'd data |
| */ |
| |
| /* references */ |
| target=in; |
| regressor=in+tlag-1; |
| |
| /* scaling */ |
| max16 = WebRtcSpl_MaxAbsValueW16(regressor, plc_blockl + 3 - 1); |
| if (max16>5000) |
| shifts=2; |
| else |
| shifts=0; |
| |
| /* compute cross correlation */ |
| WebRtcSpl_CrossCorrelation(corr32, target, regressor, plc_blockl, 3, shifts, |
| 1); |
| |
| /* find lag */ |
| lag=WebRtcSpl_MaxIndexW32(corr32, 3); |
| lag+=tlag-1; |
| |
| /* Copy the backward PLC to plc_pred */ |
| |
| if (iLBCdec_inst->prev_enh_pl==1) { |
| if (lag>plc_blockl) { |
| WEBRTC_SPL_MEMCPY_W16(plc_pred, &in[lag-plc_blockl], plc_blockl); |
| } else { |
| WEBRTC_SPL_MEMCPY_W16(&plc_pred[plc_blockl-lag], in, lag); |
| WEBRTC_SPL_MEMCPY_W16( |
| plc_pred, &enh_buf[ENH_BUFL-iLBCdec_inst->blockl-plc_blockl+lag], |
| (plc_blockl-lag)); |
| } |
| } else { |
| size_t pos; |
| |
| pos = plc_blockl; |
| |
| while (lag<pos) { |
| WEBRTC_SPL_MEMCPY_W16(&plc_pred[pos-lag], in, lag); |
| pos = pos - lag; |
| } |
| WEBRTC_SPL_MEMCPY_W16(plc_pred, &in[lag-pos], pos); |
| |
| } |
| |
| if (iLBCdec_inst->prev_enh_pl==1) { |
| /* limit energy change |
| if energy in backward PLC is more than 4 times higher than the forward |
| PLC, then reduce the energy in the backward PLC vector: |
| sample 1...len-16 set energy of the to 4 times forward PLC |
| sample len-15..len interpolate between 4 times fw PLC and bw PLC energy |
| |
| Note: Compared to floating point code there is a slight change, |
| the window is 16 samples long instead of 10 samples to simplify the |
| calculations |
| */ |
| |
| max=WebRtcSpl_MaxAbsValueW16( |
| &enh_buf[ENH_BUFL-iLBCdec_inst->blockl-plc_blockl], plc_blockl); |
| max16=WebRtcSpl_MaxAbsValueW16(plc_pred, plc_blockl); |
| max = WEBRTC_SPL_MAX(max, max16); |
| scale=22-(int16_t)WebRtcSpl_NormW32(max); |
| scale=WEBRTC_SPL_MAX(scale,0); |
| |
| tmp2 = WebRtcSpl_DotProductWithScale( |
| &enh_buf[ENH_BUFL-iLBCdec_inst->blockl-plc_blockl], |
| &enh_buf[ENH_BUFL-iLBCdec_inst->blockl-plc_blockl], |
| plc_blockl, scale); |
| tmp1 = WebRtcSpl_DotProductWithScale(plc_pred, plc_pred, |
| plc_blockl, scale); |
| |
| /* Check the energy difference */ |
| if ((tmp1>0)&&((tmp1>>2)>tmp2)) { |
| /* EnChange is now guaranteed to be <0.5 |
| Calculate EnChange=tmp2/tmp1 in Q16 |
| */ |
| |
| scale1=(int16_t)WebRtcSpl_NormW32(tmp1); |
| tmp1=WEBRTC_SPL_SHIFT_W32(tmp1, (scale1-16)); /* using 15 bits */ |
| |
| tmp2=WEBRTC_SPL_SHIFT_W32(tmp2, (scale1)); |
| EnChange = (int16_t)WebRtcSpl_DivW32W16(tmp2, |
| (int16_t)tmp1); |
| |
| /* Calculate the Sqrt of the energy in Q15 ((14+16)/2) */ |
| SqrtEnChange = (int16_t)WebRtcSpl_SqrtFloor(EnChange << 14); |
| |
| |
| /* Multiply first part of vector with 2*SqrtEnChange */ |
| WebRtcSpl_ScaleVector(plc_pred, plc_pred, SqrtEnChange, plc_blockl-16, |
| 14); |
| |
| /* Calculate increase parameter for window part (16 last samples) */ |
| /* (1-2*SqrtEnChange)/16 in Q15 */ |
| inc = 2048 - (SqrtEnChange >> 3); |
| |
| win=0; |
| tmpW16ptr=&plc_pred[plc_blockl-16]; |
| |
| for (i=16;i>0;i--) { |
| *tmpW16ptr = (int16_t)( |
| (*tmpW16ptr * (SqrtEnChange + (win >> 1))) >> 14); |
| /* multiply by (2.0*SqrtEnChange+win) */ |
| |
| win += inc; |
| tmpW16ptr++; |
| } |
| } |
| |
| /* Make the linear interpolation between the forward PLC'd data |
| and the backward PLC'd data (from the new frame) |
| */ |
| |
| if (plc_blockl==40) { |
| inc=400; /* 1/41 in Q14 */ |
| } else { /* plc_blockl==80 */ |
| inc=202; /* 1/81 in Q14 */ |
| } |
| win=0; |
| enh_bufPtr1=&enh_buf[ENH_BUFL-1-iLBCdec_inst->blockl]; |
| for (i=0; i<plc_blockl; i++) { |
| win+=inc; |
| *enh_bufPtr1 = (int16_t)((*enh_bufPtr1 * win) >> 14); |
| *enh_bufPtr1 += (int16_t)( |
| ((16384 - win) * plc_pred[plc_blockl - 1 - i]) >> 14); |
| enh_bufPtr1--; |
| } |
| } else { |
| int16_t *synt = &downsampled[LPC_FILTERORDER]; |
| |
| enh_bufPtr1=&enh_buf[ENH_BUFL-iLBCdec_inst->blockl-plc_blockl]; |
| WEBRTC_SPL_MEMCPY_W16(enh_bufPtr1, plc_pred, plc_blockl); |
| |
| /* Clear fileter memory */ |
| WebRtcSpl_MemSetW16(iLBCdec_inst->syntMem, 0, LPC_FILTERORDER); |
| WebRtcSpl_MemSetW16(iLBCdec_inst->hpimemy, 0, 4); |
| WebRtcSpl_MemSetW16(iLBCdec_inst->hpimemx, 0, 2); |
| |
| /* Initialize filter memory by filtering through 2 lags */ |
| WEBRTC_SPL_MEMCPY_W16(&synt[-LPC_FILTERORDER], iLBCdec_inst->syntMem, |
| LPC_FILTERORDER); |
| WebRtcSpl_FilterARFastQ12( |
| enh_bufPtr1, |
| synt, |
| &iLBCdec_inst->old_syntdenum[ |
| (iLBCdec_inst->nsub-1)*(LPC_FILTERORDER+1)], |
| LPC_FILTERORDER+1, lag); |
| |
| WEBRTC_SPL_MEMCPY_W16(&synt[-LPC_FILTERORDER], &synt[lag-LPC_FILTERORDER], |
| LPC_FILTERORDER); |
| WebRtcIlbcfix_HpOutput(synt, (int16_t*)WebRtcIlbcfix_kHpOutCoefs, |
| iLBCdec_inst->hpimemy, iLBCdec_inst->hpimemx, |
| lag); |
| WebRtcSpl_FilterARFastQ12( |
| enh_bufPtr1, synt, |
| &iLBCdec_inst->old_syntdenum[ |
| (iLBCdec_inst->nsub-1)*(LPC_FILTERORDER+1)], |
| LPC_FILTERORDER+1, lag); |
| |
| WEBRTC_SPL_MEMCPY_W16(iLBCdec_inst->syntMem, &synt[lag-LPC_FILTERORDER], |
| LPC_FILTERORDER); |
| WebRtcIlbcfix_HpOutput(synt, (int16_t*)WebRtcIlbcfix_kHpOutCoefs, |
| iLBCdec_inst->hpimemy, iLBCdec_inst->hpimemx, |
| lag); |
| } |
| } |
| |
| |
| /* Perform enhancement block by block */ |
| |
| for (iblock = 0; iblock<new_blocks; iblock++) { |
| WebRtcIlbcfix_Enhancer(out + iblock * ENH_BLOCKL, |
| enh_buf, |
| ENH_BUFL, |
| iblock * ENH_BLOCKL + startPos, |
| enh_period, |
| WebRtcIlbcfix_kEnhPlocs, ENH_NBLOCKS_TOT); |
| } |
| |
| return (lag); |
| } |