blob: 12baa493bd60cd0667bb206f39e9bfa9ddb64467 [file] [log] [blame]
syntax = "proto2";
option optimize_for = LITE_RUNTIME;
package webrtc.rtclog;
enum MediaType {
ANY = 0;
AUDIO = 1;
VIDEO = 2;
DATA = 3;
}
// This is the main message to dump to a file, it can contain multiple event
// messages, but it is possible to append multiple EventStreams (each with a
// single event) to a file.
// This has the benefit that there's no need to keep all data in memory.
message EventStream {
repeated Event stream = 1;
}
message Event {
// required - Elapsed wallclock time in us since the start of the log.
optional int64 timestamp_us = 1;
// The different types of events that can occur, the UNKNOWN_EVENT entry
// is added in case future EventTypes are added, in that case old code will
// receive the new events as UNKNOWN_EVENT.
enum EventType {
UNKNOWN_EVENT = 0;
LOG_START = 1;
LOG_END = 2;
RTP_EVENT = 3;
RTCP_EVENT = 4;
AUDIO_PLAYOUT_EVENT = 5;
LOSS_BASED_BWE_UPDATE = 6;
DELAY_BASED_BWE_UPDATE = 7;
VIDEO_RECEIVER_CONFIG_EVENT = 8;
VIDEO_SENDER_CONFIG_EVENT = 9;
AUDIO_RECEIVER_CONFIG_EVENT = 10;
AUDIO_SENDER_CONFIG_EVENT = 11;
AUDIO_NETWORK_ADAPTATION_EVENT = 16;
BWE_PROBE_CLUSTER_CREATED_EVENT = 17;
BWE_PROBE_RESULT_EVENT = 18;
ALR_STATE_EVENT = 19;
ICE_CANDIDATE_PAIR_CONFIG = 20;
ICE_CANDIDATE_PAIR_EVENT = 21;
REMOTE_ESTIMATE = 22;
}
// required - Indicates the type of this event
optional EventType type = 2;
oneof subtype {
// required if type == RTP_EVENT
RtpPacket rtp_packet = 3;
// required if type == RTCP_EVENT
RtcpPacket rtcp_packet = 4;
// required if type == AUDIO_PLAYOUT_EVENT
AudioPlayoutEvent audio_playout_event = 5;
// required if type == LOSS_BASED_BWE_UPDATE
LossBasedBweUpdate loss_based_bwe_update = 6;
// required if type == DELAY_BASED_BWE_UPDATE
DelayBasedBweUpdate delay_based_bwe_update = 7;
// required if type == VIDEO_RECEIVER_CONFIG_EVENT
VideoReceiveConfig video_receiver_config = 8;
// required if type == VIDEO_SENDER_CONFIG_EVENT
VideoSendConfig video_sender_config = 9;
// required if type == AUDIO_RECEIVER_CONFIG_EVENT
AudioReceiveConfig audio_receiver_config = 10;
// required if type == AUDIO_SENDER_CONFIG_EVENT
AudioSendConfig audio_sender_config = 11;
// required if type == AUDIO_NETWORK_ADAPTATION_EVENT
AudioNetworkAdaptation audio_network_adaptation = 16;
// required if type == BWE_PROBE_CLUSTER_CREATED_EVENT
BweProbeCluster probe_cluster = 17;
// required if type == BWE_PROBE_RESULT_EVENT
BweProbeResult probe_result = 18;
// required if type == ALR_STATE_EVENT
AlrState alr_state = 19;
// required if type == ICE_CANDIDATE_PAIR_CONFIG
IceCandidatePairConfig ice_candidate_pair_config = 20;
// required if type == ICE_CANDIDATE_PAIR_EVENT
IceCandidatePairEvent ice_candidate_pair_event = 21;
// required if type == REMOTE_ESTIMATE
RemoteEstimate remote_estimate = 22;
}
}
message RtpPacket {
// required - True if the packet is incoming w.r.t. the user logging the data
optional bool incoming = 1;
optional MediaType type = 2 [deprecated = true];
// required - The size of the packet including both payload and header.
optional uint32 packet_length = 3;
// required - The RTP header only.
optional bytes header = 4;
// optional - The probe cluster id.
optional int32 probe_cluster_id = 5;
// Do not add code to log user payload data without a privacy review!
}
message RtcpPacket {
// required - True if the packet is incoming w.r.t. the user logging the data
optional bool incoming = 1;
optional MediaType type = 2 [deprecated = true];
// required - The whole packet including both payload and header.
optional bytes packet_data = 3;
}
message AudioPlayoutEvent {
// TODO(ivoc): Rename, we currently use the "remote" ssrc, i.e. identifying
// the receive stream, while local_ssrc identifies the send stream, if any.
// required - The SSRC of the audio stream associated with the playout event.
optional uint32 local_ssrc = 2;
}
message LossBasedBweUpdate {
// required - Bandwidth estimate (in bps) after the update.
optional int32 bitrate_bps = 1;
// required - Fraction of lost packets since last receiver report
// computed as floor( 256 * (#lost_packets / #total_packets) ).
// The possible values range from 0 to 255.
optional uint32 fraction_loss = 2;
// TODO(terelius): Is this really needed? Remove or make optional?
// required - Total number of packets that the BWE update is based on.
optional int32 total_packets = 3;
}
message DelayBasedBweUpdate {
enum DetectorState {
BWE_NORMAL = 0;
BWE_UNDERUSING = 1;
BWE_OVERUSING = 2;
}
// required - Bandwidth estimate (in bps) after the update.
optional int32 bitrate_bps = 1;
// required - The state of the overuse detector.
optional DetectorState detector_state = 2;
}
// TODO(terelius): Video and audio streams could in principle share SSRC,
// so identifying a stream based only on SSRC might not work.
// It might be better to use a combination of SSRC and media type
// or SSRC and port number, but for now we will rely on SSRC only.
message VideoReceiveConfig {
// required - Synchronization source (stream identifier) to be received.
optional uint32 remote_ssrc = 1;
// required - Sender SSRC used for sending RTCP (such as receiver reports).
optional uint32 local_ssrc = 2;
// Compound mode is described by RFC 4585 and reduced-size
// RTCP mode is described by RFC 5506.
enum RtcpMode {
RTCP_COMPOUND = 1;
RTCP_REDUCEDSIZE = 2;
}
// required - RTCP mode to use.
optional RtcpMode rtcp_mode = 3;
// required - Receiver estimated maximum bandwidth.
optional bool remb = 4;
// Map from video RTP payload type -> RTX config.
repeated RtxMap rtx_map = 5;
// RTP header extensions used for the received stream.
repeated RtpHeaderExtension header_extensions = 6;
// List of decoders associated with the stream.
repeated DecoderConfig decoders = 7;
}
// Maps decoder names to payload types.
message DecoderConfig {
// required
optional string name = 1;
// required
optional int32 payload_type = 2;
}
// Maps RTP header extension names to numerical IDs.
message RtpHeaderExtension {
// required
optional string name = 1;
// required
optional int32 id = 2;
}
// RTX settings for incoming video payloads that may be received.
// RTX is disabled if there's no config present.
message RtxConfig {
// required - SSRC to use for the RTX stream.
optional uint32 rtx_ssrc = 1;
// required - Payload type to use for the RTX stream.
optional int32 rtx_payload_type = 2;
}
message RtxMap {
// required
optional int32 payload_type = 1;
// required
optional RtxConfig config = 2;
}
message VideoSendConfig {
// Synchronization source (stream identifier) for outgoing stream.
// One stream can have several ssrcs for e.g. simulcast.
// At least one ssrc is required.
repeated uint32 ssrcs = 1;
// RTP header extensions used for the outgoing stream.
repeated RtpHeaderExtension header_extensions = 2;
// List of SSRCs for retransmitted packets.
repeated uint32 rtx_ssrcs = 3;
// required if rtx_ssrcs is used - Payload type for retransmitted packets.
optional int32 rtx_payload_type = 4;
// required - Encoder associated with the stream.
optional EncoderConfig encoder = 5;
}
// Maps encoder names to payload types.
message EncoderConfig {
// required
optional string name = 1;
// required
optional int32 payload_type = 2;
}
message AudioReceiveConfig {
// required - Synchronization source (stream identifier) to be received.
optional uint32 remote_ssrc = 1;
// required - Sender SSRC used for sending RTCP (such as receiver reports).
optional uint32 local_ssrc = 2;
// RTP header extensions used for the received audio stream.
repeated RtpHeaderExtension header_extensions = 3;
}
message AudioSendConfig {
// required - Synchronization source (stream identifier) for outgoing stream.
optional uint32 ssrc = 1;
// RTP header extensions used for the outgoing audio stream.
repeated RtpHeaderExtension header_extensions = 2;
}
message AudioNetworkAdaptation {
// Bit rate that the audio encoder is operating at.
optional int32 bitrate_bps = 1;
// Frame length that each encoded audio packet consists of.
optional int32 frame_length_ms = 2;
// Packet loss fraction that the encoder's forward error correction (FEC) is
// optimized for.
optional float uplink_packet_loss_fraction = 3;
// Whether forward error correction (FEC) is turned on or off.
optional bool enable_fec = 4;
// Whether discontinuous transmission (DTX) is turned on or off.
optional bool enable_dtx = 5;
// Number of audio channels that each encoded packet consists of.
optional uint32 num_channels = 6;
}
message BweProbeCluster {
// required - The id of this probe cluster.
optional int32 id = 1;
// required - The bitrate in bps that this probe cluster is meant to probe.
optional int32 bitrate_bps = 2;
// required - The minimum number of packets used to probe the given bitrate.
optional uint32 min_packets = 3;
// required - The minimum number of bytes used to probe the given bitrate.
optional uint32 min_bytes = 4;
}
message BweProbeResult {
// required - The id of this probe cluster.
optional int32 id = 1;
enum ResultType {
SUCCESS = 0;
INVALID_SEND_RECEIVE_INTERVAL = 1;
INVALID_SEND_RECEIVE_RATIO = 2;
TIMEOUT = 3;
}
// required - The result of this probing attempt.
optional ResultType result = 2;
// optional - but required if result == SUCCESS. The resulting bitrate in bps.
optional int32 bitrate_bps = 3;
}
message RemoteEstimate {
// optional - Lower estimate of link capacity.
optional uint32 link_capacity_lower_kbps = 1;
// optional - Upper estimate of link capacity.
optional uint32 link_capacity_upper_kbps = 2;
}
message AlrState {
// required - If we are in ALR or not.
optional bool in_alr = 1;
}
message IceCandidatePairConfig {
enum IceCandidatePairConfigType {
ADDED = 0;
UPDATED = 1;
DESTROYED = 2;
SELECTED = 3;
}
enum IceCandidateType {
LOCAL = 0;
STUN = 1;
PRFLX = 2;
RELAY = 3;
UNKNOWN_CANDIDATE_TYPE = 4;
}
enum Protocol {
UDP = 0;
TCP = 1;
SSLTCP = 2;
TLS = 3;
UNKNOWN_PROTOCOL = 4;
}
enum AddressFamily {
IPV4 = 0;
IPV6 = 1;
UNKNOWN_ADDRESS_FAMILY = 2;
}
enum NetworkType {
ETHERNET = 0;
LOOPBACK = 1;
WIFI = 2;
VPN = 3;
CELLULAR = 4;
UNKNOWN_NETWORK_TYPE = 5;
}
// required
optional IceCandidatePairConfigType config_type = 1;
// required
optional uint32 candidate_pair_id = 2;
// required
optional IceCandidateType local_candidate_type = 3;
// required
optional Protocol local_relay_protocol = 4;
// required
optional NetworkType local_network_type = 5;
// required
optional AddressFamily local_address_family = 6;
// required
optional IceCandidateType remote_candidate_type = 7;
// required
optional AddressFamily remote_address_family = 8;
// required
optional Protocol candidate_pair_protocol = 9;
}
message IceCandidatePairEvent {
enum IceCandidatePairEventType {
CHECK_SENT = 0;
CHECK_RECEIVED = 1;
CHECK_RESPONSE_SENT = 2;
CHECK_RESPONSE_RECEIVED = 3;
}
// required
optional IceCandidatePairEventType event_type = 1;
// required
optional uint32 candidate_pair_id = 2;
}