Use backticks not vertical bars to denote variables in comments for /modules/pacing
Bug: webrtc:12338
Change-Id: Id3b5081cf73be31829d75d7ef34942c2259053da
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/227096
Reviewed-by: Harald Alvestrand <hta@webrtc.org>
Commit-Queue: Artem Titov <titovartem@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#34674}
diff --git a/modules/pacing/bitrate_prober.cc b/modules/pacing/bitrate_prober.cc
index 381a54d..ed4b776 100644
--- a/modules/pacing/bitrate_prober.cc
+++ b/modules/pacing/bitrate_prober.cc
@@ -164,7 +164,7 @@
}
// Probe size is recommended based on the probe bitrate required. We choose
-// a minimum of twice |kMinProbeDeltaMs| interval to allow scheduling to be
+// a minimum of twice `kMinProbeDeltaMs` interval to allow scheduling to be
// feasible.
DataSize BitrateProber::RecommendedMinProbeSize() const {
if (clusters_.empty()) {
diff --git a/modules/pacing/bitrate_prober.h b/modules/pacing/bitrate_prober.h
index 5a89aac..3ac431c 100644
--- a/modules/pacing/bitrate_prober.h
+++ b/modules/pacing/bitrate_prober.h
@@ -38,7 +38,7 @@
// Maximum amount of time each probe can be delayed.
FieldTrialParameter<TimeDelta> max_probe_delay;
// If NextProbeTime() is called with a delay higher than specified by
- // |max_probe_delay|, abort it.
+ // `max_probe_delay`, abort it.
FieldTrialParameter<bool> abort_delayed_probes;
};
@@ -61,14 +61,14 @@
// with.
void OnIncomingPacket(DataSize packet_size);
- // Create a cluster used to probe for |bitrate_bps| with |num_probes| number
+ // Create a cluster used to probe for `bitrate_bps` with `num_probes` number
// of probes.
void CreateProbeCluster(DataRate bitrate, Timestamp now, int cluster_id);
// Returns the time at which the next probe should be sent to get accurate
// probing. If probing is not desired at this time, Timestamp::PlusInfinity()
// will be returned.
- // TODO(bugs.webrtc.org/11780): Remove |now| argument when old mode is gone.
+ // TODO(bugs.webrtc.org/11780): Remove `now` argument when old mode is gone.
Timestamp NextProbeTime(Timestamp now) const;
// Information about the current probing cluster.
@@ -80,7 +80,7 @@
// Called to report to the prober that a probe has been sent. In case of
// multiple packets per probe, this call would be made at the end of sending
- // the last packet in probe. |size| is the total size of all packets in probe.
+ // the last packet in probe. `size` is the total size of all packets in probe.
void ProbeSent(Timestamp now, DataSize size);
private:
diff --git a/modules/pacing/paced_sender.h b/modules/pacing/paced_sender.h
index c819f3f..fe29bc5 100644
--- a/modules/pacing/paced_sender.h
+++ b/modules/pacing/paced_sender.h
@@ -57,7 +57,7 @@
// overshoots from the encoder.
static const float kDefaultPaceMultiplier;
- // TODO(bugs.webrtc.org/10937): Make the |process_thread| argument be non
+ // TODO(bugs.webrtc.org/10937): Make the `process_thread` argument be non
// optional once all callers have been updated.
PacedSender(Clock* clock,
PacketRouter* packet_router,
diff --git a/modules/pacing/pacing_controller.cc b/modules/pacing/pacing_controller.cc
index e0ace4e..27cfb92 100644
--- a/modules/pacing/pacing_controller.cc
+++ b/modules/pacing/pacing_controller.cc
@@ -346,7 +346,7 @@
// If probing is active, that always takes priority.
if (prober_.is_probing()) {
Timestamp probe_time = prober_.NextProbeTime(now);
- // |probe_time| == PlusInfinity indicates no probe scheduled.
+ // `probe_time` == PlusInfinity indicates no probe scheduled.
if (probe_time != Timestamp::PlusInfinity() && !probing_send_failure_) {
return probe_time;
}
diff --git a/modules/pacing/pacing_controller.h b/modules/pacing/pacing_controller.h
index b0bdfb2..38bb9e5 100644
--- a/modules/pacing/pacing_controller.h
+++ b/modules/pacing/pacing_controller.h
@@ -73,7 +73,7 @@
// Increasing this factor will result in lower delays in cases of bitrate
// overshoots from the encoder.
static const float kDefaultPaceMultiplier;
- // If no media or paused, wake up at least every |kPausedProcessIntervalMs| in
+ // If no media or paused, wake up at least every `kPausedProcessIntervalMs` in
// order to send a keep-alive packet so we don't get stuck in a bad state due
// to lack of feedback.
static const TimeDelta kPausedProcessInterval;
@@ -192,11 +192,11 @@
DataSize transport_overhead_per_packet_;
// TODO(webrtc:9716): Remove this when we are certain clocks are monotonic.
- // The last millisecond timestamp returned by |clock_|.
+ // The last millisecond timestamp returned by `clock_`.
mutable Timestamp last_timestamp_;
bool paused_;
- // If |use_interval_budget_| is true, |media_budget_| and |padding_budget_|
+ // If `use_interval_budget_` is true, `media_budget_` and `padding_budget_`
// will be used to track when packets can be sent. Otherwise the media and
// padding debt counters will be used together with the target rates.
diff --git a/modules/pacing/packet_router.h b/modules/pacing/packet_router.h
index 7a6e24d..3e8a0f3 100644
--- a/modules/pacing/packet_router.h
+++ b/modules/pacing/packet_router.h
@@ -63,7 +63,7 @@
// Send REMB feedback.
void SendRemb(int64_t bitrate_bps, std::vector<uint32_t> ssrcs);
- // Sends |packets| in one or more IP packets.
+ // Sends `packets` in one or more IP packets.
void SendCombinedRtcpPacket(
std::vector<std::unique_ptr<rtcp::RtcpPacket>> packets);
diff --git a/modules/pacing/round_robin_packet_queue.cc b/modules/pacing/round_robin_packet_queue.cc
index 8094ccd..1feb5a9 100644
--- a/modules/pacing/round_robin_packet_queue.cc
+++ b/modules/pacing/round_robin_packet_queue.cc
@@ -174,7 +174,7 @@
stream_priorities_.erase(stream->priority_it);
// Calculate the total amount of time spent by this packet in the queue
- // while in a non-paused state. Note that the |pause_time_sum_ms_| was
+ // while in a non-paused state. Note that the `pause_time_sum_ms_` was
// subtracted from |packet.enqueue_time_ms| when the packet was pushed, and
// by subtracting it now we effectively remove the time spent in in the
// queue while in a paused state.
@@ -185,11 +185,11 @@
RTC_CHECK(queued_packet.EnqueueTimeIterator() != enqueue_times_.end());
enqueue_times_.erase(queued_packet.EnqueueTimeIterator());
- // Update |bytes| of this stream. The general idea is that the stream that
+ // Update `bytes` of this stream. The general idea is that the stream that
// has sent the least amount of bytes should have the highest priority.
// The problem with that is if streams send with different rates, in which
// case a "budget" will be built up for the stream sending at the lower
- // rate. To avoid building a too large budget we limit |bytes| to be within
+ // rate. To avoid building a too large budget we limit `bytes` to be within
// kMaxLeading bytes of the stream that has sent the most amount of bytes.
DataSize packet_size = PacketSize(queued_packet);
stream->size =
@@ -331,13 +331,13 @@
Stream* stream = &stream_info_it->second;
if (stream->priority_it == stream_priorities_.end()) {
- // If the SSRC is not currently scheduled, add it to |stream_priorities_|.
+ // If the SSRC is not currently scheduled, add it to `stream_priorities_`.
RTC_CHECK(!IsSsrcScheduled(stream->ssrc));
stream->priority_it = stream_priorities_.emplace(
StreamPrioKey(packet.Priority(), stream->size), packet.Ssrc());
} else if (packet.Priority() < stream->priority_it->first.priority) {
// If the priority of this SSRC increased, remove the outdated StreamPrioKey
- // and insert a new one with the new priority. Note that |priority_| uses
+ // and insert a new one with the new priority. Note that `priority_` uses
// lower ordinal for higher priority.
stream_priorities_.erase(stream->priority_it);
stream->priority_it = stream_priorities_.emplace(
diff --git a/modules/pacing/round_robin_packet_queue.h b/modules/pacing/round_robin_packet_queue.h
index cad555a..dd35b90 100644
--- a/modules/pacing/round_robin_packet_queue.h
+++ b/modules/pacing/round_robin_packet_queue.h
@@ -128,8 +128,8 @@
PriorityPacketQueue packet_queue;
- // Whenever a packet is inserted for this stream we check if |priority_it|
- // points to an element in |stream_priorities_|, and if it does it means
+ // Whenever a packet is inserted for this stream we check if `priority_it`
+ // points to an element in `stream_priorities_`, and if it does it means
// this stream has already been scheduled, and if the scheduled priority is
// lower than the priority of the incoming packet we reschedule this stream
// with the higher priority.
diff --git a/modules/pacing/rtp_packet_pacer.h b/modules/pacing/rtp_packet_pacer.h
index d826edd..3dc2b27 100644
--- a/modules/pacing/rtp_packet_pacer.h
+++ b/modules/pacing/rtp_packet_pacer.h
@@ -56,7 +56,7 @@
// Set the average upper bound on pacer queuing delay. The pacer may send at
// a higher rate than what was configured via SetPacingRates() in order to
- // keep ExpectedQueueTimeMs() below |limit_ms| on average.
+ // keep ExpectedQueueTimeMs() below `limit_ms` on average.
virtual void SetQueueTimeLimit(TimeDelta limit) = 0;
// Currently audio traffic is not accounted by pacer and passed through.
diff --git a/modules/pacing/task_queue_paced_sender.cc b/modules/pacing/task_queue_paced_sender.cc
index 709718f..515cba3 100644
--- a/modules/pacing/task_queue_paced_sender.cc
+++ b/modules/pacing/task_queue_paced_sender.cc
@@ -22,10 +22,10 @@
namespace webrtc {
namespace {
// If no calls to MaybeProcessPackets() happen, make sure we update stats
-// at least every |kMaxTimeBetweenStatsUpdates| as long as the pacer isn't
+// at least every `kMaxTimeBetweenStatsUpdates` as long as the pacer isn't
// completely drained.
constexpr TimeDelta kMaxTimeBetweenStatsUpdates = TimeDelta::Millis(33);
-// Don't call UpdateStats() more than |kMinTimeBetweenStatsUpdates| apart,
+// Don't call UpdateStats() more than `kMinTimeBetweenStatsUpdates` apart,
// for performance reasons.
constexpr TimeDelta kMinTimeBetweenStatsUpdates = TimeDelta::Millis(1);
} // namespace
@@ -243,7 +243,7 @@
} else if (next_process_time_.IsMinusInfinity() ||
next_process_time <= next_process_time_ - hold_back_window_) {
// Schedule a new task since there is none currently scheduled
- // (|next_process_time_| is infinite), or the new process time is at least
+ // (`next_process_time_` is infinite), or the new process time is at least
// one holdback window earlier than whatever is currently scheduled.
time_to_next_process = std::max(next_process_time - now, hold_back_window_);
}
diff --git a/modules/pacing/task_queue_paced_sender.h b/modules/pacing/task_queue_paced_sender.h
index 0673441..d39417b 100644
--- a/modules/pacing/task_queue_paced_sender.h
+++ b/modules/pacing/task_queue_paced_sender.h
@@ -39,7 +39,7 @@
class TaskQueuePacedSender : public RtpPacketPacer, public RtpPacketSender {
public:
- // The |hold_back_window| parameter sets a lower bound on time to sleep if
+ // The `hold_back_window` parameter sets a lower bound on time to sleep if
// there is currently a pacer queue and packets can't immediately be
// processed. Increasing this reduces thread wakeups at the expense of higher
// latency.
@@ -136,7 +136,7 @@
PacingController pacing_controller_ RTC_GUARDED_BY(task_queue_);
// We want only one (valid) delayed process task in flight at a time.
- // If the value of |next_process_time_| is finite, it is an id for a
+ // If the value of `next_process_time_` is finite, it is an id for a
// delayed task that will call MaybeProcessPackets() with that time
// as parameter.
// Timestamp::MinusInfinity() indicates no valid pending task.
@@ -144,7 +144,7 @@
// Since we don't want to support synchronous calls that wait for a
// task execution, we poll the stats at some interval and update
- // |current_stats_|, which can in turn be polled at any time.
+ // `current_stats_`, which can in turn be polled at any time.
// True iff there is delayed task in flight that that will call
// UdpateStats().
diff --git a/modules/pacing/task_queue_paced_sender_unittest.cc b/modules/pacing/task_queue_paced_sender_unittest.cc
index 3806ec2..aca1ba0 100644
--- a/modules/pacing/task_queue_paced_sender_unittest.cc
+++ b/modules/pacing/task_queue_paced_sender_unittest.cc
@@ -424,7 +424,7 @@
// At this point, the pace queue is drained so there is no more intersting
// update to be made - but there is still as schduled task that should run
- // |kMaxTimeBetweenStatsUpdates| after the first update.
+ // `kMaxTimeBetweenStatsUpdates` after the first update.
time_controller.AdvanceTime(start_time + kMaxTimeBetweenStatsUpdates -
clock->CurrentTime());
EXPECT_EQ(pacer.num_stats_updates_, ++num_expected_stats_updates);