| /* |
| * Copyright (c) 2018 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include "modules/congestion_controller/bbr/bbr_network_controller.h" |
| |
| #include <algorithm> |
| #include <array> |
| #include <string> |
| #include <vector> |
| |
| #include "absl/base/macros.h" |
| #include "rtc_base/checks.h" |
| #include "rtc_base/logging.h" |
| #include "system_wrappers/include/field_trial.h" |
| |
| namespace webrtc { |
| namespace bbr { |
| namespace { |
| |
| // If greater than zero, mean RTT variation is multiplied by the specified |
| // factor and added to the congestion window limit. |
| const double kBbrRttVariationWeight = 0.0f; |
| |
| // Congestion window gain for QUIC BBR during PROBE_BW phase. |
| const double kProbeBWCongestionWindowGain = 2.0f; |
| |
| // The maximum packet size of any QUIC packet, based on ethernet's max size, |
| // minus the IP and UDP headers. IPv6 has a 40 byte header, UDP adds an |
| // additional 8 bytes. This is a total overhead of 48 bytes. Ethernet's |
| // max packet size is 1500 bytes, 1500 - 48 = 1452. |
| const DataSize kMaxPacketSize = DataSize::Bytes<1452>(); |
| |
| // Default maximum packet size used in the Linux TCP implementation. |
| // Used in QUIC for congestion window computations in bytes. |
| constexpr DataSize kDefaultTCPMSS = DataSize::Bytes<1460>(); |
| // Constants based on TCP defaults. |
| constexpr DataSize kMaxSegmentSize = kDefaultTCPMSS; |
| |
| // The gain used for the slow start, equal to 2/ln(2). |
| const double kHighGain = 2.885f; |
| // The gain used in STARTUP after loss has been detected. |
| // 1.5 is enough to allow for 25% exogenous loss and still observe a 25% growth |
| // in measured bandwidth. |
| const double kStartupAfterLossGain = 1.5; |
| // The gain used to drain the queue after the slow start. |
| const double kDrainGain = 1.f / kHighGain; |
| |
| // The length of the gain cycle. |
| const size_t kGainCycleLength = 8; |
| // The size of the bandwidth filter window, in round-trips. |
| const BbrRoundTripCount kBandwidthWindowSize = kGainCycleLength + 2; |
| |
| // The time after which the current min_rtt value expires. |
| constexpr int64_t kMinRttExpirySeconds = 10; |
| // The minimum time the connection can spend in PROBE_RTT mode. |
| constexpr int64_t kProbeRttTimeMs = 200; |
| // If the bandwidth does not increase by the factor of |kStartupGrowthTarget| |
| // within |kRoundTripsWithoutGrowthBeforeExitingStartup| rounds, the connection |
| // will exit the STARTUP mode. |
| const double kStartupGrowthTarget = 1.25; |
| // Coefficient to determine if a new RTT is sufficiently similar to min_rtt that |
| // we don't need to enter PROBE_RTT. |
| const double kSimilarMinRttThreshold = 1.125; |
| |
| constexpr int64_t kInitialBandwidthKbps = 300; |
| |
| const int64_t kInitialCongestionWindowPackets = 32; |
| // The minimum CWND to ensure delayed acks don't reduce bandwidth measurements. |
| // Does not inflate the pacing rate. |
| const int64_t kDefaultMinCongestionWindowPackets = 4; |
| const int64_t kDefaultMaxCongestionWindowPackets = 2000; |
| |
| const char kBbrConfigTrial[] = "WebRTC-BweBbrConfig"; |
| |
| } // namespace |
| |
| BbrNetworkController::BbrControllerConfig::BbrControllerConfig( |
| std::string field_trial) |
| : probe_bw_pacing_gain_offset("probe_bw_pacing_gain_offset", 0.25), |
| encoder_rate_gain("encoder_rate_gain", 1), |
| encoder_rate_gain_in_probe_rtt("encoder_rate_gain_in_probe_rtt", 1), |
| exit_startup_rtt_threshold("exit_startup_rtt_threshold", |
| TimeDelta::PlusInfinity()), |
| initial_congestion_window( |
| "initial_cwin", |
| kInitialCongestionWindowPackets * kDefaultTCPMSS), |
| min_congestion_window( |
| "min_cwin", |
| kDefaultMinCongestionWindowPackets * kDefaultTCPMSS), |
| max_congestion_window( |
| "max_cwin", |
| kDefaultMaxCongestionWindowPackets * kDefaultTCPMSS), |
| probe_rtt_congestion_window_gain("probe_rtt_cwin_gain", 0.75), |
| pacing_rate_as_target("pacing_rate_as_target", false), |
| exit_startup_on_loss("exit_startup_on_loss", true), |
| num_startup_rtts("num_startup_rtts", 3), |
| rate_based_recovery("rate_based_recovery", false), |
| max_aggregation_bytes_multiplier("max_aggregation_bytes_multiplier", 0), |
| slower_startup("slower_startup", false), |
| rate_based_startup("rate_based_startup", false), |
| initial_conservation_in_startup("initial_conservation", |
| CONSERVATION, |
| { |
| {"NOT_IN_RECOVERY", NOT_IN_RECOVERY}, |
| {"CONSERVATION", CONSERVATION}, |
| {"MEDIUM_GROWTH", MEDIUM_GROWTH}, |
| {"GROWTH", GROWTH}, |
| }), |
| fully_drain_queue("fully_drain_queue", false), |
| max_ack_height_window_multiplier("max_ack_height_window_multiplier", 1), |
| probe_rtt_based_on_bdp("probe_rtt_based_on_bdp", false), |
| probe_rtt_skipped_if_similar_rtt("probe_rtt_skipped_if_similar_rtt", |
| false), |
| probe_rtt_disabled_if_app_limited("probe_rtt_disabled_if_app_limited", |
| false) { |
| ParseFieldTrial( |
| { |
| &exit_startup_on_loss, |
| &encoder_rate_gain, |
| &encoder_rate_gain_in_probe_rtt, |
| &exit_startup_rtt_threshold, |
| &fully_drain_queue, |
| &initial_congestion_window, |
| &initial_conservation_in_startup, |
| &max_ack_height_window_multiplier, |
| &max_aggregation_bytes_multiplier, |
| &max_congestion_window, |
| &min_congestion_window, |
| &num_startup_rtts, |
| &pacing_rate_as_target, |
| &probe_bw_pacing_gain_offset, |
| &probe_rtt_based_on_bdp, |
| &probe_rtt_congestion_window_gain, |
| &probe_rtt_disabled_if_app_limited, |
| &probe_rtt_skipped_if_similar_rtt, |
| &rate_based_recovery, |
| &rate_based_startup, |
| &slower_startup, |
| }, |
| field_trial); |
| } |
| BbrNetworkController::BbrControllerConfig::~BbrControllerConfig() = default; |
| BbrNetworkController::BbrControllerConfig::BbrControllerConfig( |
| const BbrControllerConfig&) = default; |
| BbrNetworkController::BbrControllerConfig |
| BbrNetworkController::BbrControllerConfig::FromTrial() { |
| return BbrControllerConfig( |
| webrtc::field_trial::FindFullName(kBbrConfigTrial)); |
| } |
| |
| BbrNetworkController::DebugState::DebugState(const BbrNetworkController& sender) |
| : mode(sender.mode_), |
| max_bandwidth(sender.max_bandwidth_.GetBest()), |
| round_trip_count(sender.round_trip_count_), |
| gain_cycle_index(sender.cycle_current_offset_), |
| congestion_window(sender.congestion_window_), |
| is_at_full_bandwidth(sender.is_at_full_bandwidth_), |
| bandwidth_at_last_round(sender.bandwidth_at_last_round_), |
| rounds_without_bandwidth_gain(sender.rounds_without_bandwidth_gain_), |
| min_rtt(sender.min_rtt_), |
| min_rtt_timestamp(sender.min_rtt_timestamp_), |
| recovery_state(sender.recovery_state_), |
| recovery_window(sender.recovery_window_), |
| last_sample_is_app_limited(sender.last_sample_is_app_limited_), |
| end_of_app_limited_phase(sender.sampler_->end_of_app_limited_phase()) {} |
| |
| BbrNetworkController::DebugState::DebugState(const DebugState& state) = default; |
| |
| BbrNetworkController::BbrNetworkController(NetworkControllerConfig config) |
| : config_(BbrControllerConfig::FromTrial()), |
| rtt_stats_(), |
| random_(10), |
| loss_rate_(), |
| mode_(STARTUP), |
| sampler_(new BandwidthSampler()), |
| round_trip_count_(0), |
| last_sent_packet_(0), |
| current_round_trip_end_(0), |
| max_bandwidth_(kBandwidthWindowSize, DataRate::Zero(), 0), |
| default_bandwidth_(DataRate::kbps(kInitialBandwidthKbps)), |
| max_ack_height_(kBandwidthWindowSize, DataSize::Zero(), 0), |
| aggregation_epoch_start_time_(), |
| aggregation_epoch_bytes_(DataSize::Zero()), |
| bytes_acked_since_queue_drained_(DataSize::Zero()), |
| max_aggregation_bytes_multiplier_(0), |
| min_rtt_(TimeDelta::Zero()), |
| last_rtt_(TimeDelta::Zero()), |
| min_rtt_timestamp_(Timestamp::MinusInfinity()), |
| congestion_window_(config_.initial_congestion_window), |
| initial_congestion_window_(config_.initial_congestion_window), |
| min_congestion_window_(config_.min_congestion_window), |
| max_congestion_window_(config_.max_congestion_window), |
| pacing_rate_(DataRate::Zero()), |
| pacing_gain_(1), |
| congestion_window_gain_constant_(kProbeBWCongestionWindowGain), |
| rtt_variance_weight_(kBbrRttVariationWeight), |
| cycle_current_offset_(0), |
| last_cycle_start_(Timestamp::MinusInfinity()), |
| is_at_full_bandwidth_(false), |
| rounds_without_bandwidth_gain_(0), |
| bandwidth_at_last_round_(DataRate::Zero()), |
| exiting_quiescence_(false), |
| exit_probe_rtt_at_(), |
| probe_rtt_round_passed_(false), |
| last_sample_is_app_limited_(false), |
| recovery_state_(NOT_IN_RECOVERY), |
| end_recovery_at_(), |
| recovery_window_(max_congestion_window_), |
| app_limited_since_last_probe_rtt_(false), |
| min_rtt_since_last_probe_rtt_(TimeDelta::PlusInfinity()) { |
| RTC_LOG(LS_INFO) << "Creating BBR controller"; |
| if (config.constraints.starting_rate) |
| default_bandwidth_ = *config.constraints.starting_rate; |
| constraints_ = config.constraints; |
| Reset(); |
| } |
| |
| BbrNetworkController::~BbrNetworkController() {} |
| |
| void BbrNetworkController::Reset() { |
| round_trip_count_ = 0; |
| rounds_without_bandwidth_gain_ = 0; |
| if (config_.num_startup_rtts > 0) { |
| is_at_full_bandwidth_ = false; |
| EnterStartupMode(); |
| } else { |
| is_at_full_bandwidth_ = true; |
| EnterProbeBandwidthMode(constraints_->at_time); |
| } |
| } |
| |
| NetworkControlUpdate BbrNetworkController::CreateRateUpdate( |
| Timestamp at_time) const { |
| DataRate bandwidth = BandwidthEstimate(); |
| if (bandwidth.IsZero()) |
| bandwidth = default_bandwidth_; |
| TimeDelta rtt = GetMinRtt(); |
| DataRate pacing_rate = PacingRate(); |
| DataRate target_rate = |
| config_.pacing_rate_as_target ? pacing_rate : bandwidth; |
| |
| if (mode_ == PROBE_RTT) |
| target_rate = target_rate * config_.encoder_rate_gain_in_probe_rtt; |
| else |
| target_rate = target_rate * config_.encoder_rate_gain; |
| target_rate = std::min(target_rate, pacing_rate); |
| |
| if (constraints_) { |
| if (constraints_->max_data_rate) { |
| target_rate = std::min(target_rate, *constraints_->max_data_rate); |
| pacing_rate = std::min(pacing_rate, *constraints_->max_data_rate); |
| } |
| if (constraints_->min_data_rate) { |
| target_rate = std::max(target_rate, *constraints_->min_data_rate); |
| pacing_rate = std::max(pacing_rate, *constraints_->min_data_rate); |
| } |
| } |
| |
| NetworkControlUpdate update; |
| |
| TargetTransferRate target_rate_msg; |
| target_rate_msg.network_estimate.at_time = at_time; |
| target_rate_msg.network_estimate.round_trip_time = rtt; |
| |
| // TODO(srte): Fill in field below with proper value. |
| target_rate_msg.network_estimate.loss_rate_ratio = 0; |
| // In in PROBE_BW, target bandwidth is expected to vary over the cycle period. |
| // In other modes the is no given period, therefore the same value as in |
| // PROBE_BW is used for consistency. |
| target_rate_msg.network_estimate.bwe_period = |
| rtt * static_cast<int64_t>(kGainCycleLength); |
| |
| target_rate_msg.target_rate = target_rate; |
| target_rate_msg.at_time = at_time; |
| update.target_rate = target_rate_msg; |
| |
| PacerConfig pacer_config; |
| // A small time window ensures an even pacing rate. |
| pacer_config.time_window = rtt * 0.25; |
| pacer_config.data_window = pacer_config.time_window * pacing_rate; |
| |
| if (IsProbingForMoreBandwidth()) |
| pacer_config.pad_window = pacer_config.data_window; |
| else |
| pacer_config.pad_window = DataSize::Zero(); |
| |
| pacer_config.at_time = at_time; |
| update.pacer_config = pacer_config; |
| |
| update.congestion_window = GetCongestionWindow(); |
| return update; |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnNetworkAvailability( |
| NetworkAvailability msg) { |
| Reset(); |
| rtt_stats_.OnConnectionMigration(); |
| return CreateRateUpdate(msg.at_time); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnNetworkRouteChange( |
| NetworkRouteChange msg) { |
| constraints_ = msg.constraints; |
| Reset(); |
| if (msg.constraints.starting_rate) |
| default_bandwidth_ = *msg.constraints.starting_rate; |
| |
| rtt_stats_.OnConnectionMigration(); |
| return CreateRateUpdate(msg.at_time); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnProcessInterval( |
| ProcessInterval msg) { |
| return CreateRateUpdate(msg.at_time); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnStreamsConfig(StreamsConfig msg) { |
| return NetworkControlUpdate(); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnTargetRateConstraints( |
| TargetRateConstraints msg) { |
| constraints_ = msg; |
| return CreateRateUpdate(msg.at_time); |
| } |
| |
| bool BbrNetworkController::InSlowStart() const { |
| return mode_ == STARTUP; |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnSentPacket(SentPacket msg) { |
| last_sent_packet_ = msg.sequence_number; |
| |
| if (msg.data_in_flight.IsZero() && sampler_->is_app_limited()) { |
| exiting_quiescence_ = true; |
| } |
| |
| if (!aggregation_epoch_start_time_) { |
| aggregation_epoch_start_time_ = msg.send_time; |
| } |
| |
| sampler_->OnPacketSent(msg.send_time, msg.sequence_number, msg.size, |
| msg.data_in_flight); |
| return NetworkControlUpdate(); |
| } |
| |
| bool BbrNetworkController::CanSend(DataSize bytes_in_flight) { |
| return bytes_in_flight < GetCongestionWindow(); |
| } |
| |
| DataRate BbrNetworkController::PacingRate() const { |
| if (pacing_rate_.IsZero()) { |
| return kHighGain * initial_congestion_window_ / GetMinRtt(); |
| } |
| return pacing_rate_; |
| } |
| |
| DataRate BbrNetworkController::BandwidthEstimate() const { |
| return max_bandwidth_.GetBest(); |
| } |
| |
| DataSize BbrNetworkController::GetCongestionWindow() const { |
| if (mode_ == PROBE_RTT) { |
| return ProbeRttCongestionWindow(); |
| } |
| |
| if (InRecovery() && !config_.rate_based_recovery && |
| !(config_.rate_based_startup && mode_ == STARTUP)) { |
| return std::min(congestion_window_, recovery_window_); |
| } |
| |
| return congestion_window_; |
| } |
| |
| double BbrNetworkController::GetPacingGain(int round_offset) const { |
| if (round_offset == 0) |
| return 1 + config_.probe_bw_pacing_gain_offset; |
| else if (round_offset == 1) |
| return 1 - config_.probe_bw_pacing_gain_offset; |
| else |
| return 1; |
| } |
| |
| bool BbrNetworkController::InRecovery() const { |
| return recovery_state_ != NOT_IN_RECOVERY; |
| } |
| |
| bool BbrNetworkController::IsProbingForMoreBandwidth() const { |
| return (mode_ == PROBE_BW && pacing_gain_ > 1) || mode_ == STARTUP; |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnTransportPacketsFeedback( |
| TransportPacketsFeedback msg) { |
| if (msg.packet_feedbacks.empty()) |
| return NetworkControlUpdate(); |
| |
| Timestamp feedback_recv_time = msg.feedback_time; |
| SentPacket last_sent_packet = msg.PacketsWithFeedback().back().sent_packet; |
| |
| Timestamp send_time = last_sent_packet.send_time; |
| TimeDelta send_delta = feedback_recv_time - send_time; |
| rtt_stats_.UpdateRtt(send_delta, TimeDelta::Zero(), feedback_recv_time); |
| |
| const DataSize total_data_acked_before = sampler_->total_data_acked(); |
| |
| bool is_round_start = false; |
| bool min_rtt_expired = false; |
| |
| std::vector<PacketResult> lost_packets = msg.LostWithSendInfo(); |
| DiscardLostPackets(lost_packets); |
| |
| std::vector<PacketResult> acked_packets = msg.ReceivedWithSendInfo(); |
| |
| int packets_sent = |
| static_cast<int>(lost_packets.size() + acked_packets.size()); |
| int packets_lost = static_cast<int>(lost_packets.size()); |
| loss_rate_.UpdateWithLossStatus(msg.feedback_time.ms(), packets_sent, |
| packets_lost); |
| |
| // Input the new data into the BBR model of the connection. |
| if (!acked_packets.empty()) { |
| int64_t last_acked_packet = |
| acked_packets.rbegin()->sent_packet.sequence_number; |
| |
| is_round_start = UpdateRoundTripCounter(last_acked_packet); |
| min_rtt_expired = |
| UpdateBandwidthAndMinRtt(msg.feedback_time, acked_packets); |
| UpdateRecoveryState(last_acked_packet, !lost_packets.empty(), |
| is_round_start); |
| |
| const DataSize data_acked = |
| sampler_->total_data_acked() - total_data_acked_before; |
| |
| UpdateAckAggregationBytes(msg.feedback_time, data_acked); |
| if (max_aggregation_bytes_multiplier_ > 0) { |
| if (msg.data_in_flight <= |
| 1.25 * GetTargetCongestionWindow(pacing_gain_)) { |
| bytes_acked_since_queue_drained_ = DataSize::Zero(); |
| } else { |
| bytes_acked_since_queue_drained_ += data_acked; |
| } |
| } |
| } |
| |
| // Handle logic specific to PROBE_BW mode. |
| if (mode_ == PROBE_BW) { |
| UpdateGainCyclePhase(msg.feedback_time, msg.prior_in_flight, |
| !lost_packets.empty()); |
| } |
| |
| // Handle logic specific to STARTUP and DRAIN modes. |
| if (is_round_start && !is_at_full_bandwidth_) { |
| CheckIfFullBandwidthReached(); |
| } |
| MaybeExitStartupOrDrain(msg); |
| |
| // Handle logic specific to PROBE_RTT. |
| MaybeEnterOrExitProbeRtt(msg, is_round_start, min_rtt_expired); |
| |
| // Calculate number of packets acked and lost. |
| DataSize data_acked = sampler_->total_data_acked() - total_data_acked_before; |
| DataSize data_lost = DataSize::Zero(); |
| for (const PacketResult& packet : lost_packets) { |
| data_lost += packet.sent_packet.size; |
| } |
| |
| // After the model is updated, recalculate the pacing rate and congestion |
| // window. |
| CalculatePacingRate(); |
| CalculateCongestionWindow(data_acked); |
| CalculateRecoveryWindow(data_acked, data_lost, msg.data_in_flight); |
| // Cleanup internal state. |
| if (!acked_packets.empty()) { |
| sampler_->RemoveObsoletePackets( |
| acked_packets.back().sent_packet.sequence_number); |
| } |
| return CreateRateUpdate(msg.feedback_time); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnRemoteBitrateReport( |
| RemoteBitrateReport msg) { |
| return NetworkControlUpdate(); |
| } |
| NetworkControlUpdate BbrNetworkController::OnRoundTripTimeUpdate( |
| RoundTripTimeUpdate msg) { |
| return NetworkControlUpdate(); |
| } |
| NetworkControlUpdate BbrNetworkController::OnTransportLossReport( |
| TransportLossReport msg) { |
| return NetworkControlUpdate(); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnReceivedPacket( |
| ReceivedPacket msg) { |
| return NetworkControlUpdate(); |
| } |
| |
| NetworkControlUpdate BbrNetworkController::OnNetworkStateEstimate( |
| NetworkStateEstimate msg) { |
| return NetworkControlUpdate(); |
| } |
| |
| TimeDelta BbrNetworkController::GetMinRtt() const { |
| return !min_rtt_.IsZero() ? min_rtt_ |
| : TimeDelta::Micros(rtt_stats_.initial_rtt_us()); |
| } |
| |
| DataSize BbrNetworkController::GetTargetCongestionWindow(double gain) const { |
| DataSize bdp = GetMinRtt() * BandwidthEstimate(); |
| DataSize congestion_window = gain * bdp; |
| |
| // BDP estimate will be zero if no bandwidth samples are available yet. |
| if (congestion_window.IsZero()) { |
| congestion_window = gain * initial_congestion_window_; |
| } |
| |
| return std::max(congestion_window, min_congestion_window_); |
| } |
| |
| DataSize BbrNetworkController::ProbeRttCongestionWindow() const { |
| if (config_.probe_rtt_based_on_bdp) { |
| return GetTargetCongestionWindow(config_.probe_rtt_congestion_window_gain); |
| } |
| return min_congestion_window_; |
| } |
| |
| void BbrNetworkController::EnterStartupMode() { |
| mode_ = STARTUP; |
| pacing_gain_ = kHighGain; |
| congestion_window_gain_ = kHighGain; |
| } |
| |
| void BbrNetworkController::EnterProbeBandwidthMode(Timestamp now) { |
| mode_ = PROBE_BW; |
| congestion_window_gain_ = congestion_window_gain_constant_; |
| |
| // Pick a random offset for the gain cycle out of {0, 2..7} range. 1 is |
| // excluded because in that case increased gain and decreased gain would not |
| // follow each other. |
| cycle_current_offset_ = random_.Rand(kGainCycleLength - 2); |
| if (cycle_current_offset_ >= 1) { |
| cycle_current_offset_ += 1; |
| } |
| |
| last_cycle_start_ = now; |
| pacing_gain_ = GetPacingGain(cycle_current_offset_); |
| } |
| |
| void BbrNetworkController::DiscardLostPackets( |
| const std::vector<PacketResult>& lost_packets) { |
| for (const PacketResult& packet : lost_packets) { |
| sampler_->OnPacketLost(packet.sent_packet.sequence_number); |
| } |
| } |
| |
| bool BbrNetworkController::UpdateRoundTripCounter(int64_t last_acked_packet) { |
| if (last_acked_packet > current_round_trip_end_) { |
| round_trip_count_++; |
| current_round_trip_end_ = last_sent_packet_; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool BbrNetworkController::UpdateBandwidthAndMinRtt( |
| Timestamp now, |
| const std::vector<PacketResult>& acked_packets) { |
| TimeDelta sample_rtt = TimeDelta::PlusInfinity(); |
| for (const auto& packet : acked_packets) { |
| BandwidthSample bandwidth_sample = |
| sampler_->OnPacketAcknowledged(now, packet.sent_packet.sequence_number); |
| last_sample_is_app_limited_ = bandwidth_sample.is_app_limited; |
| if (!bandwidth_sample.rtt.IsZero()) { |
| sample_rtt = std::min(sample_rtt, bandwidth_sample.rtt); |
| } |
| |
| if (!bandwidth_sample.is_app_limited || |
| bandwidth_sample.bandwidth > BandwidthEstimate()) { |
| max_bandwidth_.Update(bandwidth_sample.bandwidth, round_trip_count_); |
| } |
| } |
| |
| // If none of the RTT samples are valid, return immediately. |
| if (sample_rtt.IsInfinite()) { |
| return false; |
| } |
| |
| last_rtt_ = sample_rtt; |
| min_rtt_since_last_probe_rtt_ = |
| std::min(min_rtt_since_last_probe_rtt_, sample_rtt); |
| |
| const TimeDelta kMinRttExpiry = TimeDelta::Seconds(kMinRttExpirySeconds); |
| // Do not expire min_rtt if none was ever available. |
| bool min_rtt_expired = |
| !min_rtt_.IsZero() && (now > (min_rtt_timestamp_ + kMinRttExpiry)); |
| |
| if (min_rtt_expired || sample_rtt < min_rtt_ || min_rtt_.IsZero()) { |
| if (ShouldExtendMinRttExpiry()) { |
| min_rtt_expired = false; |
| } else { |
| min_rtt_ = sample_rtt; |
| } |
| min_rtt_timestamp_ = now; |
| // Reset since_last_probe_rtt fields. |
| min_rtt_since_last_probe_rtt_ = TimeDelta::PlusInfinity(); |
| app_limited_since_last_probe_rtt_ = false; |
| } |
| |
| return min_rtt_expired; |
| } |
| |
| bool BbrNetworkController::ShouldExtendMinRttExpiry() const { |
| if (config_.probe_rtt_disabled_if_app_limited && |
| app_limited_since_last_probe_rtt_) { |
| // Extend the current min_rtt if we've been app limited recently. |
| return true; |
| } |
| const bool min_rtt_increased_since_last_probe = |
| min_rtt_since_last_probe_rtt_ > min_rtt_ * kSimilarMinRttThreshold; |
| if (config_.probe_rtt_skipped_if_similar_rtt && |
| app_limited_since_last_probe_rtt_ && |
| !min_rtt_increased_since_last_probe) { |
| // Extend the current min_rtt if we've been app limited recently and an rtt |
| // has been measured in that time that's less than 12.5% more than the |
| // current min_rtt. |
| return true; |
| } |
| return false; |
| } |
| |
| void BbrNetworkController::UpdateGainCyclePhase(Timestamp now, |
| DataSize prior_in_flight, |
| bool has_losses) { |
| // In most cases, the cycle is advanced after an RTT passes. |
| bool should_advance_gain_cycling = now - last_cycle_start_ > GetMinRtt(); |
| |
| // If the pacing gain is above 1.0, the connection is trying to probe the |
| // bandwidth by increasing the number of bytes in flight to at least |
| // pacing_gain * BDP. Make sure that it actually reaches the target, as long |
| // as there are no losses suggesting that the buffers are not able to hold |
| // that much. |
| if (pacing_gain_ > 1.0 && !has_losses && |
| prior_in_flight < GetTargetCongestionWindow(pacing_gain_)) { |
| should_advance_gain_cycling = false; |
| } |
| |
| // If pacing gain is below 1.0, the connection is trying to drain the extra |
| // queue which could have been incurred by probing prior to it. If the number |
| // of bytes in flight falls down to the estimated BDP value earlier, conclude |
| // that the queue has been successfully drained and exit this cycle early. |
| if (pacing_gain_ < 1.0 && prior_in_flight <= GetTargetCongestionWindow(1)) { |
| should_advance_gain_cycling = true; |
| } |
| |
| if (should_advance_gain_cycling) { |
| cycle_current_offset_ = (cycle_current_offset_ + 1) % kGainCycleLength; |
| last_cycle_start_ = now; |
| // Stay in low gain mode until the target BDP is hit. |
| // Low gain mode will be exited immediately when the target BDP is achieved. |
| if (config_.fully_drain_queue && pacing_gain_ < 1 && |
| GetPacingGain(cycle_current_offset_) == 1 && |
| prior_in_flight > GetTargetCongestionWindow(1)) { |
| return; |
| } |
| pacing_gain_ = GetPacingGain(cycle_current_offset_); |
| } |
| } |
| |
| void BbrNetworkController::CheckIfFullBandwidthReached() { |
| if (last_sample_is_app_limited_) { |
| return; |
| } |
| |
| DataRate target = bandwidth_at_last_round_ * kStartupGrowthTarget; |
| if (BandwidthEstimate() >= target) { |
| bandwidth_at_last_round_ = BandwidthEstimate(); |
| rounds_without_bandwidth_gain_ = 0; |
| return; |
| } |
| |
| rounds_without_bandwidth_gain_++; |
| if ((rounds_without_bandwidth_gain_ >= config_.num_startup_rtts) || |
| (config_.exit_startup_on_loss && InRecovery())) { |
| is_at_full_bandwidth_ = true; |
| } |
| } |
| |
| void BbrNetworkController::MaybeExitStartupOrDrain( |
| const TransportPacketsFeedback& msg) { |
| TimeDelta exit_threshold = config_.exit_startup_rtt_threshold; |
| TimeDelta rtt_delta = last_rtt_ - min_rtt_; |
| if (mode_ == STARTUP && |
| (is_at_full_bandwidth_ || rtt_delta > exit_threshold)) { |
| if (rtt_delta > exit_threshold) |
| RTC_LOG(LS_INFO) << "Exiting startup due to rtt increase from: " |
| << ToString(min_rtt_) << " to:" << ToString(last_rtt_) |
| << " > " << ToString(min_rtt_ + exit_threshold); |
| mode_ = DRAIN; |
| pacing_gain_ = kDrainGain; |
| congestion_window_gain_ = kHighGain; |
| } |
| if (mode_ == DRAIN && msg.data_in_flight <= GetTargetCongestionWindow(1)) { |
| EnterProbeBandwidthMode(msg.feedback_time); |
| } |
| } |
| |
| void BbrNetworkController::MaybeEnterOrExitProbeRtt( |
| const TransportPacketsFeedback& msg, |
| bool is_round_start, |
| bool min_rtt_expired) { |
| if (min_rtt_expired && !exiting_quiescence_ && mode_ != PROBE_RTT) { |
| mode_ = PROBE_RTT; |
| pacing_gain_ = 1; |
| // Do not decide on the time to exit PROBE_RTT until the |bytes_in_flight| |
| // is at the target small value. |
| exit_probe_rtt_at_.reset(); |
| } |
| |
| if (mode_ == PROBE_RTT) { |
| sampler_->OnAppLimited(); |
| |
| if (!exit_probe_rtt_at_) { |
| // If the window has reached the appropriate size, schedule exiting |
| // PROBE_RTT. The CWND during PROBE_RTT is kMinimumCongestionWindow, but |
| // we allow an extra packet since QUIC checks CWND before sending a |
| // packet. |
| if (msg.data_in_flight < ProbeRttCongestionWindow() + kMaxPacketSize) { |
| exit_probe_rtt_at_ = |
| msg.feedback_time + TimeDelta::Millis(kProbeRttTimeMs); |
| probe_rtt_round_passed_ = false; |
| } |
| } else { |
| if (is_round_start) { |
| probe_rtt_round_passed_ = true; |
| } |
| if (msg.feedback_time >= *exit_probe_rtt_at_ && probe_rtt_round_passed_) { |
| min_rtt_timestamp_ = msg.feedback_time; |
| if (!is_at_full_bandwidth_) { |
| EnterStartupMode(); |
| } else { |
| EnterProbeBandwidthMode(msg.feedback_time); |
| } |
| } |
| } |
| } |
| |
| exiting_quiescence_ = false; |
| } |
| |
| void BbrNetworkController::UpdateRecoveryState(int64_t last_acked_packet, |
| bool has_losses, |
| bool is_round_start) { |
| // Exit recovery when there are no losses for a round. |
| if (has_losses) { |
| end_recovery_at_ = last_sent_packet_; |
| } |
| |
| switch (recovery_state_) { |
| case NOT_IN_RECOVERY: |
| // Enter conservation on the first loss. |
| if (has_losses) { |
| recovery_state_ = CONSERVATION; |
| if (mode_ == STARTUP) { |
| recovery_state_ = config_.initial_conservation_in_startup; |
| } |
| // This will cause the |recovery_window_| to be set to the correct |
| // value in CalculateRecoveryWindow(). |
| recovery_window_ = DataSize::Zero(); |
| // Since the conservation phase is meant to be lasting for a whole |
| // round, extend the current round as if it were started right now. |
| current_round_trip_end_ = last_sent_packet_; |
| } |
| break; |
| |
| case CONSERVATION: |
| case MEDIUM_GROWTH: |
| if (is_round_start) { |
| recovery_state_ = GROWTH; |
| } |
| ABSL_FALLTHROUGH_INTENDED; |
| case GROWTH: |
| // Exit recovery if appropriate. |
| if (!has_losses && |
| (!end_recovery_at_ || last_acked_packet > *end_recovery_at_)) { |
| recovery_state_ = NOT_IN_RECOVERY; |
| } |
| |
| break; |
| } |
| } |
| |
| void BbrNetworkController::UpdateAckAggregationBytes( |
| Timestamp ack_time, |
| DataSize newly_acked_bytes) { |
| if (!aggregation_epoch_start_time_) { |
| RTC_LOG(LS_ERROR) |
| << "Received feedback before information about sent packets."; |
| RTC_DCHECK(aggregation_epoch_start_time_.has_value()); |
| return; |
| } |
| // Compute how many bytes are expected to be delivered, assuming max bandwidth |
| // is correct. |
| DataSize expected_bytes_acked = |
| max_bandwidth_.GetBest() * (ack_time - *aggregation_epoch_start_time_); |
| // Reset the current aggregation epoch as soon as the ack arrival rate is less |
| // than or equal to the max bandwidth. |
| if (aggregation_epoch_bytes_ <= expected_bytes_acked) { |
| // Reset to start measuring a new aggregation epoch. |
| aggregation_epoch_bytes_ = newly_acked_bytes; |
| aggregation_epoch_start_time_ = ack_time; |
| return; |
| } |
| |
| // Compute how many extra bytes were delivered vs max bandwidth. |
| // Include the bytes most recently acknowledged to account for stretch acks. |
| aggregation_epoch_bytes_ += newly_acked_bytes; |
| max_ack_height_.Update(aggregation_epoch_bytes_ - expected_bytes_acked, |
| round_trip_count_); |
| } |
| |
| void BbrNetworkController::CalculatePacingRate() { |
| if (BandwidthEstimate().IsZero()) { |
| return; |
| } |
| |
| DataRate target_rate = pacing_gain_ * BandwidthEstimate(); |
| if (config_.rate_based_recovery && InRecovery()) { |
| pacing_rate_ = pacing_gain_ * max_bandwidth_.GetThirdBest(); |
| } |
| if (is_at_full_bandwidth_) { |
| pacing_rate_ = target_rate; |
| return; |
| } |
| |
| // Pace at the rate of initial_window / RTT as soon as RTT measurements are |
| // available. |
| if (pacing_rate_.IsZero() && !rtt_stats_.min_rtt().IsZero()) { |
| pacing_rate_ = initial_congestion_window_ / rtt_stats_.min_rtt(); |
| return; |
| } |
| // Slow the pacing rate in STARTUP once loss has ever been detected. |
| const bool has_ever_detected_loss = end_recovery_at_.has_value(); |
| if (config_.slower_startup && has_ever_detected_loss) { |
| pacing_rate_ = kStartupAfterLossGain * BandwidthEstimate(); |
| return; |
| } |
| |
| // Do not decrease the pacing rate during the startup. |
| pacing_rate_ = std::max(pacing_rate_, target_rate); |
| } |
| |
| void BbrNetworkController::CalculateCongestionWindow(DataSize bytes_acked) { |
| if (mode_ == PROBE_RTT) { |
| return; |
| } |
| |
| DataSize target_window = GetTargetCongestionWindow(congestion_window_gain_); |
| |
| if (rtt_variance_weight_ > 0.f && !BandwidthEstimate().IsZero()) { |
| target_window += rtt_variance_weight_ * rtt_stats_.mean_deviation() * |
| BandwidthEstimate(); |
| } else if (max_aggregation_bytes_multiplier_ > 0 && is_at_full_bandwidth_) { |
| // Subtracting only half the bytes_acked_since_queue_drained ensures sending |
| // doesn't completely stop for a long period of time if the queue hasn't |
| // been drained recently. |
| if (max_aggregation_bytes_multiplier_ * max_ack_height_.GetBest() > |
| bytes_acked_since_queue_drained_ / 2) { |
| target_window += |
| max_aggregation_bytes_multiplier_ * max_ack_height_.GetBest() - |
| bytes_acked_since_queue_drained_ / 2; |
| } |
| } else if (is_at_full_bandwidth_) { |
| target_window += max_ack_height_.GetBest(); |
| } |
| |
| // Instead of immediately setting the target CWND as the new one, BBR grows |
| // the CWND towards |target_window| by only increasing it |bytes_acked| at a |
| // time. |
| if (is_at_full_bandwidth_) { |
| congestion_window_ = |
| std::min(target_window, congestion_window_ + bytes_acked); |
| } else if (congestion_window_ < target_window || |
| sampler_->total_data_acked() < initial_congestion_window_) { |
| // If the connection is not yet out of startup phase, do not decrease the |
| // window. |
| congestion_window_ = congestion_window_ + bytes_acked; |
| } |
| |
| // Enforce the limits on the congestion window. |
| congestion_window_ = std::max(congestion_window_, min_congestion_window_); |
| congestion_window_ = std::min(congestion_window_, max_congestion_window_); |
| } |
| |
| void BbrNetworkController::CalculateRecoveryWindow(DataSize bytes_acked, |
| DataSize bytes_lost, |
| DataSize bytes_in_flight) { |
| if (config_.rate_based_recovery || |
| (config_.rate_based_startup && mode_ == STARTUP)) { |
| return; |
| } |
| |
| if (recovery_state_ == NOT_IN_RECOVERY) { |
| return; |
| } |
| |
| // Set up the initial recovery window. |
| if (recovery_window_.IsZero()) { |
| recovery_window_ = bytes_in_flight + bytes_acked; |
| recovery_window_ = std::max(min_congestion_window_, recovery_window_); |
| return; |
| } |
| |
| // Remove losses from the recovery window, while accounting for a potential |
| // integer underflow. |
| recovery_window_ = recovery_window_ >= bytes_lost |
| ? recovery_window_ - bytes_lost |
| : kMaxSegmentSize; |
| |
| // In CONSERVATION mode, just subtracting losses is sufficient. In GROWTH, |
| // release additional |bytes_acked| to achieve a slow-start-like behavior. |
| // In MEDIUM_GROWTH, release |bytes_acked| / 2 to split the difference. |
| if (recovery_state_ == GROWTH) { |
| recovery_window_ += bytes_acked; |
| } else if (recovery_state_ == MEDIUM_GROWTH) { |
| recovery_window_ += bytes_acked / 2; |
| } |
| |
| // Sanity checks. Ensure that we always allow to send at least |
| // |bytes_acked| in response. |
| recovery_window_ = std::max(recovery_window_, bytes_in_flight + bytes_acked); |
| recovery_window_ = std::max(min_congestion_window_, recovery_window_); |
| } |
| |
| void BbrNetworkController::OnApplicationLimited(DataSize bytes_in_flight) { |
| if (bytes_in_flight >= GetCongestionWindow()) { |
| return; |
| } |
| |
| app_limited_since_last_probe_rtt_ = true; |
| sampler_->OnAppLimited(); |
| |
| RTC_LOG(LS_INFO) << "Becoming application limited. Last sent packet: " |
| << last_sent_packet_ |
| << ", CWND: " << ToString(GetCongestionWindow()); |
| } |
| } // namespace bbr |
| } // namespace webrtc |