| /* |
| * Copyright (c) 2014 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| // Based on the WAV file format documentation at |
| // https://ccrma.stanford.edu/courses/422/projects/WaveFormat/ and |
| // http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html |
| |
| #include "common_audio/wav_header.h" |
| |
| #include <cstring> |
| #include <limits> |
| #include <string> |
| |
| #include "rtc_base/checks.h" |
| #include "rtc_base/logging.h" |
| #include "rtc_base/sanitizer.h" |
| #include "rtc_base/system/arch.h" |
| |
| namespace webrtc { |
| namespace { |
| |
| #ifndef WEBRTC_ARCH_LITTLE_ENDIAN |
| #error "Code not working properly for big endian platforms." |
| #endif |
| |
| #pragma pack(2) |
| struct ChunkHeader { |
| uint32_t ID; |
| uint32_t Size; |
| }; |
| static_assert(sizeof(ChunkHeader) == 8, "ChunkHeader size"); |
| |
| #pragma pack(2) |
| struct RiffHeader { |
| ChunkHeader header; |
| uint32_t Format; |
| }; |
| static_assert(sizeof(RiffHeader) == sizeof(ChunkHeader) + 4, "RiffHeader size"); |
| |
| // We can't nest this definition in WavHeader, because VS2013 gives an error |
| // on sizeof(WavHeader::fmt): "error C2070: 'unknown': illegal sizeof operand". |
| #pragma pack(2) |
| struct FmtPcmSubchunk { |
| ChunkHeader header; |
| uint16_t AudioFormat; |
| uint16_t NumChannels; |
| uint32_t SampleRate; |
| uint32_t ByteRate; |
| uint16_t BlockAlign; |
| uint16_t BitsPerSample; |
| }; |
| static_assert(sizeof(FmtPcmSubchunk) == 24, "FmtPcmSubchunk size"); |
| const uint32_t kFmtPcmSubchunkSize = |
| sizeof(FmtPcmSubchunk) - sizeof(ChunkHeader); |
| |
| // Pack struct to avoid additional padding bytes. |
| #pragma pack(2) |
| struct FmtIeeeFloatSubchunk { |
| ChunkHeader header; |
| uint16_t AudioFormat; |
| uint16_t NumChannels; |
| uint32_t SampleRate; |
| uint32_t ByteRate; |
| uint16_t BlockAlign; |
| uint16_t BitsPerSample; |
| uint16_t ExtensionSize; |
| }; |
| static_assert(sizeof(FmtIeeeFloatSubchunk) == 26, "FmtIeeeFloatSubchunk size"); |
| const uint32_t kFmtIeeeFloatSubchunkSize = |
| sizeof(FmtIeeeFloatSubchunk) - sizeof(ChunkHeader); |
| |
| // Simple PCM wav header. It does not include chunks that are not essential to |
| // read audio samples. |
| #pragma pack(2) |
| struct WavHeaderPcm { |
| WavHeaderPcm(const WavHeaderPcm&) = default; |
| WavHeaderPcm& operator=(const WavHeaderPcm&) = default; |
| RiffHeader riff; |
| FmtPcmSubchunk fmt; |
| struct { |
| ChunkHeader header; |
| } data; |
| }; |
| static_assert(sizeof(WavHeaderPcm) == kPcmWavHeaderSize, |
| "no padding in header"); |
| |
| // IEEE Float Wav header, includes extra chunks necessary for proper non-PCM |
| // WAV implementation. |
| #pragma pack(2) |
| struct WavHeaderIeeeFloat { |
| WavHeaderIeeeFloat(const WavHeaderIeeeFloat&) = default; |
| WavHeaderIeeeFloat& operator=(const WavHeaderIeeeFloat&) = default; |
| RiffHeader riff; |
| FmtIeeeFloatSubchunk fmt; |
| struct { |
| ChunkHeader header; |
| uint32_t SampleLength; |
| } fact; |
| struct { |
| ChunkHeader header; |
| } data; |
| }; |
| static_assert(sizeof(WavHeaderIeeeFloat) == kIeeeFloatWavHeaderSize, |
| "no padding in header"); |
| |
| uint32_t PackFourCC(char a, char b, char c, char d) { |
| uint32_t packed_value = |
| static_cast<uint32_t>(a) | static_cast<uint32_t>(b) << 8 | |
| static_cast<uint32_t>(c) << 16 | static_cast<uint32_t>(d) << 24; |
| return packed_value; |
| } |
| |
| std::string ReadFourCC(uint32_t x) { |
| return std::string(reinterpret_cast<char*>(&x), 4); |
| } |
| |
| uint16_t MapWavFormatToHeaderField(WavFormat format) { |
| switch (format) { |
| case WavFormat::kWavFormatPcm: |
| return 1; |
| case WavFormat::kWavFormatIeeeFloat: |
| return 3; |
| case WavFormat::kWavFormatALaw: |
| return 6; |
| case WavFormat::kWavFormatMuLaw: |
| return 7; |
| } |
| RTC_CHECK_NOTREACHED(); |
| } |
| |
| WavFormat MapHeaderFieldToWavFormat(uint16_t format_header_value) { |
| if (format_header_value == 1) { |
| return WavFormat::kWavFormatPcm; |
| } |
| if (format_header_value == 3) { |
| return WavFormat::kWavFormatIeeeFloat; |
| } |
| |
| RTC_CHECK(false) << "Unsupported WAV format"; |
| } |
| |
| uint32_t RiffChunkSize(size_t bytes_in_payload, size_t header_size) { |
| return static_cast<uint32_t>(bytes_in_payload + header_size - |
| sizeof(ChunkHeader)); |
| } |
| |
| uint32_t ByteRate(size_t num_channels, |
| int sample_rate, |
| size_t bytes_per_sample) { |
| return static_cast<uint32_t>(num_channels * sample_rate * bytes_per_sample); |
| } |
| |
| uint16_t BlockAlign(size_t num_channels, size_t bytes_per_sample) { |
| return static_cast<uint16_t>(num_channels * bytes_per_sample); |
| } |
| |
| // Finds a chunk having the sought ID. If found, then |readable| points to the |
| // first byte of the sought chunk data. If not found, the end of the file is |
| // reached. |
| bool FindWaveChunk(ChunkHeader* chunk_header, |
| WavHeaderReader* readable, |
| const std::string sought_chunk_id) { |
| RTC_DCHECK_EQ(sought_chunk_id.size(), 4); |
| while (true) { |
| if (readable->Read(chunk_header, sizeof(*chunk_header)) != |
| sizeof(*chunk_header)) |
| return false; // EOF. |
| if (ReadFourCC(chunk_header->ID) == sought_chunk_id) |
| return true; // Sought chunk found. |
| // Ignore current chunk by skipping its payload. |
| if (!readable->SeekForward(chunk_header->Size)) |
| return false; // EOF or error. |
| } |
| } |
| |
| bool ReadFmtChunkData(FmtPcmSubchunk* fmt_subchunk, WavHeaderReader* readable) { |
| // Reads "fmt " chunk payload. |
| if (readable->Read(&(fmt_subchunk->AudioFormat), kFmtPcmSubchunkSize) != |
| kFmtPcmSubchunkSize) |
| return false; |
| const uint32_t fmt_size = fmt_subchunk->header.Size; |
| if (fmt_size != kFmtPcmSubchunkSize) { |
| // There is an optional two-byte extension field permitted to be present |
| // with PCM, but which must be zero. |
| int16_t ext_size; |
| if (kFmtPcmSubchunkSize + sizeof(ext_size) != fmt_size) |
| return false; |
| if (readable->Read(&ext_size, sizeof(ext_size)) != sizeof(ext_size)) |
| return false; |
| if (ext_size != 0) |
| return false; |
| } |
| return true; |
| } |
| |
| void WritePcmWavHeader(size_t num_channels, |
| int sample_rate, |
| size_t bytes_per_sample, |
| size_t num_samples, |
| uint8_t* buf, |
| size_t* header_size) { |
| RTC_CHECK(buf); |
| RTC_CHECK(header_size); |
| *header_size = kPcmWavHeaderSize; |
| auto header = rtc::MsanUninitialized<WavHeaderPcm>({}); |
| const size_t bytes_in_payload = bytes_per_sample * num_samples; |
| |
| header.riff.header.ID = PackFourCC('R', 'I', 'F', 'F'); |
| header.riff.header.Size = RiffChunkSize(bytes_in_payload, *header_size); |
| header.riff.Format = PackFourCC('W', 'A', 'V', 'E'); |
| header.fmt.header.ID = PackFourCC('f', 'm', 't', ' '); |
| header.fmt.header.Size = kFmtPcmSubchunkSize; |
| header.fmt.AudioFormat = MapWavFormatToHeaderField(WavFormat::kWavFormatPcm); |
| header.fmt.NumChannels = static_cast<uint16_t>(num_channels); |
| header.fmt.SampleRate = sample_rate; |
| header.fmt.ByteRate = ByteRate(num_channels, sample_rate, bytes_per_sample); |
| header.fmt.BlockAlign = BlockAlign(num_channels, bytes_per_sample); |
| header.fmt.BitsPerSample = static_cast<uint16_t>(8 * bytes_per_sample); |
| header.data.header.ID = PackFourCC('d', 'a', 't', 'a'); |
| header.data.header.Size = static_cast<uint32_t>(bytes_in_payload); |
| |
| // Do an extra copy rather than writing everything to buf directly, since buf |
| // might not be correctly aligned. |
| memcpy(buf, &header, *header_size); |
| } |
| |
| void WriteIeeeFloatWavHeader(size_t num_channels, |
| int sample_rate, |
| size_t bytes_per_sample, |
| size_t num_samples, |
| uint8_t* buf, |
| size_t* header_size) { |
| RTC_CHECK(buf); |
| RTC_CHECK(header_size); |
| *header_size = kIeeeFloatWavHeaderSize; |
| auto header = rtc::MsanUninitialized<WavHeaderIeeeFloat>({}); |
| const size_t bytes_in_payload = bytes_per_sample * num_samples; |
| |
| header.riff.header.ID = PackFourCC('R', 'I', 'F', 'F'); |
| header.riff.header.Size = RiffChunkSize(bytes_in_payload, *header_size); |
| header.riff.Format = PackFourCC('W', 'A', 'V', 'E'); |
| header.fmt.header.ID = PackFourCC('f', 'm', 't', ' '); |
| header.fmt.header.Size = kFmtIeeeFloatSubchunkSize; |
| header.fmt.AudioFormat = |
| MapWavFormatToHeaderField(WavFormat::kWavFormatIeeeFloat); |
| header.fmt.NumChannels = static_cast<uint16_t>(num_channels); |
| header.fmt.SampleRate = sample_rate; |
| header.fmt.ByteRate = ByteRate(num_channels, sample_rate, bytes_per_sample); |
| header.fmt.BlockAlign = BlockAlign(num_channels, bytes_per_sample); |
| header.fmt.BitsPerSample = static_cast<uint16_t>(8 * bytes_per_sample); |
| header.fmt.ExtensionSize = 0; |
| header.fact.header.ID = PackFourCC('f', 'a', 'c', 't'); |
| header.fact.header.Size = 4; |
| header.fact.SampleLength = static_cast<uint32_t>(num_channels * num_samples); |
| header.data.header.ID = PackFourCC('d', 'a', 't', 'a'); |
| header.data.header.Size = static_cast<uint32_t>(bytes_in_payload); |
| |
| // Do an extra copy rather than writing everything to buf directly, since buf |
| // might not be correctly aligned. |
| memcpy(buf, &header, *header_size); |
| } |
| |
| // Returns the number of bytes per sample for the format. |
| size_t GetFormatBytesPerSample(WavFormat format) { |
| switch (format) { |
| case WavFormat::kWavFormatPcm: |
| // Other values may be OK, but for now we're conservative. |
| return 2; |
| case WavFormat::kWavFormatALaw: |
| case WavFormat::kWavFormatMuLaw: |
| return 1; |
| case WavFormat::kWavFormatIeeeFloat: |
| return 4; |
| } |
| RTC_CHECK_NOTREACHED(); |
| } |
| |
| bool CheckWavParameters(size_t num_channels, |
| int sample_rate, |
| WavFormat format, |
| size_t bytes_per_sample, |
| size_t num_samples) { |
| // num_channels, sample_rate, and bytes_per_sample must be positive, must fit |
| // in their respective fields, and their product must fit in the 32-bit |
| // ByteRate field. |
| if (num_channels == 0 || sample_rate <= 0 || bytes_per_sample == 0) |
| return false; |
| if (static_cast<uint64_t>(sample_rate) > std::numeric_limits<uint32_t>::max()) |
| return false; |
| if (num_channels > std::numeric_limits<uint16_t>::max()) |
| return false; |
| if (static_cast<uint64_t>(bytes_per_sample) * 8 > |
| std::numeric_limits<uint16_t>::max()) |
| return false; |
| if (static_cast<uint64_t>(sample_rate) * num_channels * bytes_per_sample > |
| std::numeric_limits<uint32_t>::max()) |
| return false; |
| |
| // format and bytes_per_sample must agree. |
| switch (format) { |
| case WavFormat::kWavFormatPcm: |
| // Other values may be OK, but for now we're conservative: |
| if (bytes_per_sample != 1 && bytes_per_sample != 2) |
| return false; |
| break; |
| case WavFormat::kWavFormatALaw: |
| case WavFormat::kWavFormatMuLaw: |
| if (bytes_per_sample != 1) |
| return false; |
| break; |
| case WavFormat::kWavFormatIeeeFloat: |
| if (bytes_per_sample != 4) |
| return false; |
| break; |
| default: |
| return false; |
| } |
| |
| // The number of bytes in the file, not counting the first ChunkHeader, must |
| // be less than 2^32; otherwise, the ChunkSize field overflows. |
| const size_t header_size = kPcmWavHeaderSize - sizeof(ChunkHeader); |
| const size_t max_samples = |
| (std::numeric_limits<uint32_t>::max() - header_size) / bytes_per_sample; |
| if (num_samples > max_samples) |
| return false; |
| |
| // Each channel must have the same number of samples. |
| if (num_samples % num_channels != 0) |
| return false; |
| |
| return true; |
| } |
| |
| } // namespace |
| |
| bool CheckWavParameters(size_t num_channels, |
| int sample_rate, |
| WavFormat format, |
| size_t num_samples) { |
| return CheckWavParameters(num_channels, sample_rate, format, |
| GetFormatBytesPerSample(format), num_samples); |
| } |
| |
| void WriteWavHeader(size_t num_channels, |
| int sample_rate, |
| WavFormat format, |
| size_t num_samples, |
| uint8_t* buf, |
| size_t* header_size) { |
| RTC_CHECK(buf); |
| RTC_CHECK(header_size); |
| |
| const size_t bytes_per_sample = GetFormatBytesPerSample(format); |
| RTC_CHECK(CheckWavParameters(num_channels, sample_rate, format, |
| bytes_per_sample, num_samples)); |
| if (format == WavFormat::kWavFormatPcm) { |
| WritePcmWavHeader(num_channels, sample_rate, bytes_per_sample, num_samples, |
| buf, header_size); |
| } else { |
| RTC_CHECK_EQ(format, WavFormat::kWavFormatIeeeFloat); |
| WriteIeeeFloatWavHeader(num_channels, sample_rate, bytes_per_sample, |
| num_samples, buf, header_size); |
| } |
| } |
| |
| bool ReadWavHeader(WavHeaderReader* readable, |
| size_t* num_channels, |
| int* sample_rate, |
| WavFormat* format, |
| size_t* bytes_per_sample, |
| size_t* num_samples, |
| int64_t* data_start_pos) { |
| // Read using the PCM header, even though it might be float Wav file |
| auto header = rtc::MsanUninitialized<WavHeaderPcm>({}); |
| |
| // Read RIFF chunk. |
| if (readable->Read(&header.riff, sizeof(header.riff)) != sizeof(header.riff)) |
| return false; |
| if (ReadFourCC(header.riff.header.ID) != "RIFF") |
| return false; |
| if (ReadFourCC(header.riff.Format) != "WAVE") |
| return false; |
| |
| // Find "fmt " and "data" chunks. While the official Wave file specification |
| // does not put requirements on the chunks order, it is uncommon to find the |
| // "data" chunk before the "fmt " one. The code below fails if this is not the |
| // case. |
| if (!FindWaveChunk(&header.fmt.header, readable, "fmt ")) { |
| RTC_LOG(LS_ERROR) << "Cannot find 'fmt ' chunk."; |
| return false; |
| } |
| if (!ReadFmtChunkData(&header.fmt, readable)) { |
| RTC_LOG(LS_ERROR) << "Cannot read 'fmt ' chunk."; |
| return false; |
| } |
| if (!FindWaveChunk(&header.data.header, readable, "data")) { |
| RTC_LOG(LS_ERROR) << "Cannot find 'data' chunk."; |
| return false; |
| } |
| |
| // Parse needed fields. |
| *format = MapHeaderFieldToWavFormat(header.fmt.AudioFormat); |
| *num_channels = header.fmt.NumChannels; |
| *sample_rate = header.fmt.SampleRate; |
| *bytes_per_sample = header.fmt.BitsPerSample / 8; |
| const size_t bytes_in_payload = header.data.header.Size; |
| if (*bytes_per_sample == 0) |
| return false; |
| *num_samples = bytes_in_payload / *bytes_per_sample; |
| |
| const size_t header_size = *format == WavFormat::kWavFormatPcm |
| ? kPcmWavHeaderSize |
| : kIeeeFloatWavHeaderSize; |
| |
| if (header.riff.header.Size < RiffChunkSize(bytes_in_payload, header_size)) |
| return false; |
| if (header.fmt.ByteRate != |
| ByteRate(*num_channels, *sample_rate, *bytes_per_sample)) |
| return false; |
| if (header.fmt.BlockAlign != BlockAlign(*num_channels, *bytes_per_sample)) |
| return false; |
| |
| if (!CheckWavParameters(*num_channels, *sample_rate, *format, |
| *bytes_per_sample, *num_samples)) { |
| return false; |
| } |
| |
| *data_start_pos = readable->GetPosition(); |
| return true; |
| } |
| |
| } // namespace webrtc |