| /* |
| * Copyright (c) 2014 The WebRTC project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <iostream> |
| #include <memory> |
| |
| #include <string.h> |
| |
| #include "webrtc/modules/audio_processing/include/audio_processing.h" |
| #include "webrtc/modules/audio_processing/test/aec_dump_based_simulator.h" |
| #include "webrtc/modules/audio_processing/test/audio_processing_simulator.h" |
| #include "webrtc/modules/audio_processing/test/wav_based_simulator.h" |
| #include "webrtc/rtc_base/flags.h" |
| |
| namespace webrtc { |
| namespace test { |
| namespace { |
| |
| const int kParameterNotSpecifiedValue = -10000; |
| |
| const char kUsageDescription[] = |
| "Usage: audioproc_f [options] -i <input.wav>\n" |
| " or\n" |
| " audioproc_f [options] -dump_input <aec_dump>\n" |
| "\n\n" |
| "Command-line tool to simulate a call using the audio " |
| "processing module, either based on wav files or " |
| "protobuf debug dump recordings.\n"; |
| |
| DEFINE_string(dump_input, "", "Aec dump input filename"); |
| DEFINE_string(dump_output, "", "Aec dump output filename"); |
| DEFINE_string(i, "", "Forward stream input wav filename"); |
| DEFINE_string(o, "", "Forward stream output wav filename"); |
| DEFINE_string(ri, "", "Reverse stream input wav filename"); |
| DEFINE_string(ro, "", "Reverse stream output wav filename"); |
| DEFINE_string(artificial_nearend, "", "Artificial nearend wav filename"); |
| DEFINE_int(output_num_channels, |
| kParameterNotSpecifiedValue, |
| "Number of forward stream output channels"); |
| DEFINE_int(reverse_output_num_channels, |
| kParameterNotSpecifiedValue, |
| "Number of Reverse stream output channels"); |
| DEFINE_int(output_sample_rate_hz, |
| kParameterNotSpecifiedValue, |
| "Forward stream output sample rate in Hz"); |
| DEFINE_int(reverse_output_sample_rate_hz, |
| kParameterNotSpecifiedValue, |
| "Reverse stream output sample rate in Hz"); |
| DEFINE_string(mic_positions, |
| "", |
| "Space delimited cartesian coordinates of microphones in " |
| "meters. The coordinates of each point are contiguous. For a " |
| "two element array: \"x1 y1 z1 x2 y2 z2\""); |
| DEFINE_int(target_angle_degrees, |
| 90, |
| "The azimuth of the target in degrees (0-359). Only applies to " |
| "beamforming."); |
| DEFINE_bool(fixed_interface, |
| false, |
| "Use the fixed interface when operating on wav files"); |
| DEFINE_int(aec, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the echo canceller"); |
| DEFINE_int(aecm, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the mobile echo controller"); |
| DEFINE_int(ed, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate (0) the residual echo detector"); |
| DEFINE_string(ed_graph, "", "Output filename for graph of echo likelihood"); |
| DEFINE_int(agc, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the AGC"); |
| DEFINE_int(agc2, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the AGC2"); |
| DEFINE_int(hpf, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the high-pass filter"); |
| DEFINE_int(ns, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the noise suppressor"); |
| DEFINE_int(ts, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the transient suppressor"); |
| DEFINE_int(bf, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the beamformer"); |
| DEFINE_int(ie, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the intelligibility enhancer"); |
| DEFINE_int(vad, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the voice activity detector"); |
| DEFINE_int(le, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the level estimator"); |
| DEFINE_bool(all_default, |
| false, |
| "Activate all of the default components (will be overridden by any " |
| "other settings)"); |
| DEFINE_int(aec_suppression_level, |
| kParameterNotSpecifiedValue, |
| "Set the aec suppression level (0-2)"); |
| DEFINE_int(delay_agnostic, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the AEC delay agnostic mode"); |
| DEFINE_int(extended_filter, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the AEC extended filter mode"); |
| DEFINE_int(drift_compensation, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the drift compensation"); |
| DEFINE_int(aec3, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the experimental AEC mode AEC3"); |
| DEFINE_int(lc, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the level control"); |
| DEFINE_int(experimental_agc, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the experimental AGC"); |
| DEFINE_int( |
| refined_adaptive_filter, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the refined adaptive filter functionality"); |
| DEFINE_int(aecm_routing_mode, |
| kParameterNotSpecifiedValue, |
| "Specify the AECM routing mode (0-4)"); |
| DEFINE_int(aecm_comfort_noise, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the AECM comfort noise"); |
| DEFINE_int(agc_mode, |
| kParameterNotSpecifiedValue, |
| "Specify the AGC mode (0-2)"); |
| DEFINE_int(agc_target_level, |
| kParameterNotSpecifiedValue, |
| "Specify the AGC target level (0-31)"); |
| DEFINE_int(agc_limiter, |
| kParameterNotSpecifiedValue, |
| "Activate (1) or deactivate(0) the level estimator"); |
| DEFINE_int(agc_compression_gain, |
| kParameterNotSpecifiedValue, |
| "Specify the AGC compression gain (0-90)"); |
| DEFINE_int(vad_likelihood, |
| kParameterNotSpecifiedValue, |
| "Specify the VAD likelihood (0-3)"); |
| DEFINE_int(ns_level, |
| kParameterNotSpecifiedValue, |
| "Specify the NS level (0-3)"); |
| DEFINE_int(stream_delay, |
| kParameterNotSpecifiedValue, |
| "Specify the stream delay in ms to use"); |
| DEFINE_int(stream_drift_samples, |
| kParameterNotSpecifiedValue, |
| "Specify the number of stream drift samples to use"); |
| DEFINE_bool(performance_report, false, "Report the APM performance "); |
| DEFINE_bool(verbose, false, "Produce verbose output"); |
| DEFINE_bool(bitexactness_report, |
| false, |
| "Report bitexactness for aec dump result reproduction"); |
| DEFINE_bool(discard_settings_in_aecdump, |
| false, |
| "Discard any config settings specified in the aec dump"); |
| DEFINE_bool(store_intermediate_output, |
| false, |
| "Creates new output files after each init"); |
| DEFINE_string(custom_call_order_file, "", "Custom process API call order file"); |
| DEFINE_bool(help, false, "Print this message"); |
| |
| void SetSettingIfSpecified(const std::string& value, |
| rtc::Optional<std::string>* parameter) { |
| if (value.compare("") != 0) { |
| *parameter = rtc::Optional<std::string>(value); |
| } |
| } |
| |
| void SetSettingIfSpecified(int value, rtc::Optional<int>* parameter) { |
| if (value != kParameterNotSpecifiedValue) { |
| *parameter = rtc::Optional<int>(value); |
| } |
| } |
| |
| void SetSettingIfFlagSet(int32_t flag, rtc::Optional<bool>* parameter) { |
| if (flag == 0) { |
| *parameter = rtc::Optional<bool>(false); |
| } else if (flag == 1) { |
| *parameter = rtc::Optional<bool>(true); |
| } |
| } |
| |
| SimulationSettings CreateSettings() { |
| SimulationSettings settings; |
| if (FLAG_all_default) { |
| settings.use_le = rtc::Optional<bool>(true); |
| settings.use_vad = rtc::Optional<bool>(true); |
| settings.use_ie = rtc::Optional<bool>(false); |
| settings.use_bf = rtc::Optional<bool>(false); |
| settings.use_ts = rtc::Optional<bool>(true); |
| settings.use_ns = rtc::Optional<bool>(true); |
| settings.use_hpf = rtc::Optional<bool>(true); |
| settings.use_agc = rtc::Optional<bool>(true); |
| settings.use_aec = rtc::Optional<bool>(true); |
| settings.use_aecm = rtc::Optional<bool>(false); |
| settings.use_ed = rtc::Optional<bool>(false); |
| } |
| SetSettingIfSpecified(FLAG_dump_input, &settings.aec_dump_input_filename); |
| SetSettingIfSpecified(FLAG_dump_output, &settings.aec_dump_output_filename); |
| SetSettingIfSpecified(FLAG_i, &settings.input_filename); |
| SetSettingIfSpecified(FLAG_o, &settings.output_filename); |
| SetSettingIfSpecified(FLAG_ri, &settings.reverse_input_filename); |
| SetSettingIfSpecified(FLAG_ro, &settings.reverse_output_filename); |
| SetSettingIfSpecified(FLAG_artificial_nearend, |
| &settings.artificial_nearend_filename); |
| SetSettingIfSpecified(FLAG_output_num_channels, |
| &settings.output_num_channels); |
| SetSettingIfSpecified(FLAG_reverse_output_num_channels, |
| &settings.reverse_output_num_channels); |
| SetSettingIfSpecified(FLAG_output_sample_rate_hz, |
| &settings.output_sample_rate_hz); |
| SetSettingIfSpecified(FLAG_reverse_output_sample_rate_hz, |
| &settings.reverse_output_sample_rate_hz); |
| SetSettingIfSpecified(FLAG_mic_positions, &settings.microphone_positions); |
| settings.target_angle_degrees = FLAG_target_angle_degrees; |
| SetSettingIfFlagSet(FLAG_aec, &settings.use_aec); |
| SetSettingIfFlagSet(FLAG_aecm, &settings.use_aecm); |
| SetSettingIfFlagSet(FLAG_ed, &settings.use_ed); |
| SetSettingIfSpecified(FLAG_ed_graph, &settings.ed_graph_output_filename); |
| SetSettingIfFlagSet(FLAG_agc, &settings.use_agc); |
| SetSettingIfFlagSet(FLAG_agc2, &settings.use_agc2); |
| SetSettingIfFlagSet(FLAG_hpf, &settings.use_hpf); |
| SetSettingIfFlagSet(FLAG_ns, &settings.use_ns); |
| SetSettingIfFlagSet(FLAG_ts, &settings.use_ts); |
| SetSettingIfFlagSet(FLAG_bf, &settings.use_bf); |
| SetSettingIfFlagSet(FLAG_ie, &settings.use_ie); |
| SetSettingIfFlagSet(FLAG_vad, &settings.use_vad); |
| SetSettingIfFlagSet(FLAG_le, &settings.use_le); |
| SetSettingIfSpecified(FLAG_aec_suppression_level, |
| &settings.aec_suppression_level); |
| SetSettingIfFlagSet(FLAG_delay_agnostic, &settings.use_delay_agnostic); |
| SetSettingIfFlagSet(FLAG_extended_filter, &settings.use_extended_filter); |
| SetSettingIfFlagSet(FLAG_drift_compensation, |
| &settings.use_drift_compensation); |
| SetSettingIfFlagSet(FLAG_refined_adaptive_filter, |
| &settings.use_refined_adaptive_filter); |
| |
| SetSettingIfFlagSet(FLAG_aec3, &settings.use_aec3); |
| SetSettingIfFlagSet(FLAG_lc, &settings.use_lc); |
| SetSettingIfFlagSet(FLAG_experimental_agc, &settings.use_experimental_agc); |
| SetSettingIfSpecified(FLAG_aecm_routing_mode, &settings.aecm_routing_mode); |
| SetSettingIfFlagSet(FLAG_aecm_comfort_noise, |
| &settings.use_aecm_comfort_noise); |
| SetSettingIfSpecified(FLAG_agc_mode, &settings.agc_mode); |
| SetSettingIfSpecified(FLAG_agc_target_level, &settings.agc_target_level); |
| SetSettingIfFlagSet(FLAG_agc_limiter, &settings.use_agc_limiter); |
| SetSettingIfSpecified(FLAG_agc_compression_gain, |
| &settings.agc_compression_gain); |
| SetSettingIfSpecified(FLAG_vad_likelihood, &settings.vad_likelihood); |
| SetSettingIfSpecified(FLAG_ns_level, &settings.ns_level); |
| SetSettingIfSpecified(FLAG_stream_delay, &settings.stream_delay); |
| SetSettingIfSpecified(FLAG_stream_drift_samples, |
| &settings.stream_drift_samples); |
| SetSettingIfSpecified(FLAG_custom_call_order_file, |
| &settings.custom_call_order_filename); |
| settings.report_performance = FLAG_performance_report; |
| settings.use_verbose_logging = FLAG_verbose; |
| settings.report_bitexactness = FLAG_bitexactness_report; |
| settings.discard_all_settings_in_aecdump = FLAG_discard_settings_in_aecdump; |
| settings.fixed_interface = FLAG_fixed_interface; |
| settings.store_intermediate_output = FLAG_store_intermediate_output; |
| |
| return settings; |
| } |
| |
| void ReportConditionalErrorAndExit(bool condition, const std::string& message) { |
| if (condition) { |
| std::cerr << message << std::endl; |
| exit(1); |
| } |
| } |
| |
| void PerformBasicParameterSanityChecks(const SimulationSettings& settings) { |
| if (settings.input_filename || settings.reverse_input_filename) { |
| ReportConditionalErrorAndExit(!!settings.aec_dump_input_filename, |
| "Error: The aec dump cannot be specified " |
| "together with input wav files!\n"); |
| |
| ReportConditionalErrorAndExit(!!settings.artificial_nearend_filename, |
| "Error: The artificial nearend cannot be " |
| "specified together with input wav files!\n"); |
| |
| ReportConditionalErrorAndExit(!settings.input_filename, |
| "Error: When operating at wav files, the " |
| "input wav filename must be " |
| "specified!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.reverse_output_filename && !settings.reverse_input_filename, |
| "Error: When operating at wav files, the reverse input wav filename " |
| "must be specified if the reverse output wav filename is specified!\n"); |
| } else { |
| ReportConditionalErrorAndExit(!settings.aec_dump_input_filename, |
| "Error: Either the aec dump or the wav " |
| "input files must be specified!\n"); |
| } |
| |
| ReportConditionalErrorAndExit( |
| settings.use_aec && *settings.use_aec && settings.use_aecm && |
| *settings.use_aecm, |
| "Error: The AEC and the AECM cannot be activated at the same time!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.output_sample_rate_hz && *settings.output_sample_rate_hz <= 0, |
| "Error: --output_sample_rate_hz must be positive!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.reverse_output_sample_rate_hz && |
| settings.output_sample_rate_hz && |
| *settings.output_sample_rate_hz <= 0, |
| "Error: --reverse_output_sample_rate_hz must be positive!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.output_num_channels && *settings.output_num_channels <= 0, |
| "Error: --output_num_channels must be positive!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.reverse_output_num_channels && |
| *settings.reverse_output_num_channels <= 0, |
| "Error: --reverse_output_num_channels must be positive!\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.use_bf && *settings.use_bf && !settings.microphone_positions, |
| "Error: --mic_positions must be specified when the beamformer is " |
| "activated.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.target_angle_degrees < 0 || settings.target_angle_degrees > 359, |
| "Error: -target_angle_degrees must be specified between 0 and 359.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.aec_suppression_level && |
| ((*settings.aec_suppression_level) < 0 || |
| (*settings.aec_suppression_level) > 2), |
| "Error: --aec_suppression_level must be specified between 0 and 2.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.aecm_routing_mode && ((*settings.aecm_routing_mode) < 0 || |
| (*settings.aecm_routing_mode) > 4), |
| "Error: --aecm_routing_mode must be specified between 0 and 4.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.agc_target_level && ((*settings.agc_target_level) < 0 || |
| (*settings.agc_target_level) > 31), |
| "Error: --agc_target_level must be specified between 0 and 31.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.agc_compression_gain && ((*settings.agc_compression_gain) < 0 || |
| (*settings.agc_compression_gain) > 90), |
| "Error: --agc_compression_gain must be specified between 0 and 90.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.vad_likelihood && |
| ((*settings.vad_likelihood) < 0 || (*settings.vad_likelihood) > 3), |
| "Error: --vad_likelihood must be specified between 0 and 3.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.ns_level && |
| ((*settings.ns_level) < 0 || (*settings.ns_level) > 3), |
| "Error: --ns_level must be specified between 0 and 3.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.report_bitexactness && !settings.aec_dump_input_filename, |
| "Error: --bitexactness_report can only be used when operating on an " |
| "aecdump\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.custom_call_order_filename && settings.aec_dump_input_filename, |
| "Error: --custom_call_order_file cannot be used when operating on an " |
| "aecdump\n"); |
| |
| auto valid_wav_name = [](const std::string& wav_file_name) { |
| if (wav_file_name.size() < 5) { |
| return false; |
| } |
| if ((wav_file_name.compare(wav_file_name.size() - 4, 4, ".wav") == 0) || |
| (wav_file_name.compare(wav_file_name.size() - 4, 4, ".WAV") == 0)) { |
| return true; |
| } |
| return false; |
| }; |
| |
| ReportConditionalErrorAndExit( |
| settings.input_filename && (!valid_wav_name(*settings.input_filename)), |
| "Error: --i must be a valid .wav file name.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.output_filename && (!valid_wav_name(*settings.output_filename)), |
| "Error: --o must be a valid .wav file name.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.reverse_input_filename && |
| (!valid_wav_name(*settings.reverse_input_filename)), |
| "Error: --ri must be a valid .wav file name.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.reverse_output_filename && |
| (!valid_wav_name(*settings.reverse_output_filename)), |
| "Error: --ro must be a valid .wav file name.\n"); |
| |
| ReportConditionalErrorAndExit( |
| settings.artificial_nearend_filename && |
| !valid_wav_name(*settings.artificial_nearend_filename), |
| "Error: --artifical_nearend must be a valid .wav file name.\n"); |
| } |
| |
| } // namespace |
| |
| int main(int argc, char* argv[]) { |
| if (rtc::FlagList::SetFlagsFromCommandLine(&argc, argv, true) || |
| FLAG_help || argc != 1) { |
| printf("%s", kUsageDescription); |
| if (FLAG_help) { |
| rtc::FlagList::Print(nullptr, false); |
| return 0; |
| } |
| return 1; |
| } |
| |
| SimulationSettings settings = CreateSettings(); |
| PerformBasicParameterSanityChecks(settings); |
| std::unique_ptr<AudioProcessingSimulator> processor; |
| |
| if (settings.aec_dump_input_filename) { |
| processor.reset(new AecDumpBasedSimulator(settings)); |
| } else { |
| processor.reset(new WavBasedSimulator(settings)); |
| } |
| |
| processor->Process(); |
| |
| if (settings.report_performance) { |
| const auto& proc_time = processor->proc_time(); |
| int64_t exec_time_us = proc_time.sum / rtc::kNumNanosecsPerMicrosec; |
| std::cout << std::endl |
| << "Execution time: " << exec_time_us * 1e-6 << " s, File time: " |
| << processor->get_num_process_stream_calls() * 1.f / |
| AudioProcessingSimulator::kChunksPerSecond |
| << std::endl |
| << "Time per fwd stream chunk (mean, max, min): " << std::endl |
| << exec_time_us * 1.f / processor->get_num_process_stream_calls() |
| << " us, " << 1.f * proc_time.max / rtc::kNumNanosecsPerMicrosec |
| << " us, " << 1.f * proc_time.min / rtc::kNumNanosecsPerMicrosec |
| << " us" << std::endl; |
| } |
| |
| if (settings.report_bitexactness && settings.aec_dump_input_filename) { |
| if (processor->OutputWasBitexact()) { |
| std::cout << "The processing was bitexact."; |
| } else { |
| std::cout << "The processing was not bitexact."; |
| } |
| } |
| |
| return 0; |
| } |
| |
| } // namespace test |
| } // namespace webrtc |
| |
| int main(int argc, char* argv[]) { |
| return webrtc::test::main(argc, argv); |
| } |
