| /* |
| * Copyright 2011 The WebRTC Project Authors. All rights reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <algorithm> |
| #include <vector> |
| |
| #include "webrtc/p2p/base/pseudotcp.h" |
| #include "webrtc/base/gunit.h" |
| #include "webrtc/base/helpers.h" |
| #include "webrtc/base/messagehandler.h" |
| #include "webrtc/base/stream.h" |
| #include "webrtc/base/thread.h" |
| #include "webrtc/base/timeutils.h" |
| |
| using cricket::PseudoTcp; |
| |
| static const int kConnectTimeoutMs = 10000; // ~3 * default RTO of 3000ms |
| static const int kTransferTimeoutMs = 15000; |
| static const int kBlockSize = 4096; |
| |
| class PseudoTcpForTest : public cricket::PseudoTcp { |
| public: |
| PseudoTcpForTest(cricket::IPseudoTcpNotify* notify, uint32 conv) |
| : PseudoTcp(notify, conv) { |
| } |
| |
| bool isReceiveBufferFull() const { |
| return PseudoTcp::isReceiveBufferFull(); |
| } |
| |
| void disableWindowScale() { |
| PseudoTcp::disableWindowScale(); |
| } |
| }; |
| |
| class PseudoTcpTestBase : public testing::Test, |
| public rtc::MessageHandler, |
| public cricket::IPseudoTcpNotify { |
| public: |
| PseudoTcpTestBase() |
| : local_(this, 1), |
| remote_(this, 1), |
| have_connected_(false), |
| have_disconnected_(false), |
| local_mtu_(65535), |
| remote_mtu_(65535), |
| delay_(0), |
| loss_(0) { |
| // Set use of the test RNG to get predictable loss patterns. |
| rtc::SetRandomTestMode(true); |
| } |
| ~PseudoTcpTestBase() { |
| // Put it back for the next test. |
| rtc::SetRandomTestMode(false); |
| } |
| void SetLocalMtu(int mtu) { |
| local_.NotifyMTU(mtu); |
| local_mtu_ = mtu; |
| } |
| void SetRemoteMtu(int mtu) { |
| remote_.NotifyMTU(mtu); |
| remote_mtu_ = mtu; |
| } |
| void SetDelay(int delay) { |
| delay_ = delay; |
| } |
| void SetLoss(int percent) { |
| loss_ = percent; |
| } |
| void SetOptNagling(bool enable_nagles) { |
| local_.SetOption(PseudoTcp::OPT_NODELAY, !enable_nagles); |
| remote_.SetOption(PseudoTcp::OPT_NODELAY, !enable_nagles); |
| } |
| void SetOptAckDelay(int ack_delay) { |
| local_.SetOption(PseudoTcp::OPT_ACKDELAY, ack_delay); |
| remote_.SetOption(PseudoTcp::OPT_ACKDELAY, ack_delay); |
| } |
| void SetOptSndBuf(int size) { |
| local_.SetOption(PseudoTcp::OPT_SNDBUF, size); |
| remote_.SetOption(PseudoTcp::OPT_SNDBUF, size); |
| } |
| void SetRemoteOptRcvBuf(int size) { |
| remote_.SetOption(PseudoTcp::OPT_RCVBUF, size); |
| } |
| void SetLocalOptRcvBuf(int size) { |
| local_.SetOption(PseudoTcp::OPT_RCVBUF, size); |
| } |
| void DisableRemoteWindowScale() { |
| remote_.disableWindowScale(); |
| } |
| void DisableLocalWindowScale() { |
| local_.disableWindowScale(); |
| } |
| |
| protected: |
| int Connect() { |
| int ret = local_.Connect(); |
| if (ret == 0) { |
| UpdateLocalClock(); |
| } |
| return ret; |
| } |
| void Close() { |
| local_.Close(false); |
| UpdateLocalClock(); |
| } |
| |
| enum { MSG_LPACKET, MSG_RPACKET, MSG_LCLOCK, MSG_RCLOCK, MSG_IOCOMPLETE, |
| MSG_WRITE}; |
| virtual void OnTcpOpen(PseudoTcp* tcp) { |
| // Consider ourselves connected when the local side gets OnTcpOpen. |
| // OnTcpWriteable isn't fired at open, so we trigger it now. |
| LOG(LS_VERBOSE) << "Opened"; |
| if (tcp == &local_) { |
| have_connected_ = true; |
| OnTcpWriteable(tcp); |
| } |
| } |
| // Test derived from the base should override |
| // virtual void OnTcpReadable(PseudoTcp* tcp) |
| // and |
| // virtual void OnTcpWritable(PseudoTcp* tcp) |
| virtual void OnTcpClosed(PseudoTcp* tcp, uint32 error) { |
| // Consider ourselves closed when the remote side gets OnTcpClosed. |
| // TODO: OnTcpClosed is only ever notified in case of error in |
| // the current implementation. Solicited close is not (yet) supported. |
| LOG(LS_VERBOSE) << "Closed"; |
| EXPECT_EQ(0U, error); |
| if (tcp == &remote_) { |
| have_disconnected_ = true; |
| } |
| } |
| virtual WriteResult TcpWritePacket(PseudoTcp* tcp, |
| const char* buffer, size_t len) { |
| // Randomly drop the desired percentage of packets. |
| // Also drop packets that are larger than the configured MTU. |
| if (rtc::CreateRandomId() % 100 < static_cast<uint32>(loss_)) { |
| LOG(LS_VERBOSE) << "Randomly dropping packet, size=" << len; |
| } else if (len > static_cast<size_t>(std::min(local_mtu_, remote_mtu_))) { |
| LOG(LS_VERBOSE) << "Dropping packet that exceeds path MTU, size=" << len; |
| } else { |
| int id = (tcp == &local_) ? MSG_RPACKET : MSG_LPACKET; |
| std::string packet(buffer, len); |
| rtc::Thread::Current()->PostDelayed(delay_, this, id, |
| rtc::WrapMessageData(packet)); |
| } |
| return WR_SUCCESS; |
| } |
| |
| void UpdateLocalClock() { UpdateClock(&local_, MSG_LCLOCK); } |
| void UpdateRemoteClock() { UpdateClock(&remote_, MSG_RCLOCK); } |
| void UpdateClock(PseudoTcp* tcp, uint32 message) { |
| long interval = 0; // NOLINT |
| tcp->GetNextClock(PseudoTcp::Now(), interval); |
| interval = std::max<int>(interval, 0L); // sometimes interval is < 0 |
| rtc::Thread::Current()->Clear(this, message); |
| rtc::Thread::Current()->PostDelayed(interval, this, message); |
| } |
| |
| virtual void OnMessage(rtc::Message* message) { |
| switch (message->message_id) { |
| case MSG_LPACKET: { |
| const std::string& s( |
| rtc::UseMessageData<std::string>(message->pdata)); |
| local_.NotifyPacket(s.c_str(), s.size()); |
| UpdateLocalClock(); |
| break; |
| } |
| case MSG_RPACKET: { |
| const std::string& s( |
| rtc::UseMessageData<std::string>(message->pdata)); |
| remote_.NotifyPacket(s.c_str(), s.size()); |
| UpdateRemoteClock(); |
| break; |
| } |
| case MSG_LCLOCK: |
| local_.NotifyClock(PseudoTcp::Now()); |
| UpdateLocalClock(); |
| break; |
| case MSG_RCLOCK: |
| remote_.NotifyClock(PseudoTcp::Now()); |
| UpdateRemoteClock(); |
| break; |
| default: |
| break; |
| } |
| delete message->pdata; |
| } |
| |
| PseudoTcpForTest local_; |
| PseudoTcpForTest remote_; |
| rtc::MemoryStream send_stream_; |
| rtc::MemoryStream recv_stream_; |
| bool have_connected_; |
| bool have_disconnected_; |
| int local_mtu_; |
| int remote_mtu_; |
| int delay_; |
| int loss_; |
| }; |
| |
| class PseudoTcpTest : public PseudoTcpTestBase { |
| public: |
| void TestTransfer(int size) { |
| uint32 start, elapsed; |
| size_t received; |
| // Create some dummy data to send. |
| send_stream_.ReserveSize(size); |
| for (int i = 0; i < size; ++i) { |
| char ch = static_cast<char>(i); |
| send_stream_.Write(&ch, 1, NULL, NULL); |
| } |
| send_stream_.Rewind(); |
| // Prepare the receive stream. |
| recv_stream_.ReserveSize(size); |
| // Connect and wait until connected. |
| start = rtc::Time(); |
| EXPECT_EQ(0, Connect()); |
| EXPECT_TRUE_WAIT(have_connected_, kConnectTimeoutMs); |
| // Sending will start from OnTcpWriteable and complete when all data has |
| // been received. |
| EXPECT_TRUE_WAIT(have_disconnected_, kTransferTimeoutMs); |
| elapsed = rtc::TimeSince(start); |
| recv_stream_.GetSize(&received); |
| // Ensure we closed down OK and we got the right data. |
| // TODO: Ensure the errors are cleared properly. |
| //EXPECT_EQ(0, local_.GetError()); |
| //EXPECT_EQ(0, remote_.GetError()); |
| EXPECT_EQ(static_cast<size_t>(size), received); |
| EXPECT_EQ(0, memcmp(send_stream_.GetBuffer(), |
| recv_stream_.GetBuffer(), size)); |
| LOG(LS_INFO) << "Transferred " << received << " bytes in " << elapsed |
| << " ms (" << size * 8 / elapsed << " Kbps)"; |
| } |
| |
| private: |
| // IPseudoTcpNotify interface |
| |
| virtual void OnTcpReadable(PseudoTcp* tcp) { |
| // Stream bytes to the recv stream as they arrive. |
| if (tcp == &remote_) { |
| ReadData(); |
| |
| // TODO: OnTcpClosed() is currently only notified on error - |
| // there is no on-the-wire equivalent of TCP FIN. |
| // So we fake the notification when all the data has been read. |
| size_t received, required; |
| recv_stream_.GetPosition(&received); |
| send_stream_.GetSize(&required); |
| if (received == required) |
| OnTcpClosed(&remote_, 0); |
| } |
| } |
| virtual void OnTcpWriteable(PseudoTcp* tcp) { |
| // Write bytes from the send stream when we can. |
| // Shut down when we've sent everything. |
| if (tcp == &local_) { |
| LOG(LS_VERBOSE) << "Flow Control Lifted"; |
| bool done; |
| WriteData(&done); |
| if (done) { |
| Close(); |
| } |
| } |
| } |
| |
| void ReadData() { |
| char block[kBlockSize]; |
| size_t position; |
| int rcvd; |
| do { |
| rcvd = remote_.Recv(block, sizeof(block)); |
| if (rcvd != -1) { |
| recv_stream_.Write(block, rcvd, NULL, NULL); |
| recv_stream_.GetPosition(&position); |
| LOG(LS_VERBOSE) << "Received: " << position; |
| } |
| } while (rcvd > 0); |
| } |
| void WriteData(bool* done) { |
| size_t position, tosend; |
| int sent; |
| char block[kBlockSize]; |
| do { |
| send_stream_.GetPosition(&position); |
| if (send_stream_.Read(block, sizeof(block), &tosend, NULL) != |
| rtc::SR_EOS) { |
| sent = local_.Send(block, tosend); |
| UpdateLocalClock(); |
| if (sent != -1) { |
| send_stream_.SetPosition(position + sent); |
| LOG(LS_VERBOSE) << "Sent: " << position + sent; |
| } else { |
| send_stream_.SetPosition(position); |
| LOG(LS_VERBOSE) << "Flow Controlled"; |
| } |
| } else { |
| sent = static_cast<int>(tosend = 0); |
| } |
| } while (sent > 0); |
| *done = (tosend == 0); |
| } |
| |
| private: |
| rtc::MemoryStream send_stream_; |
| rtc::MemoryStream recv_stream_; |
| }; |
| |
| |
| class PseudoTcpTestPingPong : public PseudoTcpTestBase { |
| public: |
| PseudoTcpTestPingPong() |
| : iterations_remaining_(0), |
| sender_(NULL), |
| receiver_(NULL), |
| bytes_per_send_(0) { |
| } |
| void SetBytesPerSend(int bytes) { |
| bytes_per_send_ = bytes; |
| } |
| void TestPingPong(int size, int iterations) { |
| uint32 start, elapsed; |
| iterations_remaining_ = iterations; |
| receiver_ = &remote_; |
| sender_ = &local_; |
| // Create some dummy data to send. |
| send_stream_.ReserveSize(size); |
| for (int i = 0; i < size; ++i) { |
| char ch = static_cast<char>(i); |
| send_stream_.Write(&ch, 1, NULL, NULL); |
| } |
| send_stream_.Rewind(); |
| // Prepare the receive stream. |
| recv_stream_.ReserveSize(size); |
| // Connect and wait until connected. |
| start = rtc::Time(); |
| EXPECT_EQ(0, Connect()); |
| EXPECT_TRUE_WAIT(have_connected_, kConnectTimeoutMs); |
| // Sending will start from OnTcpWriteable and stop when the required |
| // number of iterations have completed. |
| EXPECT_TRUE_WAIT(have_disconnected_, kTransferTimeoutMs); |
| elapsed = rtc::TimeSince(start); |
| LOG(LS_INFO) << "Performed " << iterations << " pings in " |
| << elapsed << " ms"; |
| } |
| |
| private: |
| // IPseudoTcpNotify interface |
| |
| virtual void OnTcpReadable(PseudoTcp* tcp) { |
| if (tcp != receiver_) { |
| LOG_F(LS_ERROR) << "unexpected OnTcpReadable"; |
| return; |
| } |
| // Stream bytes to the recv stream as they arrive. |
| ReadData(); |
| // If we've received the desired amount of data, rewind things |
| // and send it back the other way! |
| size_t position, desired; |
| recv_stream_.GetPosition(&position); |
| send_stream_.GetSize(&desired); |
| if (position == desired) { |
| if (receiver_ == &local_ && --iterations_remaining_ == 0) { |
| Close(); |
| // TODO: Fake OnTcpClosed() on the receiver for now. |
| OnTcpClosed(&remote_, 0); |
| return; |
| } |
| PseudoTcp* tmp = receiver_; |
| receiver_ = sender_; |
| sender_ = tmp; |
| recv_stream_.Rewind(); |
| send_stream_.Rewind(); |
| OnTcpWriteable(sender_); |
| } |
| } |
| virtual void OnTcpWriteable(PseudoTcp* tcp) { |
| if (tcp != sender_) |
| return; |
| // Write bytes from the send stream when we can. |
| // Shut down when we've sent everything. |
| LOG(LS_VERBOSE) << "Flow Control Lifted"; |
| WriteData(); |
| } |
| |
| void ReadData() { |
| char block[kBlockSize]; |
| size_t position; |
| int rcvd; |
| do { |
| rcvd = receiver_->Recv(block, sizeof(block)); |
| if (rcvd != -1) { |
| recv_stream_.Write(block, rcvd, NULL, NULL); |
| recv_stream_.GetPosition(&position); |
| LOG(LS_VERBOSE) << "Received: " << position; |
| } |
| } while (rcvd > 0); |
| } |
| void WriteData() { |
| size_t position, tosend; |
| int sent; |
| char block[kBlockSize]; |
| do { |
| send_stream_.GetPosition(&position); |
| tosend = bytes_per_send_ ? bytes_per_send_ : sizeof(block); |
| if (send_stream_.Read(block, tosend, &tosend, NULL) != |
| rtc::SR_EOS) { |
| sent = sender_->Send(block, tosend); |
| UpdateLocalClock(); |
| if (sent != -1) { |
| send_stream_.SetPosition(position + sent); |
| LOG(LS_VERBOSE) << "Sent: " << position + sent; |
| } else { |
| send_stream_.SetPosition(position); |
| LOG(LS_VERBOSE) << "Flow Controlled"; |
| } |
| } else { |
| sent = static_cast<int>(tosend = 0); |
| } |
| } while (sent > 0); |
| } |
| |
| private: |
| int iterations_remaining_; |
| PseudoTcp* sender_; |
| PseudoTcp* receiver_; |
| int bytes_per_send_; |
| }; |
| |
| // Fill the receiver window until it is full, drain it and then |
| // fill it with the same amount. This is to test that receiver window |
| // contracts and enlarges correctly. |
| class PseudoTcpTestReceiveWindow : public PseudoTcpTestBase { |
| public: |
| // Not all the data are transfered, |size| just need to be big enough |
| // to fill up the receiver window twice. |
| void TestTransfer(int size) { |
| // Create some dummy data to send. |
| send_stream_.ReserveSize(size); |
| for (int i = 0; i < size; ++i) { |
| char ch = static_cast<char>(i); |
| send_stream_.Write(&ch, 1, NULL, NULL); |
| } |
| send_stream_.Rewind(); |
| |
| // Prepare the receive stream. |
| recv_stream_.ReserveSize(size); |
| |
| // Connect and wait until connected. |
| EXPECT_EQ(0, Connect()); |
| EXPECT_TRUE_WAIT(have_connected_, kConnectTimeoutMs); |
| |
| rtc::Thread::Current()->Post(this, MSG_WRITE); |
| EXPECT_TRUE_WAIT(have_disconnected_, kTransferTimeoutMs); |
| |
| ASSERT_EQ(2u, send_position_.size()); |
| ASSERT_EQ(2u, recv_position_.size()); |
| |
| const size_t estimated_recv_window = EstimateReceiveWindowSize(); |
| |
| // The difference in consecutive send positions should equal the |
| // receive window size or match very closely. This verifies that receive |
| // window is open after receiver drained all the data. |
| const size_t send_position_diff = send_position_[1] - send_position_[0]; |
| EXPECT_GE(1024u, estimated_recv_window - send_position_diff); |
| |
| // Receiver drained the receive window twice. |
| EXPECT_EQ(2 * estimated_recv_window, recv_position_[1]); |
| } |
| |
| virtual void OnMessage(rtc::Message* message) { |
| int message_id = message->message_id; |
| PseudoTcpTestBase::OnMessage(message); |
| |
| switch (message_id) { |
| case MSG_WRITE: { |
| WriteData(); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| uint32 EstimateReceiveWindowSize() const { |
| return static_cast<uint32>(recv_position_[0]); |
| } |
| |
| uint32 EstimateSendWindowSize() const { |
| return static_cast<uint32>(send_position_[0] - recv_position_[0]); |
| } |
| |
| private: |
| // IPseudoTcpNotify interface |
| virtual void OnTcpReadable(PseudoTcp* tcp) { |
| } |
| |
| virtual void OnTcpWriteable(PseudoTcp* tcp) { |
| } |
| |
| void ReadUntilIOPending() { |
| char block[kBlockSize]; |
| size_t position; |
| int rcvd; |
| |
| do { |
| rcvd = remote_.Recv(block, sizeof(block)); |
| if (rcvd != -1) { |
| recv_stream_.Write(block, rcvd, NULL, NULL); |
| recv_stream_.GetPosition(&position); |
| LOG(LS_VERBOSE) << "Received: " << position; |
| } |
| } while (rcvd > 0); |
| |
| recv_stream_.GetPosition(&position); |
| recv_position_.push_back(position); |
| |
| // Disconnect if we have done two transfers. |
| if (recv_position_.size() == 2u) { |
| Close(); |
| OnTcpClosed(&remote_, 0); |
| } else { |
| WriteData(); |
| } |
| } |
| |
| void WriteData() { |
| size_t position, tosend; |
| int sent; |
| char block[kBlockSize]; |
| do { |
| send_stream_.GetPosition(&position); |
| if (send_stream_.Read(block, sizeof(block), &tosend, NULL) != |
| rtc::SR_EOS) { |
| sent = local_.Send(block, tosend); |
| UpdateLocalClock(); |
| if (sent != -1) { |
| send_stream_.SetPosition(position + sent); |
| LOG(LS_VERBOSE) << "Sent: " << position + sent; |
| } else { |
| send_stream_.SetPosition(position); |
| LOG(LS_VERBOSE) << "Flow Controlled"; |
| } |
| } else { |
| sent = static_cast<int>(tosend = 0); |
| } |
| } while (sent > 0); |
| // At this point, we've filled up the available space in the send queue. |
| |
| int message_queue_size = |
| static_cast<int>(rtc::Thread::Current()->size()); |
| // The message queue will always have at least 2 messages, an RCLOCK and |
| // an LCLOCK, since they are added back on the delay queue at the same time |
| // they are pulled off and therefore are never really removed. |
| if (message_queue_size > 2) { |
| // If there are non-clock messages remaining, attempt to continue sending |
| // after giving those messages time to process, which should free up the |
| // send buffer. |
| rtc::Thread::Current()->PostDelayed(10, this, MSG_WRITE); |
| } else { |
| if (!remote_.isReceiveBufferFull()) { |
| LOG(LS_ERROR) << "This shouldn't happen - the send buffer is full, " |
| << "the receive buffer is not, and there are no " |
| << "remaining messages to process."; |
| } |
| send_stream_.GetPosition(&position); |
| send_position_.push_back(position); |
| |
| // Drain the receiver buffer. |
| ReadUntilIOPending(); |
| } |
| } |
| |
| private: |
| rtc::MemoryStream send_stream_; |
| rtc::MemoryStream recv_stream_; |
| |
| std::vector<size_t> send_position_; |
| std::vector<size_t> recv_position_; |
| }; |
| |
| // Basic end-to-end data transfer tests |
| |
| // Test the normal case of sending data from one side to the other. |
| TEST_F(PseudoTcpTest, TestSend) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| TestTransfer(1000000); |
| } |
| |
| // Test sending data with a 50 ms RTT. Transmission should take longer due |
| // to a slower ramp-up in send rate. |
| TEST_F(PseudoTcpTest, TestSendWithDelay) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetDelay(50); |
| TestTransfer(1000000); |
| } |
| |
| // Test sending data with packet loss. Transmission should take much longer due |
| // to send back-off when loss occurs. |
| TEST_F(PseudoTcpTest, TestSendWithLoss) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetLoss(10); |
| TestTransfer(100000); // less data so test runs faster |
| } |
| |
| // Test sending data with a 50 ms RTT and 10% packet loss. Transmission should |
| // take much longer due to send back-off and slower detection of loss. |
| TEST_F(PseudoTcpTest, TestSendWithDelayAndLoss) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetDelay(50); |
| SetLoss(10); |
| TestTransfer(100000); // less data so test runs faster |
| } |
| |
| // Test sending data with 10% packet loss and Nagling disabled. Transmission |
| // should take about the same time as with Nagling enabled. |
| TEST_F(PseudoTcpTest, TestSendWithLossAndOptNaglingOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetLoss(10); |
| SetOptNagling(false); |
| TestTransfer(100000); // less data so test runs faster |
| } |
| |
| // Test sending data with 10% packet loss and Delayed ACK disabled. |
| // Transmission should be slightly faster than with it enabled. |
| TEST_F(PseudoTcpTest, TestSendWithLossAndOptAckDelayOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetLoss(10); |
| SetOptAckDelay(0); |
| TestTransfer(100000); |
| } |
| |
| // Test sending data with 50ms delay and Nagling disabled. |
| TEST_F(PseudoTcpTest, TestSendWithDelayAndOptNaglingOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetDelay(50); |
| SetOptNagling(false); |
| TestTransfer(100000); // less data so test runs faster |
| } |
| |
| // Test sending data with 50ms delay and Delayed ACK disabled. |
| TEST_F(PseudoTcpTest, TestSendWithDelayAndOptAckDelayOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetDelay(50); |
| SetOptAckDelay(0); |
| TestTransfer(100000); // less data so test runs faster |
| } |
| |
| // Test a large receive buffer with a sender that doesn't support scaling. |
| TEST_F(PseudoTcpTest, TestSendRemoteNoWindowScale) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetLocalOptRcvBuf(100000); |
| DisableRemoteWindowScale(); |
| TestTransfer(1000000); |
| } |
| |
| // Test a large sender-side receive buffer with a receiver that doesn't support |
| // scaling. |
| TEST_F(PseudoTcpTest, TestSendLocalNoWindowScale) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(100000); |
| DisableLocalWindowScale(); |
| TestTransfer(1000000); |
| } |
| |
| // Test when both sides use window scaling. |
| TEST_F(PseudoTcpTest, TestSendBothUseWindowScale) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(100000); |
| SetLocalOptRcvBuf(100000); |
| TestTransfer(1000000); |
| } |
| |
| // Test using a large window scale value. |
| TEST_F(PseudoTcpTest, TestSendLargeInFlight) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(100000); |
| SetLocalOptRcvBuf(100000); |
| SetOptSndBuf(150000); |
| TestTransfer(1000000); |
| } |
| |
| TEST_F(PseudoTcpTest, TestSendBothUseLargeWindowScale) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(1000000); |
| SetLocalOptRcvBuf(1000000); |
| TestTransfer(10000000); |
| } |
| |
| // Test using a small receive buffer. |
| TEST_F(PseudoTcpTest, TestSendSmallReceiveBuffer) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(10000); |
| SetLocalOptRcvBuf(10000); |
| TestTransfer(1000000); |
| } |
| |
| // Test using a very small receive buffer. |
| TEST_F(PseudoTcpTest, TestSendVerySmallReceiveBuffer) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetRemoteOptRcvBuf(100); |
| SetLocalOptRcvBuf(100); |
| TestTransfer(100000); |
| } |
| |
| // Ping-pong (request/response) tests |
| |
| // Test sending <= 1x MTU of data in each ping/pong. Should take <10ms. |
| TEST_F(PseudoTcpTestPingPong, TestPingPong1xMtu) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| TestPingPong(100, 100); |
| } |
| |
| // Test sending 2x-3x MTU of data in each ping/pong. Should take <10ms. |
| TEST_F(PseudoTcpTestPingPong, TestPingPong3xMtu) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| TestPingPong(400, 100); |
| } |
| |
| // Test sending 1x-2x MTU of data in each ping/pong. |
| // Should take ~1s, due to interaction between Nagling and Delayed ACK. |
| TEST_F(PseudoTcpTestPingPong, TestPingPong2xMtu) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| TestPingPong(2000, 5); |
| } |
| |
| // Test sending 1x-2x MTU of data in each ping/pong with Delayed ACK off. |
| // Should take <10ms. |
| TEST_F(PseudoTcpTestPingPong, TestPingPong2xMtuWithAckDelayOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptAckDelay(0); |
| TestPingPong(2000, 100); |
| } |
| |
| // Test sending 1x-2x MTU of data in each ping/pong with Nagling off. |
| // Should take <10ms. |
| TEST_F(PseudoTcpTestPingPong, TestPingPong2xMtuWithNaglingOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptNagling(false); |
| TestPingPong(2000, 5); |
| } |
| |
| // Test sending a ping as pair of short (non-full) segments. |
| // Should take ~1s, due to Delayed ACK interaction with Nagling. |
| TEST_F(PseudoTcpTestPingPong, TestPingPongShortSegments) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptAckDelay(5000); |
| SetBytesPerSend(50); // i.e. two Send calls per payload |
| TestPingPong(100, 5); |
| } |
| |
| // Test sending ping as a pair of short (non-full) segments, with Nagling off. |
| // Should take <10ms. |
| TEST_F(PseudoTcpTestPingPong, TestPingPongShortSegmentsWithNaglingOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptNagling(false); |
| SetBytesPerSend(50); // i.e. two Send calls per payload |
| TestPingPong(100, 5); |
| } |
| |
| // Test sending <= 1x MTU of data ping/pong, in two segments, no Delayed ACK. |
| // Should take ~1s. |
| TEST_F(PseudoTcpTestPingPong, TestPingPongShortSegmentsWithAckDelayOff) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetBytesPerSend(50); // i.e. two Send calls per payload |
| SetOptAckDelay(0); |
| TestPingPong(100, 5); |
| } |
| |
| // Test that receive window expands and contract correctly. |
| TEST_F(PseudoTcpTestReceiveWindow, TestReceiveWindow) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptNagling(false); |
| SetOptAckDelay(0); |
| TestTransfer(1024 * 1000); |
| } |
| |
| // Test setting send window size to a very small value. |
| TEST_F(PseudoTcpTestReceiveWindow, TestSetVerySmallSendWindowSize) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptNagling(false); |
| SetOptAckDelay(0); |
| SetOptSndBuf(900); |
| TestTransfer(1024 * 1000); |
| EXPECT_EQ(900u, EstimateSendWindowSize()); |
| } |
| |
| // Test setting receive window size to a value other than default. |
| TEST_F(PseudoTcpTestReceiveWindow, TestSetReceiveWindowSize) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1500); |
| SetOptNagling(false); |
| SetOptAckDelay(0); |
| SetRemoteOptRcvBuf(100000); |
| SetLocalOptRcvBuf(100000); |
| TestTransfer(1024 * 1000); |
| EXPECT_EQ(100000u, EstimateReceiveWindowSize()); |
| } |
| |
| /* Test sending data with mismatched MTUs. We should detect this and reduce |
| // our packet size accordingly. |
| // TODO: This doesn't actually work right now. The current code |
| // doesn't detect if the MTU is set too high on either side. |
| TEST_F(PseudoTcpTest, TestSendWithMismatchedMtus) { |
| SetLocalMtu(1500); |
| SetRemoteMtu(1280); |
| TestTransfer(1000000); |
| } |
| */ |