| /* |
| * Copyright (c) 2015 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #ifndef CALL_BITRATE_ALLOCATOR_H_ |
| #define CALL_BITRATE_ALLOCATOR_H_ |
| |
| #include <stdint.h> |
| |
| #include <map> |
| #include <memory> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include "api/call/bitrate_allocation.h" |
| #include "api/sequence_checker.h" |
| #include "api/transport/network_types.h" |
| #include "rtc_base/system/no_unique_address.h" |
| |
| namespace webrtc { |
| |
| class Clock; |
| |
| // Used by all send streams with adaptive bitrate, to get the currently |
| // allocated bitrate for the send stream. The current network properties are |
| // given at the same time, to let the send stream decide about possible loss |
| // protection. |
| class BitrateAllocatorObserver { |
| public: |
| // Returns the amount of protection used by the BitrateAllocatorObserver |
| // implementation, as bitrate in bps. |
| virtual uint32_t OnBitrateUpdated(BitrateAllocationUpdate update) = 0; |
| |
| protected: |
| virtual ~BitrateAllocatorObserver() {} |
| }; |
| |
| // Struct describing parameters for how a media stream should get bitrate |
| // allocated to it. |
| |
| struct MediaStreamAllocationConfig { |
| // Minimum bitrate supported by track. 0 equals no min bitrate. |
| uint32_t min_bitrate_bps; |
| // Maximum bitrate supported by track. 0 equals no max bitrate. |
| uint32_t max_bitrate_bps; |
| uint32_t pad_up_bitrate_bps; |
| int64_t priority_bitrate_bps; |
| // True means track may not be paused by allocating 0 bitrate will allocate at |
| // least `min_bitrate_bps` for this observer, even if the BWE is too low, |
| // false will allocate 0 to the observer if BWE doesn't allow |
| // `min_bitrate_bps`. |
| bool enforce_min_bitrate; |
| // The amount of bitrate allocated to this observer relative to all other |
| // observers. If an observer has twice the bitrate_priority of other |
| // observers, it should be allocated twice the bitrate above its min. |
| double bitrate_priority; |
| }; |
| |
| // Interface used for mocking |
| class BitrateAllocatorInterface { |
| public: |
| virtual void AddObserver(BitrateAllocatorObserver* observer, |
| MediaStreamAllocationConfig config) = 0; |
| virtual void RemoveObserver(BitrateAllocatorObserver* observer) = 0; |
| virtual int GetStartBitrate(BitrateAllocatorObserver* observer) const = 0; |
| |
| protected: |
| virtual ~BitrateAllocatorInterface() = default; |
| }; |
| |
| namespace bitrate_allocator_impl { |
| struct AllocatableTrack { |
| AllocatableTrack(BitrateAllocatorObserver* observer, |
| MediaStreamAllocationConfig allocation_config) |
| : observer(observer), |
| config(allocation_config), |
| allocated_bitrate_bps(-1), |
| media_ratio(1.0) {} |
| BitrateAllocatorObserver* observer; |
| MediaStreamAllocationConfig config; |
| int64_t allocated_bitrate_bps; |
| double media_ratio; // Part of the total bitrate used for media [0.0, 1.0]. |
| |
| uint32_t LastAllocatedBitrate() const; |
| // The minimum bitrate required by this observer, including |
| // enable-hysteresis if the observer is in a paused state. |
| uint32_t MinBitrateWithHysteresis() const; |
| }; |
| } // namespace bitrate_allocator_impl |
| |
| // Usage: this class will register multiple RtcpBitrateObserver's one at each |
| // RTCP module. It will aggregate the results and run one bandwidth estimation |
| // and push the result to the encoders via BitrateAllocatorObserver(s). |
| class BitrateAllocator : public BitrateAllocatorInterface { |
| public: |
| // Used to get notified when send stream limits such as the minimum send |
| // bitrate and max padding bitrate is changed. |
| class LimitObserver { |
| public: |
| virtual void OnAllocationLimitsChanged(BitrateAllocationLimits limits) = 0; |
| |
| protected: |
| virtual ~LimitObserver() = default; |
| }; |
| |
| explicit BitrateAllocator(LimitObserver* limit_observer); |
| ~BitrateAllocator() override; |
| |
| void UpdateStartRate(uint32_t start_rate_bps); |
| |
| // Allocate target_bitrate across the registered BitrateAllocatorObservers. |
| void OnNetworkEstimateChanged(TargetTransferRate msg); |
| |
| // Set the configuration used by the bandwidth management. |
| // `observer` updates bitrates if already in use. |
| // `config` is the configuration to use for allocation. |
| // Note that `observer`->OnBitrateUpdated() will be called |
| // within the scope of this method with the current rtt, fraction_loss and |
| // available bitrate and that the bitrate in OnBitrateUpdated will be zero if |
| // the `observer` is currently not allowed to send data. |
| void AddObserver(BitrateAllocatorObserver* observer, |
| MediaStreamAllocationConfig config) override; |
| |
| // Removes a previously added observer, but will not trigger a new bitrate |
| // allocation. |
| void RemoveObserver(BitrateAllocatorObserver* observer) override; |
| |
| // Returns initial bitrate allocated for `observer`. If `observer` is not in |
| // the list of added observers, a best guess is returned. |
| int GetStartBitrate(BitrateAllocatorObserver* observer) const override; |
| |
| private: |
| using AllocatableTrack = bitrate_allocator_impl::AllocatableTrack; |
| |
| // Calculates the minimum requested send bitrate and max padding bitrate and |
| // calls LimitObserver::OnAllocationLimitsChanged. |
| void UpdateAllocationLimits() RTC_RUN_ON(&sequenced_checker_); |
| |
| // Allow packets to be transmitted in up to 2 times max video bitrate if the |
| // bandwidth estimate allows it. |
| // TODO(bugs.webrtc.org/8541): May be worth to refactor to keep this logic in |
| // video send stream. |
| static uint8_t GetTransmissionMaxBitrateMultiplier(); |
| |
| RTC_NO_UNIQUE_ADDRESS SequenceChecker sequenced_checker_; |
| LimitObserver* const limit_observer_ RTC_GUARDED_BY(&sequenced_checker_); |
| // Stored in a list to keep track of the insertion order. |
| std::vector<AllocatableTrack> allocatable_tracks_ |
| RTC_GUARDED_BY(&sequenced_checker_); |
| uint32_t last_target_bps_ RTC_GUARDED_BY(&sequenced_checker_); |
| uint32_t last_stable_target_bps_ RTC_GUARDED_BY(&sequenced_checker_); |
| uint32_t last_non_zero_bitrate_bps_ RTC_GUARDED_BY(&sequenced_checker_); |
| uint8_t last_fraction_loss_ RTC_GUARDED_BY(&sequenced_checker_); |
| int64_t last_rtt_ RTC_GUARDED_BY(&sequenced_checker_); |
| int64_t last_bwe_period_ms_ RTC_GUARDED_BY(&sequenced_checker_); |
| // Number of mute events based on too low BWE, not network up/down. |
| int num_pause_events_ RTC_GUARDED_BY(&sequenced_checker_); |
| int64_t last_bwe_log_time_ RTC_GUARDED_BY(&sequenced_checker_); |
| BitrateAllocationLimits current_limits_ RTC_GUARDED_BY(&sequenced_checker_); |
| }; |
| |
| } // namespace webrtc |
| #endif // CALL_BITRATE_ALLOCATOR_H_ |