| /* |
| * Copyright (c) 2014 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <limits> |
| |
| #include "webrtc/test/gtest.h" |
| #include "webrtc/common_audio/wav_header.h" |
| |
| namespace webrtc { |
| |
| // Doesn't take ownership of the buffer. |
| class ReadableWavBuffer : public ReadableWav { |
| public: |
| ReadableWavBuffer(const uint8_t* buf, size_t size) |
| : buf_(buf), |
| size_(size), |
| pos_(0), |
| buf_exhausted_(false), |
| check_read_size_(true) {} |
| ReadableWavBuffer(const uint8_t* buf, size_t size, bool check_read_size) |
| : buf_(buf), |
| size_(size), |
| pos_(0), |
| buf_exhausted_(false), |
| check_read_size_(check_read_size) {} |
| |
| virtual ~ReadableWavBuffer() { |
| // Verify the entire buffer has been read. |
| if (check_read_size_) |
| EXPECT_EQ(size_, pos_); |
| } |
| |
| virtual size_t Read(void* buf, size_t num_bytes) { |
| // Verify we don't try to read outside of a properly sized header. |
| if (size_ >= kWavHeaderSize) |
| EXPECT_GE(size_, pos_ + num_bytes); |
| EXPECT_FALSE(buf_exhausted_); |
| |
| const size_t bytes_remaining = size_ - pos_; |
| if (num_bytes > bytes_remaining) { |
| // The caller is signalled about an exhausted buffer when we return fewer |
| // bytes than requested. There should not be another read attempt after |
| // this point. |
| buf_exhausted_ = true; |
| num_bytes = bytes_remaining; |
| } |
| memcpy(buf, &buf_[pos_], num_bytes); |
| pos_ += num_bytes; |
| return num_bytes; |
| } |
| |
| private: |
| const uint8_t* buf_; |
| const size_t size_; |
| size_t pos_; |
| bool buf_exhausted_; |
| const bool check_read_size_; |
| }; |
| |
| // Try various choices of WAV header parameters, and make sure that the good |
| // ones are accepted and the bad ones rejected. |
| TEST(WavHeaderTest, CheckWavParameters) { |
| // Try some really stupid values for one parameter at a time. |
| EXPECT_TRUE(CheckWavParameters(1, 8000, kWavFormatPcm, 1, 0)); |
| EXPECT_FALSE(CheckWavParameters(0, 8000, kWavFormatPcm, 1, 0)); |
| EXPECT_FALSE(CheckWavParameters(0x10000, 8000, kWavFormatPcm, 1, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 0, kWavFormatPcm, 1, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 8000, WavFormat(0), 1, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 8000, kWavFormatPcm, 0, 0)); |
| |
| // Try invalid format/bytes-per-sample combinations. |
| EXPECT_TRUE(CheckWavParameters(1, 8000, kWavFormatPcm, 2, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 8000, kWavFormatPcm, 4, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 8000, kWavFormatALaw, 2, 0)); |
| EXPECT_FALSE(CheckWavParameters(1, 8000, kWavFormatMuLaw, 2, 0)); |
| |
| // Too large values. |
| EXPECT_FALSE(CheckWavParameters(1 << 20, 1 << 20, kWavFormatPcm, 1, 0)); |
| EXPECT_FALSE(CheckWavParameters( |
| 1, 8000, kWavFormatPcm, 1, std::numeric_limits<uint32_t>::max())); |
| |
| // Not the same number of samples for each channel. |
| EXPECT_FALSE(CheckWavParameters(3, 8000, kWavFormatPcm, 1, 5)); |
| } |
| |
| TEST(WavHeaderTest, ReadWavHeaderWithErrors) { |
| size_t num_channels = 0; |
| int sample_rate = 0; |
| WavFormat format = kWavFormatPcm; |
| size_t bytes_per_sample = 0; |
| size_t num_samples = 0; |
| |
| // Test a few ways the header can be invalid. We start with the valid header |
| // used in WriteAndReadWavHeader, and invalidate one field per test. The |
| // invalid field is indicated in the array name, and in the comments with |
| // *BAD*. |
| { |
| static const uint8_t kBadRiffID[] = { |
| 'R', 'i', 'f', 'f', // *BAD* |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 16, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| ReadableWavBuffer r(kBadRiffID, sizeof(kBadRiffID)); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kBadBitsPerSample[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 16, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 1, 0, // bits per sample: *BAD* |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| ReadableWavBuffer r(kBadBitsPerSample, sizeof(kBadBitsPerSample)); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kBadByteRate[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 16, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0x00, 0x33, 0x03, 0, // byte rate: *BAD* |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| ReadableWavBuffer r(kBadByteRate, sizeof(kBadByteRate)); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kBadFmtHeaderSize[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 17, 0, 0, 0, // size of fmt block *BAD*. Only 16 and 18 permitted. |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 0, // extra (though invalid) header byte |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| ReadableWavBuffer r(kBadFmtHeaderSize, sizeof(kBadFmtHeaderSize), false); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kNonZeroExtensionField[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 18, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 1, 0, // non-zero extension field *BAD* |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| ReadableWavBuffer r(kNonZeroExtensionField, sizeof(kNonZeroExtensionField), |
| false); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kMissingDataChunk[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 16, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| }; |
| ReadableWavBuffer r(kMissingDataChunk, sizeof(kMissingDataChunk)); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| { |
| static const uint8_t kMissingFmtAndDataChunks[] = { |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| }; |
| ReadableWavBuffer r(kMissingFmtAndDataChunks, |
| sizeof(kMissingFmtAndDataChunks)); |
| EXPECT_FALSE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| } |
| } |
| |
| // Try writing and reading a valid WAV header and make sure it looks OK. |
| TEST(WavHeaderTest, WriteAndReadWavHeader) { |
| static const int kSize = 4 + kWavHeaderSize + 4; |
| uint8_t buf[kSize]; |
| memset(buf, 0xa4, sizeof(buf)); |
| WriteWavHeader(buf + 4, 17, 12345, kWavFormatALaw, 1, 123457689); |
| static const uint8_t kExpectedBuf[] = { |
| 0xa4, 0xa4, 0xa4, 0xa4, // untouched bytes before header |
| 'R', 'I', 'F', 'F', |
| 0xbd, 0xd0, 0x5b, 0x07, // size of whole file - 8: 123457689 + 44 - 8 |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 16, 0, 0, 0, // size of fmt block - 8: 24 - 8 |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| 0xa4, 0xa4, 0xa4, 0xa4, // untouched bytes after header |
| }; |
| static_assert(sizeof(kExpectedBuf) == kSize, "buffer size"); |
| EXPECT_EQ(0, memcmp(kExpectedBuf, buf, kSize)); |
| |
| size_t num_channels = 0; |
| int sample_rate = 0; |
| WavFormat format = kWavFormatPcm; |
| size_t bytes_per_sample = 0; |
| size_t num_samples = 0; |
| ReadableWavBuffer r(buf + 4, sizeof(buf) - 8); |
| EXPECT_TRUE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| EXPECT_EQ(17u, num_channels); |
| EXPECT_EQ(12345, sample_rate); |
| EXPECT_EQ(kWavFormatALaw, format); |
| EXPECT_EQ(1u, bytes_per_sample); |
| EXPECT_EQ(123457689u, num_samples); |
| } |
| |
| // Try reading an atypical but valid WAV header and make sure it's parsed OK. |
| TEST(WavHeaderTest, ReadAtypicalWavHeader) { |
| static const uint8_t kBuf[] = { |
| 'R', 'I', 'F', 'F', |
| 0x3d, 0xd1, 0x5b, 0x07, // size of whole file - 8 + an extra 128 bytes of |
| // "metadata": 123457689 + 44 - 8 + 128. (atypical) |
| 'W', 'A', 'V', 'E', |
| 'f', 'm', 't', ' ', |
| 18, 0, 0, 0, // size of fmt block (with an atypical extension size field) |
| 6, 0, // format: A-law (6) |
| 17, 0, // channels: 17 |
| 0x39, 0x30, 0, 0, // sample rate: 12345 |
| 0xc9, 0x33, 0x03, 0, // byte rate: 1 * 17 * 12345 |
| 17, 0, // block align: NumChannels * BytesPerSample |
| 8, 0, // bits per sample: 1 * 8 |
| 0, 0, // zero extension size field (atypical) |
| 'd', 'a', 't', 'a', |
| 0x99, 0xd0, 0x5b, 0x07, // size of payload: 123457689 |
| }; |
| |
| size_t num_channels = 0; |
| int sample_rate = 0; |
| WavFormat format = kWavFormatPcm; |
| size_t bytes_per_sample = 0; |
| size_t num_samples = 0; |
| ReadableWavBuffer r(kBuf, sizeof(kBuf)); |
| EXPECT_TRUE( |
| ReadWavHeader(&r, &num_channels, &sample_rate, &format, |
| &bytes_per_sample, &num_samples)); |
| EXPECT_EQ(17u, num_channels); |
| EXPECT_EQ(12345, sample_rate); |
| EXPECT_EQ(kWavFormatALaw, format); |
| EXPECT_EQ(1u, bytes_per_sample); |
| EXPECT_EQ(123457689u, num_samples); |
| } |
| |
| } // namespace webrtc |