blob: 0c31b83eb313006fb42bf8e6fde12925a708ebda [file] [log] [blame]
/*
* Copyright (c) 2013 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "webrtc/modules/audio_coding/acm2/initial_delay_manager.h"
namespace webrtc {
namespace acm2 {
InitialDelayManager::InitialDelayManager(int initial_delay_ms,
int late_packet_threshold)
: last_packet_type_(kUndefinedPacket),
last_receive_timestamp_(0),
timestamp_step_(0),
audio_payload_type_(kInvalidPayloadType),
initial_delay_ms_(initial_delay_ms),
buffered_audio_ms_(0),
buffering_(true),
playout_timestamp_(0),
late_packet_threshold_(late_packet_threshold) {
last_packet_rtp_info_.header.payloadType = kInvalidPayloadType;
last_packet_rtp_info_.header.ssrc = 0;
last_packet_rtp_info_.header.sequenceNumber = 0;
last_packet_rtp_info_.header.timestamp = 0;
}
void InitialDelayManager::UpdateLastReceivedPacket(
const WebRtcRTPHeader& rtp_info,
uint32_t receive_timestamp,
PacketType type,
bool new_codec,
int sample_rate_hz,
SyncStream* sync_stream) {
assert(sync_stream);
// If payload of audio packets is changing |new_codec| has to be true.
assert(!(!new_codec && type == kAudioPacket &&
rtp_info.header.payloadType != audio_payload_type_));
// Just shorthands.
const RTPHeader* current_header = &rtp_info.header;
RTPHeader* last_header = &last_packet_rtp_info_.header;
// Don't do anything if getting DTMF. The chance of DTMF in applications where
// initial delay is required is very low (we don't know of any). This avoids a
// lot of corner cases. The effect of ignoring DTMF packet is minimal. Note
// that DTMFs are inserted into NetEq just not accounted here.
if (type == kAvtPacket ||
(last_packet_type_ != kUndefinedPacket &&
!IsNewerSequenceNumber(current_header->sequenceNumber,
last_header->sequenceNumber))) {
sync_stream->num_sync_packets = 0;
return;
}
// Either if it is a new packet or the first packet record and set variables.
if (new_codec ||
last_packet_rtp_info_.header.payloadType == kInvalidPayloadType) {
timestamp_step_ = 0;
if (type == kAudioPacket)
audio_payload_type_ = rtp_info.header.payloadType;
else
audio_payload_type_ = kInvalidPayloadType; // Invalid.
RecordLastPacket(rtp_info, receive_timestamp, type);
sync_stream->num_sync_packets = 0;
buffered_audio_ms_ = 0;
buffering_ = true;
// If |buffering_| is set then |playout_timestamp_| should have correct
// value.
UpdatePlayoutTimestamp(*current_header, sample_rate_hz);
return;
}
uint32_t timestamp_increase = current_header->timestamp -
last_header->timestamp;
// |timestamp_increase| is invalid if this is the first packet. The effect is
// that |buffered_audio_ms_| is not increased.
if (last_packet_type_ == kUndefinedPacket) {
timestamp_increase = 0;
}
if (buffering_) {
buffered_audio_ms_ += timestamp_increase * 1000 / sample_rate_hz;
// A timestamp that reflects the initial delay, while buffering.
UpdatePlayoutTimestamp(*current_header, sample_rate_hz);
if (buffered_audio_ms_ >= initial_delay_ms_)
buffering_ = false;
}
if (current_header->sequenceNumber == last_header->sequenceNumber + 1) {
// Two consecutive audio packets, the previous packet-type is audio, so we
// can update |timestamp_step_|.
if (last_packet_type_ == kAudioPacket)
timestamp_step_ = timestamp_increase;
RecordLastPacket(rtp_info, receive_timestamp, type);
sync_stream->num_sync_packets = 0;
return;
}
uint16_t packet_gap = current_header->sequenceNumber -
last_header->sequenceNumber - 1;
// For smooth transitions leave a gap between audio and sync packets.
sync_stream->num_sync_packets = last_packet_type_ == kSyncPacket ?
packet_gap - 1 : packet_gap - 2;
// Do nothing if we haven't received any audio packet.
if (sync_stream->num_sync_packets > 0 &&
audio_payload_type_ != kInvalidPayloadType) {
if (timestamp_step_ == 0) {
// Make an estimate for |timestamp_step_| if it is not updated, yet.
assert(packet_gap > 0);
timestamp_step_ = timestamp_increase / (packet_gap + 1);
}
sync_stream->timestamp_step = timestamp_step_;
// Build the first sync-packet based on the current received packet.
memcpy(&sync_stream->rtp_info, &rtp_info, sizeof(rtp_info));
sync_stream->rtp_info.header.payloadType = audio_payload_type_;
uint16_t sequence_number_update = sync_stream->num_sync_packets + 1;
uint32_t timestamp_update = timestamp_step_ * sequence_number_update;
// Rewind sequence number and timestamps. This will give a more accurate
// description of the missing packets.
//
// Note that we leave a gap between the last packet in sync-stream and the
// current received packet, so it should be compensated for in the following
// computation of timestamps and sequence number.
sync_stream->rtp_info.header.sequenceNumber -= sequence_number_update;
sync_stream->receive_timestamp = receive_timestamp - timestamp_update;
sync_stream->rtp_info.header.timestamp -= timestamp_update;
sync_stream->rtp_info.header.payloadType = audio_payload_type_;
} else {
sync_stream->num_sync_packets = 0;
}
RecordLastPacket(rtp_info, receive_timestamp, type);
return;
}
void InitialDelayManager::RecordLastPacket(const WebRtcRTPHeader& rtp_info,
uint32_t receive_timestamp,
PacketType type) {
last_packet_type_ = type;
last_receive_timestamp_ = receive_timestamp;
memcpy(&last_packet_rtp_info_, &rtp_info, sizeof(rtp_info));
}
void InitialDelayManager::LatePackets(
uint32_t timestamp_now, SyncStream* sync_stream) {
assert(sync_stream);
sync_stream->num_sync_packets = 0;
// If there is no estimate of timestamp increment, |timestamp_step_|, then
// we cannot estimate the number of late packets.
// If the last packet has been CNG, estimating late packets is not meaningful,
// as a CNG packet is on unknown length.
// We can set a higher threshold if the last packet is CNG and continue
// execution, but this is how ACM1 code was written.
if (timestamp_step_ <= 0 ||
last_packet_type_ == kCngPacket ||
last_packet_type_ == kUndefinedPacket ||
audio_payload_type_ == kInvalidPayloadType) // No audio packet received.
return;
int num_late_packets = (timestamp_now - last_receive_timestamp_) /
timestamp_step_;
if (num_late_packets < late_packet_threshold_)
return;
int sync_offset = 1; // One gap at the end of the sync-stream.
if (last_packet_type_ != kSyncPacket) {
++sync_offset; // One more gap at the beginning of the sync-stream.
--num_late_packets;
}
uint32_t timestamp_update = sync_offset * timestamp_step_;
sync_stream->num_sync_packets = num_late_packets;
if (num_late_packets == 0)
return;
// Build the first sync-packet in the sync-stream.
memcpy(&sync_stream->rtp_info, &last_packet_rtp_info_,
sizeof(last_packet_rtp_info_));
// Increase sequence number and timestamps.
sync_stream->rtp_info.header.sequenceNumber += sync_offset;
sync_stream->rtp_info.header.timestamp += timestamp_update;
sync_stream->receive_timestamp = last_receive_timestamp_ + timestamp_update;
sync_stream->timestamp_step = timestamp_step_;
// Sync-packets have audio payload-type.
sync_stream->rtp_info.header.payloadType = audio_payload_type_;
uint16_t sequence_number_update = num_late_packets + sync_offset - 1;
timestamp_update = sequence_number_update * timestamp_step_;
// Fake the last RTP, assuming the caller will inject the whole sync-stream.
last_packet_rtp_info_.header.timestamp += timestamp_update;
last_packet_rtp_info_.header.sequenceNumber += sequence_number_update;
last_packet_rtp_info_.header.payloadType = audio_payload_type_;
last_receive_timestamp_ += timestamp_update;
last_packet_type_ = kSyncPacket;
return;
}
bool InitialDelayManager::GetPlayoutTimestamp(uint32_t* playout_timestamp) {
if (!buffering_) {
return false;
}
*playout_timestamp = playout_timestamp_;
return true;
}
void InitialDelayManager::DisableBuffering() {
buffering_ = false;
}
void InitialDelayManager::UpdatePlayoutTimestamp(
const RTPHeader& current_header, int sample_rate_hz) {
playout_timestamp_ = current_header.timestamp - static_cast<uint32_t>(
initial_delay_ms_ * sample_rate_hz / 1000);
}
} // namespace acm2
} // namespace webrtc