| /* |
| * Copyright (c) 2012 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include "video/video_stream_encoder.h" |
| |
| #include <algorithm> |
| #include <limits> |
| #include <numeric> |
| #include <utility> |
| |
| #include "absl/algorithm/container.h" |
| #include "absl/memory/memory.h" |
| #include "api/video/encoded_image.h" |
| #include "api/video/i420_buffer.h" |
| #include "api/video/video_bitrate_allocator_factory.h" |
| #include "modules/video_coding/codecs/vp9/svc_rate_allocator.h" |
| #include "modules/video_coding/include/video_codec_initializer.h" |
| #include "modules/video_coding/include/video_coding.h" |
| #include "modules/video_coding/utility/default_video_bitrate_allocator.h" |
| #include "rtc_base/arraysize.h" |
| #include "rtc_base/checks.h" |
| #include "rtc_base/experiments/alr_experiment.h" |
| #include "rtc_base/experiments/quality_scaling_experiment.h" |
| #include "rtc_base/experiments/rate_control_settings.h" |
| #include "rtc_base/location.h" |
| #include "rtc_base/logging.h" |
| #include "rtc_base/strings/string_builder.h" |
| #include "rtc_base/system/fallthrough.h" |
| #include "rtc_base/time_utils.h" |
| #include "rtc_base/trace_event.h" |
| #include "system_wrappers/include/field_trial.h" |
| |
| namespace webrtc { |
| |
| namespace { |
| |
| // Time interval for logging frame counts. |
| const int64_t kFrameLogIntervalMs = 60000; |
| const int kMinFramerateFps = 2; |
| |
| // Time to keep a single cached pending frame in paused state. |
| const int64_t kPendingFrameTimeoutMs = 1000; |
| |
| const char kInitialFramedropFieldTrial[] = "WebRTC-InitialFramedrop"; |
| constexpr char kFrameDropperFieldTrial[] = "WebRTC-FrameDropper"; |
| |
| // The maximum number of frames to drop at beginning of stream |
| // to try and achieve desired bitrate. |
| const int kMaxInitialFramedrop = 4; |
| // When the first change in BWE above this threshold occurs, |
| // enable DropFrameDueToSize logic. |
| const float kFramedropThreshold = 0.3; |
| |
| // Averaging window spanning 90 frames at default 30fps, matching old media |
| // optimization module defaults. |
| const int64_t kFrameRateAvergingWindowSizeMs = (1000 / 30) * 90; |
| |
| const size_t kDefaultPayloadSize = 1440; |
| |
| // Initial limits for BALANCED degradation preference. |
| int MinFps(int pixels) { |
| if (pixels <= 320 * 240) { |
| return 7; |
| } else if (pixels <= 480 * 270) { |
| return 10; |
| } else if (pixels <= 640 * 480) { |
| return 15; |
| } else { |
| return std::numeric_limits<int>::max(); |
| } |
| } |
| |
| int MaxFps(int pixels) { |
| if (pixels <= 320 * 240) { |
| return 10; |
| } else if (pixels <= 480 * 270) { |
| return 15; |
| } else { |
| return std::numeric_limits<int>::max(); |
| } |
| } |
| |
| uint32_t abs_diff(uint32_t a, uint32_t b) { |
| return (a < b) ? b - a : a - b; |
| } |
| |
| bool IsResolutionScalingEnabled(DegradationPreference degradation_preference) { |
| return degradation_preference == DegradationPreference::MAINTAIN_FRAMERATE || |
| degradation_preference == DegradationPreference::BALANCED; |
| } |
| |
| bool IsFramerateScalingEnabled(DegradationPreference degradation_preference) { |
| return degradation_preference == DegradationPreference::MAINTAIN_RESOLUTION || |
| degradation_preference == DegradationPreference::BALANCED; |
| } |
| |
| // TODO(pbos): Lower these thresholds (to closer to 100%) when we handle |
| // pipelining encoders better (multiple input frames before something comes |
| // out). This should effectively turn off CPU adaptations for systems that |
| // remotely cope with the load right now. |
| CpuOveruseOptions GetCpuOveruseOptions( |
| const VideoStreamEncoderSettings& settings, |
| bool full_overuse_time) { |
| CpuOveruseOptions options; |
| |
| if (full_overuse_time) { |
| options.low_encode_usage_threshold_percent = 150; |
| options.high_encode_usage_threshold_percent = 200; |
| } |
| if (settings.experiment_cpu_load_estimator) { |
| options.filter_time_ms = 5 * rtc::kNumMillisecsPerSec; |
| } |
| |
| return options; |
| } |
| |
| bool RequiresEncoderReset(const VideoCodec& previous_send_codec, |
| const VideoCodec& new_send_codec) { |
| // Does not check startBitrate or maxFramerate. |
| if (new_send_codec.codecType != previous_send_codec.codecType || |
| new_send_codec.width != previous_send_codec.width || |
| new_send_codec.height != previous_send_codec.height || |
| new_send_codec.maxBitrate != previous_send_codec.maxBitrate || |
| new_send_codec.minBitrate != previous_send_codec.minBitrate || |
| new_send_codec.qpMax != previous_send_codec.qpMax || |
| new_send_codec.numberOfSimulcastStreams != |
| previous_send_codec.numberOfSimulcastStreams || |
| new_send_codec.mode != previous_send_codec.mode) { |
| return true; |
| } |
| |
| switch (new_send_codec.codecType) { |
| case kVideoCodecVP8: |
| if (new_send_codec.VP8() != previous_send_codec.VP8()) { |
| return true; |
| } |
| break; |
| |
| case kVideoCodecVP9: |
| if (new_send_codec.VP9() != previous_send_codec.VP9()) { |
| return true; |
| } |
| break; |
| |
| case kVideoCodecH264: |
| if (new_send_codec.H264() != previous_send_codec.H264()) { |
| return true; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| for (unsigned char i = 0; i < new_send_codec.numberOfSimulcastStreams; ++i) { |
| if (new_send_codec.simulcastStream[i] != |
| previous_send_codec.simulcastStream[i]) |
| return true; |
| } |
| return false; |
| } |
| |
| std::array<uint8_t, 2> GetExperimentGroups() { |
| std::array<uint8_t, 2> experiment_groups; |
| absl::optional<AlrExperimentSettings> experiment_settings = |
| AlrExperimentSettings::CreateFromFieldTrial( |
| AlrExperimentSettings::kStrictPacingAndProbingExperimentName); |
| if (experiment_settings) { |
| experiment_groups[0] = experiment_settings->group_id + 1; |
| } else { |
| experiment_groups[0] = 0; |
| } |
| experiment_settings = AlrExperimentSettings::CreateFromFieldTrial( |
| AlrExperimentSettings::kScreenshareProbingBweExperimentName); |
| if (experiment_settings) { |
| experiment_groups[1] = experiment_settings->group_id + 1; |
| } else { |
| experiment_groups[1] = 0; |
| } |
| return experiment_groups; |
| } |
| |
| // Limit allocation across TLs in bitrate allocation according to number of TLs |
| // in EncoderInfo. |
| VideoBitrateAllocation UpdateAllocationFromEncoderInfo( |
| const VideoBitrateAllocation& allocation, |
| const VideoEncoder::EncoderInfo& encoder_info) { |
| if (allocation.get_sum_bps() == 0) { |
| return allocation; |
| } |
| VideoBitrateAllocation new_allocation; |
| for (int si = 0; si < kMaxSpatialLayers; ++si) { |
| if (encoder_info.fps_allocation[si].size() == 1 && |
| allocation.IsSpatialLayerUsed(si)) { |
| // One TL is signalled to be used by the encoder. Do not distribute |
| // bitrate allocation across TLs (use sum at ti:0). |
| new_allocation.SetBitrate(si, 0, allocation.GetSpatialLayerSum(si)); |
| } else { |
| for (int ti = 0; ti < kMaxTemporalStreams; ++ti) { |
| if (allocation.HasBitrate(si, ti)) |
| new_allocation.SetBitrate(si, ti, allocation.GetBitrate(si, ti)); |
| } |
| } |
| } |
| return new_allocation; |
| } |
| } // namespace |
| |
| // VideoSourceProxy is responsible ensuring thread safety between calls to |
| // VideoStreamEncoder::SetSource that will happen on libjingle's worker thread |
| // when a video capturer is connected to the encoder and the encoder task queue |
| // (encoder_queue_) where the encoder reports its VideoSinkWants. |
| class VideoStreamEncoder::VideoSourceProxy { |
| public: |
| explicit VideoSourceProxy(VideoStreamEncoder* video_stream_encoder) |
| : video_stream_encoder_(video_stream_encoder), |
| degradation_preference_(DegradationPreference::DISABLED), |
| source_(nullptr), |
| max_framerate_(std::numeric_limits<int>::max()) {} |
| |
| void SetSource(rtc::VideoSourceInterface<VideoFrame>* source, |
| const DegradationPreference& degradation_preference) { |
| // Called on libjingle's worker thread. |
| RTC_DCHECK_RUN_ON(&main_checker_); |
| rtc::VideoSourceInterface<VideoFrame>* old_source = nullptr; |
| rtc::VideoSinkWants wants; |
| { |
| rtc::CritScope lock(&crit_); |
| degradation_preference_ = degradation_preference; |
| old_source = source_; |
| source_ = source; |
| wants = GetActiveSinkWantsInternal(); |
| } |
| |
| if (old_source != source && old_source != nullptr) { |
| old_source->RemoveSink(video_stream_encoder_); |
| } |
| |
| if (!source) { |
| return; |
| } |
| |
| source->AddOrUpdateSink(video_stream_encoder_, wants); |
| } |
| |
| void SetMaxFramerate(int max_framerate) { |
| RTC_DCHECK_GT(max_framerate, 0); |
| rtc::CritScope lock(&crit_); |
| if (max_framerate == max_framerate_) |
| return; |
| |
| RTC_LOG(LS_INFO) << "Set max framerate: " << max_framerate; |
| max_framerate_ = max_framerate; |
| if (source_) { |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| } |
| } |
| |
| void SetWantsRotationApplied(bool rotation_applied) { |
| rtc::CritScope lock(&crit_); |
| sink_wants_.rotation_applied = rotation_applied; |
| if (source_) { |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| } |
| } |
| |
| rtc::VideoSinkWants GetActiveSinkWants() { |
| rtc::CritScope lock(&crit_); |
| return GetActiveSinkWantsInternal(); |
| } |
| |
| void ResetPixelFpsCount() { |
| rtc::CritScope lock(&crit_); |
| sink_wants_.max_pixel_count = std::numeric_limits<int>::max(); |
| sink_wants_.target_pixel_count.reset(); |
| sink_wants_.max_framerate_fps = std::numeric_limits<int>::max(); |
| if (source_) |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| } |
| |
| bool RequestResolutionLowerThan(int pixel_count, |
| int min_pixels_per_frame, |
| bool* min_pixels_reached) { |
| // Called on the encoder task queue. |
| rtc::CritScope lock(&crit_); |
| if (!source_ || !IsResolutionScalingEnabled(degradation_preference_)) { |
| // This can happen since |degradation_preference_| is set on libjingle's |
| // worker thread but the adaptation is done on the encoder task queue. |
| return false; |
| } |
| // The input video frame size will have a resolution less than or equal to |
| // |max_pixel_count| depending on how the source can scale the frame size. |
| const int pixels_wanted = (pixel_count * 3) / 5; |
| if (pixels_wanted >= sink_wants_.max_pixel_count) { |
| return false; |
| } |
| if (pixels_wanted < min_pixels_per_frame) { |
| *min_pixels_reached = true; |
| return false; |
| } |
| RTC_LOG(LS_INFO) << "Scaling down resolution, max pixels: " |
| << pixels_wanted; |
| sink_wants_.max_pixel_count = pixels_wanted; |
| sink_wants_.target_pixel_count = absl::nullopt; |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| return true; |
| } |
| |
| int RequestFramerateLowerThan(int fps) { |
| // Called on the encoder task queue. |
| // The input video frame rate will be scaled down to 2/3, rounding down. |
| int framerate_wanted = (fps * 2) / 3; |
| return RestrictFramerate(framerate_wanted) ? framerate_wanted : -1; |
| } |
| |
| bool RequestHigherResolutionThan(int pixel_count) { |
| // Called on the encoder task queue. |
| rtc::CritScope lock(&crit_); |
| if (!source_ || !IsResolutionScalingEnabled(degradation_preference_)) { |
| // This can happen since |degradation_preference_| is set on libjingle's |
| // worker thread but the adaptation is done on the encoder task queue. |
| return false; |
| } |
| int max_pixels_wanted = pixel_count; |
| if (max_pixels_wanted != std::numeric_limits<int>::max()) |
| max_pixels_wanted = pixel_count * 4; |
| |
| if (max_pixels_wanted <= sink_wants_.max_pixel_count) |
| return false; |
| |
| sink_wants_.max_pixel_count = max_pixels_wanted; |
| if (max_pixels_wanted == std::numeric_limits<int>::max()) { |
| // Remove any constraints. |
| sink_wants_.target_pixel_count.reset(); |
| } else { |
| // On step down we request at most 3/5 the pixel count of the previous |
| // resolution, so in order to take "one step up" we request a resolution |
| // as close as possible to 5/3 of the current resolution. The actual pixel |
| // count selected depends on the capabilities of the source. In order to |
| // not take a too large step up, we cap the requested pixel count to be at |
| // most four time the current number of pixels. |
| sink_wants_.target_pixel_count = (pixel_count * 5) / 3; |
| } |
| RTC_LOG(LS_INFO) << "Scaling up resolution, max pixels: " |
| << max_pixels_wanted; |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| return true; |
| } |
| |
| // Request upgrade in framerate. Returns the new requested frame, or -1 if |
| // no change requested. Note that maxint may be returned if limits due to |
| // adaptation requests are removed completely. In that case, consider |
| // |max_framerate_| to be the current limit (assuming the capturer complies). |
| int RequestHigherFramerateThan(int fps) { |
| // Called on the encoder task queue. |
| // The input frame rate will be scaled up to the last step, with rounding. |
| int framerate_wanted = fps; |
| if (fps != std::numeric_limits<int>::max()) |
| framerate_wanted = (fps * 3) / 2; |
| |
| return IncreaseFramerate(framerate_wanted) ? framerate_wanted : -1; |
| } |
| |
| bool RestrictFramerate(int fps) { |
| // Called on the encoder task queue. |
| rtc::CritScope lock(&crit_); |
| if (!source_ || !IsFramerateScalingEnabled(degradation_preference_)) |
| return false; |
| |
| const int fps_wanted = std::max(kMinFramerateFps, fps); |
| if (fps_wanted >= sink_wants_.max_framerate_fps) |
| return false; |
| |
| RTC_LOG(LS_INFO) << "Scaling down framerate: " << fps_wanted; |
| sink_wants_.max_framerate_fps = fps_wanted; |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| return true; |
| } |
| |
| bool IncreaseFramerate(int fps) { |
| // Called on the encoder task queue. |
| rtc::CritScope lock(&crit_); |
| if (!source_ || !IsFramerateScalingEnabled(degradation_preference_)) |
| return false; |
| |
| const int fps_wanted = std::max(kMinFramerateFps, fps); |
| if (fps_wanted <= sink_wants_.max_framerate_fps) |
| return false; |
| |
| RTC_LOG(LS_INFO) << "Scaling up framerate: " << fps_wanted; |
| sink_wants_.max_framerate_fps = fps_wanted; |
| source_->AddOrUpdateSink(video_stream_encoder_, |
| GetActiveSinkWantsInternal()); |
| return true; |
| } |
| |
| private: |
| rtc::VideoSinkWants GetActiveSinkWantsInternal() |
| RTC_EXCLUSIVE_LOCKS_REQUIRED(&crit_) { |
| rtc::VideoSinkWants wants = sink_wants_; |
| // Clear any constraints from the current sink wants that don't apply to |
| // the used degradation_preference. |
| switch (degradation_preference_) { |
| case DegradationPreference::BALANCED: |
| break; |
| case DegradationPreference::MAINTAIN_FRAMERATE: |
| wants.max_framerate_fps = std::numeric_limits<int>::max(); |
| break; |
| case DegradationPreference::MAINTAIN_RESOLUTION: |
| wants.max_pixel_count = std::numeric_limits<int>::max(); |
| wants.target_pixel_count.reset(); |
| break; |
| case DegradationPreference::DISABLED: |
| wants.max_pixel_count = std::numeric_limits<int>::max(); |
| wants.target_pixel_count.reset(); |
| wants.max_framerate_fps = std::numeric_limits<int>::max(); |
| } |
| // Limit to configured max framerate. |
| wants.max_framerate_fps = std::min(max_framerate_, wants.max_framerate_fps); |
| return wants; |
| } |
| |
| rtc::CriticalSection crit_; |
| SequenceChecker main_checker_; |
| VideoStreamEncoder* const video_stream_encoder_; |
| rtc::VideoSinkWants sink_wants_ RTC_GUARDED_BY(&crit_); |
| DegradationPreference degradation_preference_ RTC_GUARDED_BY(&crit_); |
| rtc::VideoSourceInterface<VideoFrame>* source_ RTC_GUARDED_BY(&crit_); |
| int max_framerate_ RTC_GUARDED_BY(&crit_); |
| |
| RTC_DISALLOW_COPY_AND_ASSIGN(VideoSourceProxy); |
| }; |
| |
| VideoStreamEncoder::EncoderRateSettings::EncoderRateSettings() |
| : VideoEncoder::RateControlParameters(), encoder_target(DataRate::Zero()) {} |
| |
| VideoStreamEncoder::EncoderRateSettings::EncoderRateSettings( |
| const VideoBitrateAllocation& bitrate, |
| double framerate_fps, |
| DataRate bandwidth_allocation, |
| DataRate encoder_target) |
| : VideoEncoder::RateControlParameters(bitrate, |
| framerate_fps, |
| bandwidth_allocation), |
| encoder_target(encoder_target) {} |
| |
| bool VideoStreamEncoder::EncoderRateSettings::operator==( |
| const EncoderRateSettings& rhs) const { |
| return bitrate == rhs.bitrate && framerate_fps == rhs.framerate_fps && |
| bandwidth_allocation == rhs.bandwidth_allocation && |
| encoder_target == rhs.encoder_target; |
| } |
| |
| bool VideoStreamEncoder::EncoderRateSettings::operator!=( |
| const EncoderRateSettings& rhs) const { |
| return !(*this == rhs); |
| } |
| |
| VideoStreamEncoder::VideoStreamEncoder( |
| Clock* clock, |
| uint32_t number_of_cores, |
| VideoStreamEncoderObserver* encoder_stats_observer, |
| const VideoStreamEncoderSettings& settings, |
| std::unique_ptr<OveruseFrameDetector> overuse_detector, |
| TaskQueueFactory* task_queue_factory) |
| : shutdown_event_(true /* manual_reset */, false), |
| number_of_cores_(number_of_cores), |
| initial_framedrop_(0), |
| initial_framedrop_on_bwe_enabled_( |
| webrtc::field_trial::IsEnabled(kInitialFramedropFieldTrial)), |
| quality_scaling_experiment_enabled_(QualityScalingExperiment::Enabled()), |
| source_proxy_(new VideoSourceProxy(this)), |
| sink_(nullptr), |
| settings_(settings), |
| rate_control_settings_(RateControlSettings::ParseFromFieldTrials()), |
| overuse_detector_(std::move(overuse_detector)), |
| encoder_stats_observer_(encoder_stats_observer), |
| encoder_initialized_(false), |
| max_framerate_(-1), |
| pending_encoder_reconfiguration_(false), |
| pending_encoder_creation_(false), |
| crop_width_(0), |
| crop_height_(0), |
| encoder_start_bitrate_bps_(0), |
| max_data_payload_length_(0), |
| encoder_paused_and_dropped_frame_(false), |
| clock_(clock), |
| degradation_preference_(DegradationPreference::DISABLED), |
| posted_frames_waiting_for_encode_(0), |
| last_captured_timestamp_(0), |
| delta_ntp_internal_ms_(clock_->CurrentNtpInMilliseconds() - |
| clock_->TimeInMilliseconds()), |
| last_frame_log_ms_(clock_->TimeInMilliseconds()), |
| captured_frame_count_(0), |
| dropped_frame_count_(0), |
| pending_frame_post_time_us_(0), |
| accumulated_update_rect_{0, 0, 0, 0}, |
| bitrate_observer_(nullptr), |
| force_disable_frame_dropper_(false), |
| input_framerate_(kFrameRateAvergingWindowSizeMs, 1000), |
| pending_frame_drops_(0), |
| next_frame_types_(1, VideoFrameType::kVideoFrameDelta), |
| frame_encoder_timer_(this), |
| experiment_groups_(GetExperimentGroups()), |
| encoder_queue_(task_queue_factory->CreateTaskQueue( |
| "EncoderQueue", |
| TaskQueueFactory::Priority::NORMAL)) { |
| RTC_DCHECK(encoder_stats_observer); |
| RTC_DCHECK(overuse_detector_); |
| RTC_DCHECK_GE(number_of_cores, 1); |
| } |
| |
| VideoStreamEncoder::~VideoStreamEncoder() { |
| RTC_DCHECK_RUN_ON(&thread_checker_); |
| RTC_DCHECK(shutdown_event_.Wait(0)) |
| << "Must call ::Stop() before destruction."; |
| } |
| |
| void VideoStreamEncoder::Stop() { |
| RTC_DCHECK_RUN_ON(&thread_checker_); |
| source_proxy_->SetSource(nullptr, DegradationPreference()); |
| encoder_queue_.PostTask([this] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| overuse_detector_->StopCheckForOveruse(); |
| rate_allocator_ = nullptr; |
| bitrate_observer_ = nullptr; |
| ReleaseEncoder(); |
| quality_scaler_ = nullptr; |
| shutdown_event_.Set(); |
| }); |
| |
| shutdown_event_.Wait(rtc::Event::kForever); |
| } |
| |
| void VideoStreamEncoder::SetBitrateAllocationObserver( |
| VideoBitrateAllocationObserver* bitrate_observer) { |
| RTC_DCHECK_RUN_ON(&thread_checker_); |
| encoder_queue_.PostTask([this, bitrate_observer] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| RTC_DCHECK(!bitrate_observer_); |
| bitrate_observer_ = bitrate_observer; |
| }); |
| } |
| |
| void VideoStreamEncoder::SetSource( |
| rtc::VideoSourceInterface<VideoFrame>* source, |
| const DegradationPreference& degradation_preference) { |
| RTC_DCHECK_RUN_ON(&thread_checker_); |
| source_proxy_->SetSource(source, degradation_preference); |
| encoder_queue_.PostTask([this, degradation_preference] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| if (degradation_preference_ != degradation_preference) { |
| // Reset adaptation state, so that we're not tricked into thinking there's |
| // an already pending request of the same type. |
| last_adaptation_request_.reset(); |
| if (degradation_preference == DegradationPreference::BALANCED || |
| degradation_preference_ == DegradationPreference::BALANCED) { |
| // TODO(asapersson): Consider removing |adapt_counters_| map and use one |
| // AdaptCounter for all modes. |
| source_proxy_->ResetPixelFpsCount(); |
| adapt_counters_.clear(); |
| } |
| } |
| degradation_preference_ = degradation_preference; |
| |
| if (encoder_) |
| ConfigureQualityScaler(encoder_->GetEncoderInfo()); |
| |
| if (!IsFramerateScalingEnabled(degradation_preference) && |
| max_framerate_ != -1) { |
| // If frame rate scaling is no longer allowed, remove any potential |
| // allowance for longer frame intervals. |
| overuse_detector_->OnTargetFramerateUpdated(max_framerate_); |
| } |
| }); |
| } |
| |
| void VideoStreamEncoder::SetSink(EncoderSink* sink, bool rotation_applied) { |
| source_proxy_->SetWantsRotationApplied(rotation_applied); |
| encoder_queue_.PostTask([this, sink] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| sink_ = sink; |
| }); |
| } |
| |
| void VideoStreamEncoder::SetStartBitrate(int start_bitrate_bps) { |
| encoder_queue_.PostTask([this, start_bitrate_bps] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| encoder_start_bitrate_bps_ = start_bitrate_bps; |
| }); |
| } |
| |
| void VideoStreamEncoder::ConfigureEncoder(VideoEncoderConfig config, |
| size_t max_data_payload_length) { |
| // TODO(srte): This struct should be replaced by a lambda with move capture |
| // when C++14 lambda is allowed. |
| struct ConfigureEncoderTask { |
| void operator()() { |
| encoder->ConfigureEncoderOnTaskQueue(std::move(config), |
| max_data_payload_length); |
| } |
| VideoStreamEncoder* encoder; |
| VideoEncoderConfig config; |
| size_t max_data_payload_length; |
| }; |
| encoder_queue_.PostTask( |
| ConfigureEncoderTask{this, std::move(config), max_data_payload_length}); |
| } |
| |
| void VideoStreamEncoder::ConfigureEncoderOnTaskQueue( |
| VideoEncoderConfig config, |
| size_t max_data_payload_length) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| RTC_DCHECK(sink_); |
| RTC_LOG(LS_INFO) << "ConfigureEncoder requested."; |
| |
| pending_encoder_creation_ = |
| (!encoder_ || encoder_config_.video_format != config.video_format || |
| max_data_payload_length_ != max_data_payload_length); |
| encoder_config_ = std::move(config); |
| max_data_payload_length_ = max_data_payload_length; |
| pending_encoder_reconfiguration_ = true; |
| |
| // Reconfigure the encoder now if the encoder has an internal source or |
| // if the frame resolution is known. Otherwise, the reconfiguration is |
| // deferred until the next frame to minimize the number of reconfigurations. |
| // The codec configuration depends on incoming video frame size. |
| if (last_frame_info_) { |
| ReconfigureEncoder(); |
| } else { |
| codec_info_ = settings_.encoder_factory->QueryVideoEncoder( |
| encoder_config_.video_format); |
| if (HasInternalSource()) { |
| last_frame_info_ = VideoFrameInfo(176, 144, false); |
| ReconfigureEncoder(); |
| } |
| } |
| } |
| |
| // TODO(bugs.webrtc.org/8807): Currently this always does a hard |
| // reconfiguration, but this isn't always necessary. Add in logic to only update |
| // the VideoBitrateAllocator and call OnEncoderConfigurationChanged with a |
| // "soft" reconfiguration. |
| void VideoStreamEncoder::ReconfigureEncoder() { |
| RTC_DCHECK(pending_encoder_reconfiguration_); |
| std::vector<VideoStream> streams = |
| encoder_config_.video_stream_factory->CreateEncoderStreams( |
| last_frame_info_->width, last_frame_info_->height, encoder_config_); |
| |
| // TODO(ilnik): If configured resolution is significantly less than provided, |
| // e.g. because there are not enough SSRCs for all simulcast streams, |
| // signal new resolutions via SinkWants to video source. |
| |
| // Stream dimensions may be not equal to given because of a simulcast |
| // restrictions. |
| auto highest_stream = absl::c_max_element( |
| streams, [](const webrtc::VideoStream& a, const webrtc::VideoStream& b) { |
| return std::tie(a.width, a.height) < std::tie(b.width, b.height); |
| }); |
| int highest_stream_width = static_cast<int>(highest_stream->width); |
| int highest_stream_height = static_cast<int>(highest_stream->height); |
| // Dimension may be reduced to be, e.g. divisible by 4. |
| RTC_CHECK_GE(last_frame_info_->width, highest_stream_width); |
| RTC_CHECK_GE(last_frame_info_->height, highest_stream_height); |
| crop_width_ = last_frame_info_->width - highest_stream_width; |
| crop_height_ = last_frame_info_->height - highest_stream_height; |
| |
| VideoCodec codec; |
| if (!VideoCodecInitializer::SetupCodec(encoder_config_, streams, &codec)) { |
| RTC_LOG(LS_ERROR) << "Failed to create encoder configuration."; |
| } |
| |
| rate_allocator_ = |
| settings_.bitrate_allocator_factory->CreateVideoBitrateAllocator(codec); |
| |
| // Set min_bitrate_bps, max_bitrate_bps, and max padding bit rate for VP9. |
| if (encoder_config_.codec_type == kVideoCodecVP9) { |
| // Lower max bitrate to the level codec actually can produce. |
| streams[0].max_bitrate_bps = std::min<int>( |
| streams[0].max_bitrate_bps, SvcRateAllocator::GetMaxBitrateBps(codec)); |
| streams[0].min_bitrate_bps = codec.spatialLayers[0].minBitrate * 1000; |
| // target_bitrate_bps specifies the maximum padding bitrate. |
| streams[0].target_bitrate_bps = |
| SvcRateAllocator::GetPaddingBitrateBps(codec); |
| } |
| |
| codec.startBitrate = |
| std::max(encoder_start_bitrate_bps_ / 1000, codec.minBitrate); |
| codec.startBitrate = std::min(codec.startBitrate, codec.maxBitrate); |
| codec.expect_encode_from_texture = last_frame_info_->is_texture; |
| // Make sure the start bit rate is sane... |
| RTC_DCHECK_LE(codec.startBitrate, 1000000); |
| max_framerate_ = codec.maxFramerate; |
| |
| // Inform source about max configured framerate. |
| int max_framerate = 0; |
| for (const auto& stream : streams) { |
| max_framerate = std::max(stream.max_framerate, max_framerate); |
| } |
| source_proxy_->SetMaxFramerate(max_framerate); |
| |
| if (codec.maxBitrate == 0) { |
| // max is one bit per pixel |
| codec.maxBitrate = |
| (static_cast<int>(codec.height) * static_cast<int>(codec.width) * |
| static_cast<int>(codec.maxFramerate)) / |
| 1000; |
| if (codec.startBitrate > codec.maxBitrate) { |
| // But if the user tries to set a higher start bit rate we will |
| // increase the max accordingly. |
| codec.maxBitrate = codec.startBitrate; |
| } |
| } |
| |
| if (codec.startBitrate > codec.maxBitrate) { |
| codec.startBitrate = codec.maxBitrate; |
| } |
| |
| // Reset (release existing encoder) if one exists and anything except |
| // start bitrate or max framerate has changed. Don't call Release() if |
| // |pending_encoder_creation_| as that means this is a new encoder |
| // that has not yet been initialized. |
| const bool reset_required = RequiresEncoderReset(codec, send_codec_); |
| send_codec_ = codec; |
| |
| // Keep the same encoder, as long as the video_format is unchanged. |
| // Encoder creation block is split in two since EncoderInfo needed to start |
| // CPU adaptation with the correct settings should be polled after |
| // encoder_->InitEncode(). |
| bool success = true; |
| if (pending_encoder_creation_ || reset_required) { |
| ReleaseEncoder(); |
| if (pending_encoder_creation_) { |
| encoder_ = settings_.encoder_factory->CreateVideoEncoder( |
| encoder_config_.video_format); |
| // TODO(nisse): What to do if creating the encoder fails? Crash, |
| // or just discard incoming frames? |
| RTC_CHECK(encoder_); |
| codec_info_ = settings_.encoder_factory->QueryVideoEncoder( |
| encoder_config_.video_format); |
| } |
| |
| if (encoder_->InitEncode(&send_codec_, number_of_cores_, |
| max_data_payload_length_ > 0 |
| ? max_data_payload_length_ |
| : kDefaultPayloadSize) != 0) { |
| RTC_LOG(LS_ERROR) << "Failed to initialize the encoder associated with " |
| "codec type: " |
| << CodecTypeToPayloadString(send_codec_.codecType) |
| << " (" << send_codec_.codecType << ")"; |
| ReleaseEncoder(); |
| success = false; |
| } else { |
| encoder_initialized_ = true; |
| encoder_->RegisterEncodeCompleteCallback(this); |
| frame_encoder_timer_.OnEncoderInit(send_codec_, HasInternalSource()); |
| } |
| |
| frame_encoder_timer_.Reset(); |
| last_encode_info_ms_ = absl::nullopt; |
| } |
| |
| if (success) { |
| next_frame_types_.clear(); |
| next_frame_types_.resize( |
| std::max(static_cast<int>(codec.numberOfSimulcastStreams), 1), |
| VideoFrameType::kVideoFrameKey); |
| RTC_LOG(LS_VERBOSE) << " max bitrate " << codec.maxBitrate |
| << " start bitrate " << codec.startBitrate |
| << " max frame rate " << codec.maxFramerate |
| << " max payload size " << max_data_payload_length_; |
| } else { |
| RTC_LOG(LS_ERROR) << "Failed to configure encoder."; |
| rate_allocator_ = nullptr; |
| } |
| |
| if (pending_encoder_creation_) { |
| overuse_detector_->StopCheckForOveruse(); |
| overuse_detector_->StartCheckForOveruse( |
| &encoder_queue_, |
| GetCpuOveruseOptions( |
| settings_, encoder_->GetEncoderInfo().is_hardware_accelerated), |
| this); |
| pending_encoder_creation_ = false; |
| } |
| |
| int num_layers; |
| if (codec.codecType == kVideoCodecVP8) { |
| num_layers = codec.VP8()->numberOfTemporalLayers; |
| } else if (codec.codecType == kVideoCodecVP9) { |
| num_layers = codec.VP9()->numberOfTemporalLayers; |
| } else if (codec.codecType == kVideoCodecH264) { |
| num_layers = codec.H264()->numberOfTemporalLayers; |
| } else if (codec.codecType == kVideoCodecGeneric && |
| codec.numberOfSimulcastStreams > 0) { |
| // This is mainly for unit testing, disabling frame dropping. |
| // TODO(sprang): Add a better way to disable frame dropping. |
| num_layers = codec.simulcastStream[0].numberOfTemporalLayers; |
| } else { |
| num_layers = 1; |
| } |
| |
| frame_dropper_.Reset(); |
| frame_dropper_.SetRates(codec.startBitrate, max_framerate_); |
| // Force-disable frame dropper if either: |
| // * We have screensharing with layers. |
| // * "WebRTC-FrameDropper" field trial is "Disabled". |
| force_disable_frame_dropper_ = |
| field_trial::IsDisabled(kFrameDropperFieldTrial) || |
| (num_layers > 1 && codec.mode == VideoCodecMode::kScreensharing); |
| |
| VideoEncoder::EncoderInfo info = encoder_->GetEncoderInfo(); |
| if (rate_control_settings_.UseEncoderBitrateAdjuster()) { |
| bitrate_adjuster_ = absl::make_unique<EncoderBitrateAdjuster>(codec); |
| bitrate_adjuster_->OnEncoderInfo(info); |
| } |
| |
| if (rate_allocator_ && last_encoder_rate_settings_) { |
| // We have a new rate allocator instance and already configured target |
| // bitrate. Update the rate allocation and notify observers. |
| last_encoder_rate_settings_->framerate_fps = GetInputFramerateFps(); |
| SetEncoderRates( |
| UpdateBitrateAllocationAndNotifyObserver(*last_encoder_rate_settings_)); |
| } |
| |
| encoder_stats_observer_->OnEncoderReconfigured(encoder_config_, streams); |
| |
| pending_encoder_reconfiguration_ = false; |
| |
| sink_->OnEncoderConfigurationChanged( |
| std::move(streams), encoder_config_.content_type, |
| encoder_config_.min_transmit_bitrate_bps); |
| |
| // Get the current target framerate, ie the maximum framerate as specified by |
| // the current codec configuration, or any limit imposed by cpu adaption in |
| // maintain-resolution or balanced mode. This is used to make sure overuse |
| // detection doesn't needlessly trigger in low and/or variable framerate |
| // scenarios. |
| int target_framerate = std::min( |
| max_framerate_, source_proxy_->GetActiveSinkWants().max_framerate_fps); |
| overuse_detector_->OnTargetFramerateUpdated(target_framerate); |
| |
| ConfigureQualityScaler(info); |
| } |
| |
| void VideoStreamEncoder::ConfigureQualityScaler( |
| const VideoEncoder::EncoderInfo& encoder_info) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| const auto scaling_settings = encoder_info.scaling_settings; |
| const bool quality_scaling_allowed = |
| IsResolutionScalingEnabled(degradation_preference_) && |
| scaling_settings.thresholds; |
| |
| if (quality_scaling_allowed) { |
| if (quality_scaler_ == nullptr) { |
| // Quality scaler has not already been configured. |
| |
| // Use experimental thresholds if available. |
| absl::optional<VideoEncoder::QpThresholds> experimental_thresholds; |
| if (quality_scaling_experiment_enabled_) { |
| experimental_thresholds = QualityScalingExperiment::GetQpThresholds( |
| encoder_config_.codec_type); |
| } |
| // Since the interface is non-public, absl::make_unique can't do this |
| // upcast. |
| AdaptationObserverInterface* observer = this; |
| quality_scaler_ = absl::make_unique<QualityScaler>( |
| &encoder_queue_, observer, |
| experimental_thresholds ? *experimental_thresholds |
| : *(scaling_settings.thresholds)); |
| has_seen_first_significant_bwe_change_ = false; |
| initial_framedrop_ = 0; |
| } |
| } else { |
| quality_scaler_.reset(nullptr); |
| initial_framedrop_ = kMaxInitialFramedrop; |
| } |
| |
| encoder_stats_observer_->OnAdaptationChanged( |
| VideoStreamEncoderObserver::AdaptationReason::kNone, |
| GetActiveCounts(kCpu), GetActiveCounts(kQuality)); |
| } |
| |
| void VideoStreamEncoder::OnFrame(const VideoFrame& video_frame) { |
| RTC_DCHECK_RUNS_SERIALIZED(&incoming_frame_race_checker_); |
| VideoFrame incoming_frame = video_frame; |
| |
| // Local time in webrtc time base. |
| int64_t current_time_us = clock_->TimeInMicroseconds(); |
| int64_t current_time_ms = current_time_us / rtc::kNumMicrosecsPerMillisec; |
| // In some cases, e.g., when the frame from decoder is fed to encoder, |
| // the timestamp may be set to the future. As the encoding pipeline assumes |
| // capture time to be less than present time, we should reset the capture |
| // timestamps here. Otherwise there may be issues with RTP send stream. |
| if (incoming_frame.timestamp_us() > current_time_us) |
| incoming_frame.set_timestamp_us(current_time_us); |
| |
| // Capture time may come from clock with an offset and drift from clock_. |
| int64_t capture_ntp_time_ms; |
| if (video_frame.ntp_time_ms() > 0) { |
| capture_ntp_time_ms = video_frame.ntp_time_ms(); |
| } else if (video_frame.render_time_ms() != 0) { |
| capture_ntp_time_ms = video_frame.render_time_ms() + delta_ntp_internal_ms_; |
| } else { |
| capture_ntp_time_ms = current_time_ms + delta_ntp_internal_ms_; |
| } |
| incoming_frame.set_ntp_time_ms(capture_ntp_time_ms); |
| |
| // Convert NTP time, in ms, to RTP timestamp. |
| const int kMsToRtpTimestamp = 90; |
| incoming_frame.set_timestamp( |
| kMsToRtpTimestamp * static_cast<uint32_t>(incoming_frame.ntp_time_ms())); |
| |
| if (incoming_frame.ntp_time_ms() <= last_captured_timestamp_) { |
| // We don't allow the same capture time for two frames, drop this one. |
| RTC_LOG(LS_WARNING) << "Same/old NTP timestamp (" |
| << incoming_frame.ntp_time_ms() |
| << " <= " << last_captured_timestamp_ |
| << ") for incoming frame. Dropping."; |
| encoder_queue_.PostTask([this, incoming_frame]() { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| accumulated_update_rect_.Union(incoming_frame.update_rect()); |
| }); |
| return; |
| } |
| |
| bool log_stats = false; |
| if (current_time_ms - last_frame_log_ms_ > kFrameLogIntervalMs) { |
| last_frame_log_ms_ = current_time_ms; |
| log_stats = true; |
| } |
| |
| last_captured_timestamp_ = incoming_frame.ntp_time_ms(); |
| |
| int64_t post_time_us = rtc::TimeMicros(); |
| ++posted_frames_waiting_for_encode_; |
| |
| encoder_queue_.PostTask( |
| [this, incoming_frame, post_time_us, log_stats]() { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| encoder_stats_observer_->OnIncomingFrame(incoming_frame.width(), |
| incoming_frame.height()); |
| ++captured_frame_count_; |
| const int posted_frames_waiting_for_encode = |
| posted_frames_waiting_for_encode_.fetch_sub(1); |
| RTC_DCHECK_GT(posted_frames_waiting_for_encode, 0); |
| if (posted_frames_waiting_for_encode == 1) { |
| MaybeEncodeVideoFrame(incoming_frame, post_time_us); |
| } else { |
| // There is a newer frame in flight. Do not encode this frame. |
| RTC_LOG(LS_VERBOSE) |
| << "Incoming frame dropped due to that the encoder is blocked."; |
| ++dropped_frame_count_; |
| encoder_stats_observer_->OnFrameDropped( |
| VideoStreamEncoderObserver::DropReason::kEncoderQueue); |
| accumulated_update_rect_.Union(incoming_frame.update_rect()); |
| } |
| if (log_stats) { |
| RTC_LOG(LS_INFO) << "Number of frames: captured " |
| << captured_frame_count_ |
| << ", dropped (due to encoder blocked) " |
| << dropped_frame_count_ << ", interval_ms " |
| << kFrameLogIntervalMs; |
| captured_frame_count_ = 0; |
| dropped_frame_count_ = 0; |
| } |
| }); |
| } |
| |
| void VideoStreamEncoder::OnDiscardedFrame() { |
| encoder_stats_observer_->OnFrameDropped( |
| VideoStreamEncoderObserver::DropReason::kSource); |
| } |
| |
| bool VideoStreamEncoder::EncoderPaused() const { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| // Pause video if paused by caller or as long as the network is down or the |
| // pacer queue has grown too large in buffered mode. |
| // If the pacer queue has grown too large or the network is down, |
| // |last_encoder_rate_settings_->encoder_target| will be 0. |
| return !last_encoder_rate_settings_ || |
| last_encoder_rate_settings_->encoder_target == DataRate::Zero(); |
| } |
| |
| void VideoStreamEncoder::TraceFrameDropStart() { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| // Start trace event only on the first frame after encoder is paused. |
| if (!encoder_paused_and_dropped_frame_) { |
| TRACE_EVENT_ASYNC_BEGIN0("webrtc", "EncoderPaused", this); |
| } |
| encoder_paused_and_dropped_frame_ = true; |
| } |
| |
| void VideoStreamEncoder::TraceFrameDropEnd() { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| // End trace event on first frame after encoder resumes, if frame was dropped. |
| if (encoder_paused_and_dropped_frame_) { |
| TRACE_EVENT_ASYNC_END0("webrtc", "EncoderPaused", this); |
| } |
| encoder_paused_and_dropped_frame_ = false; |
| } |
| |
| VideoStreamEncoder::EncoderRateSettings |
| VideoStreamEncoder::UpdateBitrateAllocationAndNotifyObserver( |
| const EncoderRateSettings& rate_settings) { |
| VideoBitrateAllocation new_allocation; |
| // Only call allocators if bitrate > 0 (ie, not suspended), otherwise they |
| // might cap the bitrate to the min bitrate configured. |
| if (rate_allocator_ && rate_settings.encoder_target > DataRate::Zero()) { |
| new_allocation = rate_allocator_->GetAllocation( |
| rate_settings.encoder_target.bps(), |
| static_cast<uint32_t>(rate_settings.framerate_fps + 0.5)); |
| } |
| |
| if (bitrate_observer_ && new_allocation.get_sum_bps() > 0) { |
| if (encoder_ && encoder_initialized_) { |
| // Avoid too old encoder_info_. |
| const int64_t kMaxDiffMs = 100; |
| const bool updated_recently = |
| (last_encode_info_ms_ && ((clock_->TimeInMilliseconds() - |
| *last_encode_info_ms_) < kMaxDiffMs)); |
| // Update allocation according to info from encoder. |
| bitrate_observer_->OnBitrateAllocationUpdated( |
| UpdateAllocationFromEncoderInfo( |
| new_allocation, |
| updated_recently ? encoder_info_ : encoder_->GetEncoderInfo())); |
| } else { |
| bitrate_observer_->OnBitrateAllocationUpdated(new_allocation); |
| } |
| } |
| |
| if (bitrate_adjuster_) { |
| VideoBitrateAllocation adjusted_allocation = |
| bitrate_adjuster_->AdjustRateAllocation( |
| new_allocation, |
| static_cast<int>(rate_settings.framerate_fps + 0.5)); |
| RTC_LOG(LS_VERBOSE) << "Adjusting allocation, fps = " |
| << rate_settings.framerate_fps << ", from " |
| << new_allocation.ToString() << ", to " |
| << adjusted_allocation.ToString(); |
| new_allocation = adjusted_allocation; |
| } |
| |
| return EncoderRateSettings(new_allocation, rate_settings.framerate_fps, |
| rate_settings.bandwidth_allocation, |
| rate_settings.encoder_target); |
| } |
| |
| uint32_t VideoStreamEncoder::GetInputFramerateFps() { |
| const uint32_t default_fps = max_framerate_ != -1 ? max_framerate_ : 30; |
| absl::optional<uint32_t> input_fps = |
| input_framerate_.Rate(clock_->TimeInMilliseconds()); |
| if (!input_fps || *input_fps == 0) { |
| return default_fps; |
| } |
| return *input_fps; |
| } |
| |
| void VideoStreamEncoder::SetEncoderRates( |
| const EncoderRateSettings& rate_settings) { |
| RTC_DCHECK_GT(rate_settings.framerate_fps, 0.0); |
| const bool settings_changes = !last_encoder_rate_settings_ || |
| rate_settings != *last_encoder_rate_settings_; |
| if (settings_changes) { |
| last_encoder_rate_settings_ = rate_settings; |
| } |
| |
| if (!encoder_) { |
| return; |
| } |
| |
| // |bitrate_allocation| is 0 it means that the network is down or the send |
| // pacer is full. We currently only report this if the encoder has an internal |
| // source. If the encoder does not have an internal source, higher levels |
| // are expected to not call AddVideoFrame. We do this since its unclear |
| // how current encoder implementations behave when given a zero target |
| // bitrate. |
| // TODO(perkj): Make sure all known encoder implementations handle zero |
| // target bitrate and remove this check. |
| if (!HasInternalSource() && rate_settings.bitrate.get_sum_bps() == 0) { |
| return; |
| } |
| |
| if (settings_changes) { |
| encoder_->SetRates(rate_settings); |
| frame_encoder_timer_.OnSetRates( |
| rate_settings.bitrate, |
| static_cast<uint32_t>(rate_settings.framerate_fps + 0.5)); |
| } |
| } |
| |
| void VideoStreamEncoder::MaybeEncodeVideoFrame(const VideoFrame& video_frame, |
| int64_t time_when_posted_us) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| |
| if (!last_frame_info_ || video_frame.width() != last_frame_info_->width || |
| video_frame.height() != last_frame_info_->height || |
| video_frame.is_texture() != last_frame_info_->is_texture) { |
| pending_encoder_reconfiguration_ = true; |
| last_frame_info_ = VideoFrameInfo(video_frame.width(), video_frame.height(), |
| video_frame.is_texture()); |
| RTC_LOG(LS_INFO) << "Video frame parameters changed: dimensions=" |
| << last_frame_info_->width << "x" |
| << last_frame_info_->height |
| << ", texture=" << last_frame_info_->is_texture << "."; |
| // Force full frame update, since resolution has changed. |
| accumulated_update_rect_ = |
| VideoFrame::UpdateRect{0, 0, video_frame.width(), video_frame.height()}; |
| } |
| |
| // We have to create then encoder before the frame drop logic, |
| // because the latter depends on encoder_->GetScalingSettings. |
| // According to the testcase |
| // InitialFrameDropOffWhenEncoderDisabledScaling, the return value |
| // from GetScalingSettings should enable or disable the frame drop. |
| |
| // Update input frame rate before we start using it. If we update it after |
| // any potential frame drop we are going to artificially increase frame sizes. |
| // Poll the rate before updating, otherwise we risk the rate being estimated |
| // a little too high at the start of the call when then window is small. |
| uint32_t framerate_fps = GetInputFramerateFps(); |
| input_framerate_.Update(1u, clock_->TimeInMilliseconds()); |
| |
| int64_t now_ms = clock_->TimeInMilliseconds(); |
| if (pending_encoder_reconfiguration_) { |
| ReconfigureEncoder(); |
| last_parameters_update_ms_.emplace(now_ms); |
| } else if (!last_parameters_update_ms_ || |
| now_ms - *last_parameters_update_ms_ >= |
| vcm::VCMProcessTimer::kDefaultProcessIntervalMs) { |
| if (last_encoder_rate_settings_) { |
| // Clone rate settings before update, so that SetEncoderRates() will |
| // actually detect the change between the input and |
| // |last_encoder_rate_setings_|, triggering the call to SetRate() on the |
| // encoder. |
| EncoderRateSettings new_rate_settings = *last_encoder_rate_settings_; |
| new_rate_settings.framerate_fps = static_cast<double>(framerate_fps); |
| SetEncoderRates( |
| UpdateBitrateAllocationAndNotifyObserver(new_rate_settings)); |
| } |
| last_parameters_update_ms_.emplace(now_ms); |
| } |
| |
| // Because pending frame will be dropped in any case, we need to |
| // remember its updated region. |
| if (pending_frame_) { |
| encoder_stats_observer_->OnFrameDropped( |
| VideoStreamEncoderObserver::DropReason::kEncoderQueue); |
| accumulated_update_rect_.Union(pending_frame_->update_rect()); |
| } |
| |
| if (DropDueToSize(video_frame.size())) { |
| RTC_LOG(LS_INFO) << "Dropping frame. Too large for target bitrate."; |
| int count = GetConstAdaptCounter().ResolutionCount(kQuality); |
| AdaptDown(kQuality); |
| if (GetConstAdaptCounter().ResolutionCount(kQuality) > count) { |
| encoder_stats_observer_->OnInitialQualityResolutionAdaptDown(); |
| } |
| ++initial_framedrop_; |
| // Storing references to a native buffer risks blocking frame capture. |
| if (video_frame.video_frame_buffer()->type() != |
| VideoFrameBuffer::Type::kNative) { |
| pending_frame_ = video_frame; |
| pending_frame_post_time_us_ = time_when_posted_us; |
| } else { |
| // Ensure that any previously stored frame is dropped. |
| pending_frame_.reset(); |
| accumulated_update_rect_.Union(video_frame.update_rect()); |
| } |
| return; |
| } |
| initial_framedrop_ = kMaxInitialFramedrop; |
| |
| if (EncoderPaused()) { |
| // Storing references to a native buffer risks blocking frame capture. |
| if (video_frame.video_frame_buffer()->type() != |
| VideoFrameBuffer::Type::kNative) { |
| if (pending_frame_) |
| TraceFrameDropStart(); |
| pending_frame_ = video_frame; |
| pending_frame_post_time_us_ = time_when_posted_us; |
| } else { |
| // Ensure that any previously stored frame is dropped. |
| pending_frame_.reset(); |
| TraceFrameDropStart(); |
| accumulated_update_rect_.Union(video_frame.update_rect()); |
| } |
| return; |
| } |
| |
| pending_frame_.reset(); |
| |
| frame_dropper_.Leak(framerate_fps); |
| // Frame dropping is enabled iff frame dropping is not force-disabled, and |
| // rate controller is not trusted. |
| const bool frame_dropping_enabled = |
| !force_disable_frame_dropper_ && |
| !encoder_info_.has_trusted_rate_controller; |
| frame_dropper_.Enable(frame_dropping_enabled); |
| if (frame_dropping_enabled && frame_dropper_.DropFrame()) { |
| RTC_LOG(LS_VERBOSE) |
| << "Drop Frame: " |
| << "target bitrate " |
| << (last_encoder_rate_settings_ |
| ? last_encoder_rate_settings_->encoder_target.bps() |
| : 0) |
| << ", input frame rate " << framerate_fps; |
| OnDroppedFrame( |
| EncodedImageCallback::DropReason::kDroppedByMediaOptimizations); |
| accumulated_update_rect_.Union(video_frame.update_rect()); |
| return; |
| } |
| |
| EncodeVideoFrame(video_frame, time_when_posted_us); |
| } |
| |
| void VideoStreamEncoder::EncodeVideoFrame(const VideoFrame& video_frame, |
| int64_t time_when_posted_us) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| TraceFrameDropEnd(); |
| |
| VideoFrame out_frame(video_frame); |
| // Crop frame if needed. |
| if (crop_width_ > 0 || crop_height_ > 0) { |
| int cropped_width = video_frame.width() - crop_width_; |
| int cropped_height = video_frame.height() - crop_height_; |
| rtc::scoped_refptr<I420Buffer> cropped_buffer = |
| I420Buffer::Create(cropped_width, cropped_height); |
| // TODO(ilnik): Remove scaling if cropping is too big, as it should never |
| // happen after SinkWants signaled correctly from ReconfigureEncoder. |
| VideoFrame::UpdateRect update_rect = video_frame.update_rect(); |
| if (crop_width_ < 4 && crop_height_ < 4) { |
| cropped_buffer->CropAndScaleFrom( |
| *video_frame.video_frame_buffer()->ToI420(), crop_width_ / 2, |
| crop_height_ / 2, cropped_width, cropped_height); |
| update_rect.offset_x -= crop_width_ / 2; |
| update_rect.offset_y -= crop_height_ / 2; |
| update_rect.Intersect( |
| VideoFrame::UpdateRect{0, 0, cropped_width, cropped_height}); |
| |
| } else { |
| cropped_buffer->ScaleFrom( |
| *video_frame.video_frame_buffer()->ToI420().get()); |
| if (!update_rect.IsEmpty()) { |
| // Since we can't reason about pixels after scaling, we invalidate whole |
| // picture, if anything changed. |
| update_rect = |
| VideoFrame::UpdateRect{0, 0, cropped_width, cropped_height}; |
| } |
| } |
| out_frame = VideoFrame::Builder() |
| .set_video_frame_buffer(cropped_buffer) |
| .set_timestamp_rtp(video_frame.timestamp()) |
| .set_timestamp_ms(video_frame.render_time_ms()) |
| .set_rotation(video_frame.rotation()) |
| .set_id(video_frame.id()) |
| .set_update_rect(update_rect) |
| .build(); |
| out_frame.set_ntp_time_ms(video_frame.ntp_time_ms()); |
| // Since accumulated_update_rect_ is constructed before cropping, |
| // we can't trust it. If any changes were pending, we invalidate whole |
| // frame here. |
| if (!accumulated_update_rect_.IsEmpty()) { |
| accumulated_update_rect_ = |
| VideoFrame::UpdateRect{0, 0, out_frame.width(), out_frame.height()}; |
| } |
| } |
| |
| if (!accumulated_update_rect_.IsEmpty()) { |
| accumulated_update_rect_.Union(out_frame.update_rect()); |
| accumulated_update_rect_.Intersect( |
| VideoFrame::UpdateRect{0, 0, out_frame.width(), out_frame.height()}); |
| out_frame.set_update_rect(accumulated_update_rect_); |
| accumulated_update_rect_.MakeEmptyUpdate(); |
| } |
| |
| TRACE_EVENT_ASYNC_STEP0("webrtc", "Video", video_frame.render_time_ms(), |
| "Encode"); |
| |
| overuse_detector_->FrameCaptured(out_frame, time_when_posted_us); |
| |
| // Encoder metadata needs to be updated before encode complete callback. |
| VideoEncoder::EncoderInfo info = encoder_->GetEncoderInfo(); |
| if (info.implementation_name != encoder_info_.implementation_name) { |
| encoder_stats_observer_->OnEncoderImplementationChanged( |
| info.implementation_name); |
| if (bitrate_adjuster_) { |
| // Encoder implementation changed, reset overshoot detector states. |
| bitrate_adjuster_->Reset(); |
| } |
| } |
| |
| if (bitrate_adjuster_) { |
| for (size_t si = 0; si < kMaxSpatialLayers; ++si) { |
| if (info.fps_allocation[si] != encoder_info_.fps_allocation[si]) { |
| bitrate_adjuster_->OnEncoderInfo(info); |
| break; |
| } |
| } |
| } |
| |
| encoder_info_ = info; |
| last_encode_info_ms_ = clock_->TimeInMilliseconds(); |
| RTC_DCHECK_EQ(send_codec_.width, out_frame.width()); |
| RTC_DCHECK_EQ(send_codec_.height, out_frame.height()); |
| const VideoFrameBuffer::Type buffer_type = |
| out_frame.video_frame_buffer()->type(); |
| const bool is_buffer_type_supported = |
| buffer_type == VideoFrameBuffer::Type::kI420 || |
| (buffer_type == VideoFrameBuffer::Type::kNative && |
| info.supports_native_handle); |
| |
| if (!is_buffer_type_supported) { |
| // This module only supports software encoding. |
| rtc::scoped_refptr<I420BufferInterface> converted_buffer( |
| out_frame.video_frame_buffer()->ToI420()); |
| |
| if (!converted_buffer) { |
| RTC_LOG(LS_ERROR) << "Frame conversion failed, dropping frame."; |
| return; |
| } |
| |
| // UpdatedRect is reset to full update if it's not empty, because buffer was |
| // converted, therefore we can't guarantee that pixels outside of UpdateRect |
| // didn't change comparing to the previous frame. |
| VideoFrame::UpdateRect update_rect = |
| out_frame.update_rect().IsEmpty() |
| ? out_frame.update_rect() |
| : VideoFrame::UpdateRect{0, 0, out_frame.width(), |
| out_frame.height()}; |
| |
| out_frame = VideoFrame::Builder() |
| .set_video_frame_buffer(converted_buffer) |
| .set_timestamp_rtp(out_frame.timestamp()) |
| .set_timestamp_ms(out_frame.render_time_ms()) |
| .set_rotation(out_frame.rotation()) |
| .set_id(out_frame.id()) |
| .set_update_rect(update_rect) |
| .build(); |
| } |
| |
| TRACE_EVENT1("webrtc", "VCMGenericEncoder::Encode", "timestamp", |
| out_frame.timestamp()); |
| |
| frame_encoder_timer_.OnEncodeStarted(out_frame.timestamp(), |
| out_frame.render_time_ms()); |
| |
| const int32_t encode_status = encoder_->Encode(out_frame, &next_frame_types_); |
| |
| if (encode_status < 0) { |
| RTC_LOG(LS_ERROR) << "Failed to encode frame. Error code: " |
| << encode_status; |
| return; |
| } |
| |
| for (auto& it : next_frame_types_) { |
| it = VideoFrameType::kVideoFrameDelta; |
| } |
| } |
| |
| void VideoStreamEncoder::SendKeyFrame() { |
| if (!encoder_queue_.IsCurrent()) { |
| encoder_queue_.PostTask([this] { SendKeyFrame(); }); |
| return; |
| } |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| TRACE_EVENT0("webrtc", "OnKeyFrameRequest"); |
| RTC_DCHECK(!next_frame_types_.empty()); |
| next_frame_types_[0] = VideoFrameType::kVideoFrameKey; |
| if (HasInternalSource()) { |
| // Try to request the frame if we have an external encoder with |
| // internal source since AddVideoFrame never will be called. |
| |
| // TODO(nisse): Used only with internal source. Delete as soon as |
| // that feature is removed. The only implementation I've been able |
| // to find ignores what's in the frame. With one exception: It seems |
| // a few test cases, e.g., |
| // VideoSendStreamTest.VideoSendStreamStopSetEncoderRateToZero, set |
| // internal_source to true and use FakeEncoder. And the latter will |
| // happily encode this 1x1 frame and pass it on down the pipeline. |
| if (encoder_->Encode(VideoFrame::Builder() |
| .set_video_frame_buffer(I420Buffer::Create(1, 1)) |
| .set_rotation(kVideoRotation_0) |
| .set_timestamp_us(0) |
| .build(), |
| &next_frame_types_) == WEBRTC_VIDEO_CODEC_OK) { |
| // Try to remove just-performed keyframe request, if stream still exists. |
| next_frame_types_[0] = VideoFrameType::kVideoFrameDelta; |
| } |
| } |
| } |
| |
| void VideoStreamEncoder::OnLossNotification( |
| const VideoEncoder::LossNotification& loss_notification) { |
| if (!encoder_queue_.IsCurrent()) { |
| encoder_queue_.PostTask( |
| [this, loss_notification] { OnLossNotification(loss_notification); }); |
| return; |
| } |
| |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| if (encoder_) { |
| encoder_->OnLossNotification(loss_notification); |
| } |
| } |
| |
| EncodedImageCallback::Result VideoStreamEncoder::OnEncodedImage( |
| const EncodedImage& encoded_image, |
| const CodecSpecificInfo* codec_specific_info, |
| const RTPFragmentationHeader* fragmentation) { |
| TRACE_EVENT_INSTANT1("webrtc", "VCMEncodedFrameCallback::Encoded", |
| "timestamp", encoded_image.Timestamp()); |
| const size_t spatial_idx = encoded_image.SpatialIndex().value_or(0); |
| EncodedImage image_copy(encoded_image); |
| |
| frame_encoder_timer_.FillTimingInfo( |
| spatial_idx, &image_copy, |
| rtc::TimeMicros() / rtc::kNumMicrosecsPerMillisec); |
| |
| // Piggyback ALR experiment group id and simulcast id into the content type. |
| const uint8_t experiment_id = |
| experiment_groups_[videocontenttypehelpers::IsScreenshare( |
| image_copy.content_type_)]; |
| |
| // TODO(ilnik): This will force content type extension to be present even |
| // for realtime video. At the expense of miniscule overhead we will get |
| // sliced receive statistics. |
| RTC_CHECK(videocontenttypehelpers::SetExperimentId(&image_copy.content_type_, |
| experiment_id)); |
| // We count simulcast streams from 1 on the wire. That's why we set simulcast |
| // id in content type to +1 of that is actual simulcast index. This is because |
| // value 0 on the wire is reserved for 'no simulcast stream specified'. |
| RTC_CHECK(videocontenttypehelpers::SetSimulcastId( |
| &image_copy.content_type_, static_cast<uint8_t>(spatial_idx + 1))); |
| |
| // Encoded is called on whatever thread the real encoder implementation run |
| // on. In the case of hardware encoders, there might be several encoders |
| // running in parallel on different threads. |
| encoder_stats_observer_->OnSendEncodedImage(image_copy, codec_specific_info); |
| |
| EncodedImageCallback::Result result = |
| sink_->OnEncodedImage(image_copy, codec_specific_info, fragmentation); |
| |
| // We are only interested in propagating the meta-data about the image, not |
| // encoded data itself, to the post encode function. Since we cannot be sure |
| // the pointer will still be valid when run on the task queue, set it to null. |
| image_copy.set_buffer(nullptr, 0); |
| |
| int temporal_index = 0; |
| if (codec_specific_info) { |
| if (codec_specific_info->codecType == kVideoCodecVP9) { |
| temporal_index = codec_specific_info->codecSpecific.VP9.temporal_idx; |
| } else if (codec_specific_info->codecType == kVideoCodecVP8) { |
| temporal_index = codec_specific_info->codecSpecific.VP8.temporalIdx; |
| } |
| } |
| if (temporal_index == kNoTemporalIdx) { |
| temporal_index = 0; |
| } |
| |
| RunPostEncode(image_copy, rtc::TimeMicros(), temporal_index); |
| |
| if (result.error == Result::OK) { |
| // In case of an internal encoder running on a separate thread, the |
| // decision to drop a frame might be a frame late and signaled via |
| // atomic flag. This is because we can't easily wait for the worker thread |
| // without risking deadlocks, eg during shutdown when the worker thread |
| // might be waiting for the internal encoder threads to stop. |
| if (pending_frame_drops_.load() > 0) { |
| int pending_drops = pending_frame_drops_.fetch_sub(1); |
| RTC_DCHECK_GT(pending_drops, 0); |
| result.drop_next_frame = true; |
| } |
| } |
| |
| return result; |
| } |
| |
| void VideoStreamEncoder::OnDroppedFrame(DropReason reason) { |
| switch (reason) { |
| case DropReason::kDroppedByMediaOptimizations: |
| encoder_stats_observer_->OnFrameDropped( |
| VideoStreamEncoderObserver::DropReason::kMediaOptimization); |
| encoder_queue_.PostTask([this] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| if (quality_scaler_) |
| quality_scaler_->ReportDroppedFrameByMediaOpt(); |
| }); |
| break; |
| case DropReason::kDroppedByEncoder: |
| encoder_stats_observer_->OnFrameDropped( |
| VideoStreamEncoderObserver::DropReason::kEncoder); |
| encoder_queue_.PostTask([this] { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| if (quality_scaler_) |
| quality_scaler_->ReportDroppedFrameByEncoder(); |
| }); |
| break; |
| } |
| } |
| |
| void VideoStreamEncoder::OnBitrateUpdated(DataRate target_bitrate, |
| DataRate link_allocation, |
| uint8_t fraction_lost, |
| int64_t round_trip_time_ms) { |
| RTC_DCHECK_GE(link_allocation, target_bitrate); |
| if (!encoder_queue_.IsCurrent()) { |
| encoder_queue_.PostTask([this, target_bitrate, link_allocation, |
| fraction_lost, round_trip_time_ms] { |
| OnBitrateUpdated(target_bitrate, link_allocation, fraction_lost, |
| round_trip_time_ms); |
| }); |
| return; |
| } |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| RTC_DCHECK(sink_) << "sink_ must be set before the encoder is active."; |
| |
| RTC_LOG(LS_VERBOSE) << "OnBitrateUpdated, bitrate " << target_bitrate.bps() |
| << " link allocation bitrate = " << link_allocation.bps() |
| << " packet loss " << static_cast<int>(fraction_lost) |
| << " rtt " << round_trip_time_ms; |
| // On significant changes to BWE at the start of the call, |
| // enable frame drops to quickly react to jumps in available bandwidth. |
| if (encoder_start_bitrate_bps_ != 0 && |
| !has_seen_first_significant_bwe_change_ && quality_scaler_ && |
| initial_framedrop_on_bwe_enabled_ && |
| abs_diff(target_bitrate.bps(), encoder_start_bitrate_bps_) >= |
| kFramedropThreshold * encoder_start_bitrate_bps_) { |
| // Reset initial framedrop feature when first real BW estimate arrives. |
| // TODO(kthelgason): Update BitrateAllocator to not call OnBitrateUpdated |
| // without an actual BW estimate. |
| initial_framedrop_ = 0; |
| has_seen_first_significant_bwe_change_ = true; |
| } |
| |
| if (encoder_) { |
| encoder_->OnPacketLossRateUpdate(static_cast<float>(fraction_lost) / 256.f); |
| encoder_->OnRttUpdate(round_trip_time_ms); |
| } |
| |
| uint32_t framerate_fps = GetInputFramerateFps(); |
| frame_dropper_.SetRates((target_bitrate.bps() + 500) / 1000, framerate_fps); |
| const bool video_is_suspended = target_bitrate == DataRate::Zero(); |
| const bool video_suspension_changed = video_is_suspended != EncoderPaused(); |
| |
| EncoderRateSettings new_rate_settings{VideoBitrateAllocation(), |
| static_cast<double>(framerate_fps), |
| link_allocation, target_bitrate}; |
| SetEncoderRates(UpdateBitrateAllocationAndNotifyObserver(new_rate_settings)); |
| |
| encoder_start_bitrate_bps_ = target_bitrate.bps() != 0 |
| ? target_bitrate.bps() |
| : encoder_start_bitrate_bps_; |
| |
| if (video_suspension_changed) { |
| RTC_LOG(LS_INFO) << "Video suspend state changed to: " |
| << (video_is_suspended ? "suspended" : "not suspended"); |
| encoder_stats_observer_->OnSuspendChange(video_is_suspended); |
| } |
| if (video_suspension_changed && !video_is_suspended && pending_frame_ && |
| !DropDueToSize(pending_frame_->size())) { |
| int64_t pending_time_us = rtc::TimeMicros() - pending_frame_post_time_us_; |
| if (pending_time_us < kPendingFrameTimeoutMs * 1000) |
| EncodeVideoFrame(*pending_frame_, pending_frame_post_time_us_); |
| pending_frame_.reset(); |
| } |
| } |
| |
| bool VideoStreamEncoder::DropDueToSize(uint32_t pixel_count) const { |
| if (initial_framedrop_ < kMaxInitialFramedrop && |
| encoder_start_bitrate_bps_ > 0) { |
| if (encoder_start_bitrate_bps_ < 300000 /* qvga */) { |
| return pixel_count > 320 * 240; |
| } else if (encoder_start_bitrate_bps_ < 500000 /* vga */) { |
| return pixel_count > 640 * 480; |
| } |
| } |
| return false; |
| } |
| |
| void VideoStreamEncoder::AdaptDown(AdaptReason reason) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| AdaptationRequest adaptation_request = { |
| last_frame_info_->pixel_count(), |
| encoder_stats_observer_->GetInputFrameRate(), |
| AdaptationRequest::Mode::kAdaptDown}; |
| |
| bool downgrade_requested = |
| last_adaptation_request_ && |
| last_adaptation_request_->mode_ == AdaptationRequest::Mode::kAdaptDown; |
| |
| switch (degradation_preference_) { |
| case DegradationPreference::BALANCED: |
| break; |
| case DegradationPreference::MAINTAIN_FRAMERATE: |
| if (downgrade_requested && |
| adaptation_request.input_pixel_count_ >= |
| last_adaptation_request_->input_pixel_count_) { |
| // Don't request lower resolution if the current resolution is not |
| // lower than the last time we asked for the resolution to be lowered. |
| return; |
| } |
| break; |
| case DegradationPreference::MAINTAIN_RESOLUTION: |
| if (adaptation_request.framerate_fps_ <= 0 || |
| (downgrade_requested && |
| adaptation_request.framerate_fps_ < kMinFramerateFps)) { |
| // If no input fps estimate available, can't determine how to scale down |
| // framerate. Otherwise, don't request lower framerate if we don't have |
| // a valid frame rate. Since framerate, unlike resolution, is a measure |
| // we have to estimate, and can fluctuate naturally over time, don't |
| // make the same kind of limitations as for resolution, but trust the |
| // overuse detector to not trigger too often. |
| return; |
| } |
| break; |
| case DegradationPreference::DISABLED: |
| return; |
| } |
| |
| switch (degradation_preference_) { |
| case DegradationPreference::BALANCED: { |
| // Try scale down framerate, if lower. |
| int fps = MinFps(last_frame_info_->pixel_count()); |
| if (source_proxy_->RestrictFramerate(fps)) { |
| GetAdaptCounter().IncrementFramerate(reason); |
| break; |
| } |
| // Scale down resolution. |
| RTC_FALLTHROUGH(); |
| } |
| case DegradationPreference::MAINTAIN_FRAMERATE: { |
| // Scale down resolution. |
| bool min_pixels_reached = false; |
| if (!source_proxy_->RequestResolutionLowerThan( |
| adaptation_request.input_pixel_count_, |
| encoder_->GetEncoderInfo().scaling_settings.min_pixels_per_frame, |
| &min_pixels_reached)) { |
| if (min_pixels_reached) |
| encoder_stats_observer_->OnMinPixelLimitReached(); |
| return; |
| } |
| GetAdaptCounter().IncrementResolution(reason); |
| break; |
| } |
| case DegradationPreference::MAINTAIN_RESOLUTION: { |
| // Scale down framerate. |
| const int requested_framerate = source_proxy_->RequestFramerateLowerThan( |
| adaptation_request.framerate_fps_); |
| if (requested_framerate == -1) |
| return; |
| RTC_DCHECK_NE(max_framerate_, -1); |
| overuse_detector_->OnTargetFramerateUpdated( |
| std::min(max_framerate_, requested_framerate)); |
| GetAdaptCounter().IncrementFramerate(reason); |
| break; |
| } |
| case DegradationPreference::DISABLED: |
| RTC_NOTREACHED(); |
| } |
| |
| last_adaptation_request_.emplace(adaptation_request); |
| |
| UpdateAdaptationStats(reason); |
| |
| RTC_LOG(LS_INFO) << GetConstAdaptCounter().ToString(); |
| } |
| |
| void VideoStreamEncoder::AdaptUp(AdaptReason reason) { |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| |
| const AdaptCounter& adapt_counter = GetConstAdaptCounter(); |
| int num_downgrades = adapt_counter.TotalCount(reason); |
| if (num_downgrades == 0) |
| return; |
| RTC_DCHECK_GT(num_downgrades, 0); |
| |
| AdaptationRequest adaptation_request = { |
| last_frame_info_->pixel_count(), |
| encoder_stats_observer_->GetInputFrameRate(), |
| AdaptationRequest::Mode::kAdaptUp}; |
| |
| bool adapt_up_requested = |
| last_adaptation_request_ && |
| last_adaptation_request_->mode_ == AdaptationRequest::Mode::kAdaptUp; |
| |
| if (degradation_preference_ == DegradationPreference::MAINTAIN_FRAMERATE) { |
| if (adapt_up_requested && |
| adaptation_request.input_pixel_count_ <= |
| last_adaptation_request_->input_pixel_count_) { |
| // Don't request higher resolution if the current resolution is not |
| // higher than the last time we asked for the resolution to be higher. |
| return; |
| } |
| } |
| |
| switch (degradation_preference_) { |
| case DegradationPreference::BALANCED: { |
| // Try scale up framerate, if higher. |
| int fps = MaxFps(last_frame_info_->pixel_count()); |
| if (source_proxy_->IncreaseFramerate(fps)) { |
| GetAdaptCounter().DecrementFramerate(reason, fps); |
| // Reset framerate in case of fewer fps steps down than up. |
| if (adapt_counter.FramerateCount() == 0 && |
| fps != std::numeric_limits<int>::max()) { |
| RTC_LOG(LS_INFO) << "Removing framerate down-scaling setting."; |
| source_proxy_->IncreaseFramerate(std::numeric_limits<int>::max()); |
| } |
| break; |
| } |
| // Scale up resolution. |
| RTC_FALLTHROUGH(); |
| } |
| case DegradationPreference::MAINTAIN_FRAMERATE: { |
| // Scale up resolution. |
| int pixel_count = adaptation_request.input_pixel_count_; |
| if (adapt_counter.ResolutionCount() == 1) { |
| RTC_LOG(LS_INFO) << "Removing resolution down-scaling setting."; |
| pixel_count = std::numeric_limits<int>::max(); |
| } |
| if (!source_proxy_->RequestHigherResolutionThan(pixel_count)) |
| return; |
| GetAdaptCounter().DecrementResolution(reason); |
| break; |
| } |
| case DegradationPreference::MAINTAIN_RESOLUTION: { |
| // Scale up framerate. |
| int fps = adaptation_request.framerate_fps_; |
| if (adapt_counter.FramerateCount() == 1) { |
| RTC_LOG(LS_INFO) << "Removing framerate down-scaling setting."; |
| fps = std::numeric_limits<int>::max(); |
| } |
| |
| const int requested_framerate = |
| source_proxy_->RequestHigherFramerateThan(fps); |
| if (requested_framerate == -1) { |
| overuse_detector_->OnTargetFramerateUpdated(max_framerate_); |
| return; |
| } |
| overuse_detector_->OnTargetFramerateUpdated( |
| std::min(max_framerate_, requested_framerate)); |
| GetAdaptCounter().DecrementFramerate(reason); |
| break; |
| } |
| case DegradationPreference::DISABLED: |
| return; |
| } |
| |
| last_adaptation_request_.emplace(adaptation_request); |
| |
| UpdateAdaptationStats(reason); |
| |
| RTC_LOG(LS_INFO) << adapt_counter.ToString(); |
| } |
| |
| // TODO(nisse): Delete, once AdaptReason and AdaptationReason are merged. |
| void VideoStreamEncoder::UpdateAdaptationStats(AdaptReason reason) { |
| switch (reason) { |
| case kCpu: |
| encoder_stats_observer_->OnAdaptationChanged( |
| VideoStreamEncoderObserver::AdaptationReason::kCpu, |
| GetActiveCounts(kCpu), GetActiveCounts(kQuality)); |
| break; |
| case kQuality: |
| encoder_stats_observer_->OnAdaptationChanged( |
| VideoStreamEncoderObserver::AdaptationReason::kQuality, |
| GetActiveCounts(kCpu), GetActiveCounts(kQuality)); |
| break; |
| } |
| } |
| |
| VideoStreamEncoderObserver::AdaptationSteps VideoStreamEncoder::GetActiveCounts( |
| AdaptReason reason) { |
| VideoStreamEncoderObserver::AdaptationSteps counts = |
| GetConstAdaptCounter().Counts(reason); |
| switch (reason) { |
| case kCpu: |
| if (!IsFramerateScalingEnabled(degradation_preference_)) |
| counts.num_framerate_reductions = absl::nullopt; |
| if (!IsResolutionScalingEnabled(degradation_preference_)) |
| counts.num_resolution_reductions = absl::nullopt; |
| break; |
| case kQuality: |
| if (!IsFramerateScalingEnabled(degradation_preference_) || |
| !quality_scaler_) { |
| counts.num_framerate_reductions = absl::nullopt; |
| } |
| if (!IsResolutionScalingEnabled(degradation_preference_) || |
| !quality_scaler_) { |
| counts.num_resolution_reductions = absl::nullopt; |
| } |
| break; |
| } |
| return counts; |
| } |
| |
| VideoStreamEncoder::AdaptCounter& VideoStreamEncoder::GetAdaptCounter() { |
| return adapt_counters_[degradation_preference_]; |
| } |
| |
| const VideoStreamEncoder::AdaptCounter& |
| VideoStreamEncoder::GetConstAdaptCounter() { |
| return adapt_counters_[degradation_preference_]; |
| } |
| |
| void VideoStreamEncoder::RunPostEncode(EncodedImage encoded_image, |
| int64_t time_sent_us, |
| int temporal_index) { |
| if (!encoder_queue_.IsCurrent()) { |
| encoder_queue_.PostTask( |
| [this, encoded_image, time_sent_us, temporal_index] { |
| RunPostEncode(encoded_image, time_sent_us, temporal_index); |
| }); |
| return; |
| } |
| |
| RTC_DCHECK_RUN_ON(&encoder_queue_); |
| |
| absl::optional<int> encode_duration_us; |
| if (encoded_image.timing_.flags != VideoSendTiming::kInvalid) { |
| encode_duration_us = |
| // TODO(nisse): Maybe use capture_time_ms_ rather than encode_start_ms_? |
| rtc::kNumMicrosecsPerMillisec * |
| (encoded_image.timing_.encode_finish_ms - |
| encoded_image.timing_.encode_start_ms); |
| } |
| |
| // Run post encode tasks, such as overuse detection and frame rate/drop |
| // stats for internal encoders. |
| const size_t frame_size = encoded_image.size(); |
| const bool keyframe = |
| encoded_image._frameType == VideoFrameType::kVideoFrameKey; |
| |
| if (frame_size > 0) { |
| frame_dropper_.Fill(frame_size, !keyframe); |
| } |
| |
| if (HasInternalSource()) { |
| // Update frame dropper after the fact for internal sources. |
| input_framerate_.Update(1u, clock_->TimeInMilliseconds()); |
| frame_dropper_.Leak(GetInputFramerateFps()); |
| // Signal to encoder to drop next frame. |
| if (frame_dropper_.DropFrame()) { |
| pending_frame_drops_.fetch_add(1); |
| } |
| } |
| |
| overuse_detector_->FrameSent( |
| encoded_image.Timestamp(), time_sent_us, |
| encoded_image.capture_time_ms_ * rtc::kNumMicrosecsPerMillisec, |
| encode_duration_us); |
| if (quality_scaler_ && encoded_image.qp_ >= 0) |
| quality_scaler_->ReportQp(encoded_image.qp_, time_sent_us); |
| if (bitrate_adjuster_) { |
| bitrate_adjuster_->OnEncodedFrame(encoded_image, temporal_index); |
| } |
| } |
| |
| bool VideoStreamEncoder::HasInternalSource() const { |
| // TODO(sprang): Checking both info from encoder and from encoder factory |
| // until we have deprecated and removed the encoder factory info. |
| return codec_info_.has_internal_source || encoder_info_.has_internal_source; |
| } |
| |
| void VideoStreamEncoder::ReleaseEncoder() { |
| if (!encoder_ || !encoder_initialized_) { |
| return; |
| } |
| encoder_->Release(); |
| encoder_initialized_ = false; |
| TRACE_EVENT0("webrtc", "VCMGenericEncoder::Release"); |
| } |
| |
| // Class holding adaptation information. |
| VideoStreamEncoder::AdaptCounter::AdaptCounter() { |
| fps_counters_.resize(kScaleReasonSize); |
| resolution_counters_.resize(kScaleReasonSize); |
| static_assert(kScaleReasonSize == 2, "Update MoveCount."); |
| } |
| |
| VideoStreamEncoder::AdaptCounter::~AdaptCounter() {} |
| |
| std::string VideoStreamEncoder::AdaptCounter::ToString() const { |
| rtc::StringBuilder ss; |
| ss << "Downgrade counts: fps: {" << ToString(fps_counters_); |
| ss << "}, resolution: {" << ToString(resolution_counters_) << "}"; |
| return ss.Release(); |
| } |
| |
| VideoStreamEncoderObserver::AdaptationSteps |
| VideoStreamEncoder::AdaptCounter::Counts(int reason) const { |
| VideoStreamEncoderObserver::AdaptationSteps counts; |
| counts.num_framerate_reductions = fps_counters_[reason]; |
| counts.num_resolution_reductions = resolution_counters_[reason]; |
| return counts; |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::IncrementFramerate(int reason) { |
| ++(fps_counters_[reason]); |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::IncrementResolution(int reason) { |
| ++(resolution_counters_[reason]); |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::DecrementFramerate(int reason) { |
| if (fps_counters_[reason] == 0) { |
| // Balanced mode: Adapt up is in a different order, switch reason. |
| // E.g. framerate adapt down: quality (2), framerate adapt up: cpu (3). |
| // 1. Down resolution (cpu): res={quality:0,cpu:1}, fps={quality:0,cpu:0} |
| // 2. Down fps (quality): res={quality:0,cpu:1}, fps={quality:1,cpu:0} |
| // 3. Up fps (cpu): res={quality:1,cpu:0}, fps={quality:0,cpu:0} |
| // 4. Up resolution (quality): res={quality:0,cpu:0}, fps={quality:0,cpu:0} |
| RTC_DCHECK_GT(TotalCount(reason), 0) << "No downgrade for reason."; |
| RTC_DCHECK_GT(FramerateCount(), 0) << "Framerate not downgraded."; |
| MoveCount(&resolution_counters_, reason); |
| MoveCount(&fps_counters_, (reason + 1) % kScaleReasonSize); |
| } |
| --(fps_counters_[reason]); |
| RTC_DCHECK_GE(fps_counters_[reason], 0); |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::DecrementResolution(int reason) { |
| if (resolution_counters_[reason] == 0) { |
| // Balanced mode: Adapt up is in a different order, switch reason. |
| RTC_DCHECK_GT(TotalCount(reason), 0) << "No downgrade for reason."; |
| RTC_DCHECK_GT(ResolutionCount(), 0) << "Resolution not downgraded."; |
| MoveCount(&fps_counters_, reason); |
| MoveCount(&resolution_counters_, (reason + 1) % kScaleReasonSize); |
| } |
| --(resolution_counters_[reason]); |
| RTC_DCHECK_GE(resolution_counters_[reason], 0); |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::DecrementFramerate(int reason, |
| int cur_fps) { |
| DecrementFramerate(reason); |
| // Reset if at max fps (i.e. in case of fewer steps up than down). |
| if (cur_fps == std::numeric_limits<int>::max()) |
| absl::c_fill(fps_counters_, 0); |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::FramerateCount() const { |
| return Count(fps_counters_); |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::ResolutionCount() const { |
| return Count(resolution_counters_); |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::FramerateCount(int reason) const { |
| return fps_counters_[reason]; |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::ResolutionCount(int reason) const { |
| return resolution_counters_[reason]; |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::TotalCount(int reason) const { |
| return FramerateCount(reason) + ResolutionCount(reason); |
| } |
| |
| int VideoStreamEncoder::AdaptCounter::Count( |
| const std::vector<int>& counters) const { |
| return absl::c_accumulate(counters, 0); |
| } |
| |
| void VideoStreamEncoder::AdaptCounter::MoveCount(std::vector<int>* counters, |
| int from_reason) { |
| int to_reason = (from_reason + 1) % kScaleReasonSize; |
| ++((*counters)[to_reason]); |
| --((*counters)[from_reason]); |
| } |
| |
| std::string VideoStreamEncoder::AdaptCounter::ToString( |
| const std::vector<int>& counters) const { |
| rtc::StringBuilder ss; |
| for (size_t reason = 0; reason < kScaleReasonSize; ++reason) { |
| ss << (reason ? " cpu" : "quality") << ":" << counters[reason]; |
| } |
| return ss.Release(); |
| } |
| |
| } // namespace webrtc |